App::Cpan - Online Linux Manual PageSection : 3
Updated : 2020-06-14
Source : perl v5.32.0
Note : Perl Programmers Reference Guide

NAMEApp::Cpan − easily interact with CPAN from the command line

SYNOPSIS​ # with arguments and no switches, installs specified modules ​ cpan module_name [ module_name ... ] ​ ​ # with switches, installs modules with extra behavior ​ cpan [−cfFimtTw] module_name [ module_name ... ] ​ ​ # use local::lib ​ cpan −I module_name [ module_name ... ] ​ ​ # one time mirror override for faster mirrors ​ cpan −p ... ​ ​ # with just the dot, install from the distribution in the ​ # current directory ​ cpan . ​ ​ # without arguments, starts CPAN.pm shell ​ cpan ​ ​ # without arguments, but some switches ​ cpan [−ahpruvACDLOPX]

DESCRIPTIONThis script provides a command interface (not a shell) to CPAN. At the moment it uses CPAN.pm to do the work, but it is not a one-shot command runner for CPAN.pm.

Options−a Creates a CPAN.pm autobundle with CPAN::Shell−>autobundle. −A module [ module ... ] Shows the primary maintainers for the specified modules. −c module Runs a `make clean` in the specified module's directories. −C module [ module ... ] Show the Changes files for the specified modules −D module [ module ... ] Show the module details. This prints one line for each out-of-date module (meaning, modules locally installed but have newer versions on CPAN). Each line has three columns: module name, local version, and CPAN version. −f Force the specified action, when it normally would have failed. Use this to install a module even if its tests fail. When you use this option, ​−i is not optional for installing a module when you need to force it: ​ % cpan −f −i Module::Foo −F Turn off CPAN.pm's attempts to lock anything. You should be careful with this since you might end up with multiple scripts trying to muck in the same directory. This isn't so much of a concern if you're loading a special config with −j, and that config sets up its own work directories. −g module [ module ... ] Downloads to the current directory the latest distribution of the module. −G module [ module ... ] UNIMPLEMENTED Download to the current directory the latest distribution of the modules, unpack each distribution, and create a git repository for each distribution. If you want this feature, check out Yanick Champoux's Git::CPAN::Patch distribution. −h Print a help message and exit. When you specify −h, it ignores all of the other options and arguments. −i module [ module ... ] Install the specified modules. With no other switches, this switch is implied. −I Load local::lib (think like −I for loading lib paths). Too bad ​−l was already taken. −j Config.pm Load the file that has the CPAN configuration data. This should have the same format as the standard CPAN/Config.pm file, which defines ​$CPAN::Config as an anonymous hash. If the file does not exist, cpan dies. −J Dump the configuration in the same format that CPAN.pm uses. This is useful for checking the configuration as well as using the dump as a starting point for a new, custom configuration. −l List all installed modules with their versions −L author [ author ... ] List the modules by the specified authors. −m Make the specified modules. −M mirror1,mirror2,... A comma-separated list of mirrors to use for just this run. The −P option can find them for you automatically. −n Do a dry run, but don't actually install anything. (unimplemented) −O Show the out-of-date modules. −p Ping the configured mirrors and print a report −P Find the best mirrors you could be using and use them for the current session. −r Recompiles dynamically loaded modules with CPAN::Shell−>recompile. −s Drop in the CPAN.pm shell. This command does this automatically if you don't specify any arguments. −t module [ module ... ] Run a `make test` on the specified modules. −T Do not test modules. Simply install them. −u Upgrade all installed modules. Blindly doing this can really break things, so keep a backup. −v Print the script version and CPAN.pm version then exit. −V Print detailed information about the cpan client. −w UNIMPLEMENTED Turn on cpan warnings. This checks various things, like directory permissions, and tells you about problems you might have. −x module [ module ... ] Find close matches to the named modules that you think you might have mistyped. This requires the optional installation of Text::Levenshtein or Text::Levenshtein::Damerau. −X Dump all the namespaces to standard output.

Examples​ # print a help message ​ cpan −h ​ ​ # print the version numbers ​ cpan −v ​ ​ # create an autobundle ​ cpan −a ​ ​ # recompile modules ​ cpan −r ​ ​ # upgrade all installed modules ​ cpan −u ​ ​ # install modules ( sole −i is optional ) ​ cpan −i Netscape::Booksmarks Business::ISBN ​ ​ # force install modules ( must use −i ) ​ cpan −fi CGI::Minimal URI ​ ​ # install modules but without testing them ​ cpan −Ti CGI::Minimal URI

Environment variablesThere are several components in CPAN.pm that use environment variables. The build tools, ExtUtils::MakeMaker and Module::Build use some, while others matter to the levels above them. Some of these are specified by the Perl Toolchain Gang: Lancaster Concensus: <https://github.com/Perl−Toolchain−Gang/toolchain−site/blob/master/lancaster−consensus.md> Oslo Concensus: <https://github.com/Perl−Toolchain−Gang/toolchain−site/blob/master/oslo−consensus.md> NONINTERACTIVE_TESTING Assume no one is paying attention and skips prompts for distributions that do that correctly. cpan(1) sets this to 1 unless it already has a value (even if that value is false). PERL_MM_USE_DEFAULT Use the default answer for a prompted questions. cpan(1) sets this to 1 unless it already has a value (even if that value is false). CPAN_OPTS As with PERL5OPT, a string of additional cpan(1) options to add to those you specify on the command line. CPANSCRIPT_LOGLEVEL The log level to use, with either the embedded, minimal logger or Log::Log4perl if it is installed. Possible values are the same as the Log::Log4perl levels: TRACE, DEBUG, INFO, WARN, ​ERROR, and FATAL. The default is INFO. GIT_COMMAND The path to the git binary to use for the Git features. The default is /usr/local/bin/git.

Methodsrun() Just do it. The run method returns 0 on success and a positive number on failure. See the section on EXIT CODES for details on the values. CPAN.pm sends all the good stuff either to STDOUT, or to a temp file if $CPAN::Be_Silent is set. I have to intercept that output so I can find out what happened. Stolen from File::Path::Expand

EXIT VALUESThe script exits with zero if it thinks that everything worked, or a positive number if it thinks that something failed. Note, however, that in some cases it has to divine a failure by the output of things it does not control. For now, the exit codes are vague: ​ 1 An unknown error ​ ​ 2 The was an external problem ​ ​ 4 There was an internal problem with the script ​ ​ 8 A module failed to install

TO DO* There is initial support for Log4perl if it is available, but I haven't gone through everything to make the NullLogger work out correctly if Log4perl is not installed. * When I capture CPAN.pm output, I need to check for errors and report them to the user. * Warnings switch * Check then exit

BUGS* none noted

SEE ALSOCPAN, App::cpanminus

SOURCE AVAILABILITYThis code is in Github in the CPAN.pm repository: ​ https://github.com/andk/cpanpm The source used to be tracked separately in another GitHub repo, but the canonical source is now in the above repo.

CREDITSJapheth Cleaver added the bits to allow a forced install (−f). Jim Brandt suggest and provided the initial implementation for the up-to-date and Changes features. Adam Kennedy pointed out that exit() causes problems on Windows where this script ends up with a .bat extension David Golden helps integrate this into the CPAN.pm repos. Jim Keenan fixed up various issues with _download

AUTHORbrian d foy, <bdfoy@cpan.org>

COPYRIGHTCopyright (c) 2001−2018, brian d foy, All Rights Reserved. You may redistribute this under the same terms as Perl itself.
0
Johanes Gumabo
Data Size   :   29,242 byte
man-App::Cpan.3Build   :   2024-12-05, 20:55   :  
Visitor Screen   :   x
Visitor Counter ( page / site )   :   3 / 170,862
Visitor ID   :     :  
Visitor IP   :   52.14.75.147   :  
Visitor Provider   :   AMAZON-02   :  
Provider Position ( lat x lon )   :   39.962500 x -83.006100   :   x
Provider Accuracy Radius ( km )   :   1000   :  
Provider City   :   Columbus   :  
Provider Province   :   Ohio ,   :   ,
Provider Country   :   United States   :  
Provider Continent   :   North America   :  
Visitor Recorder   :   Version   :  
Visitor Recorder   :   Library   :  
Online Linux Manual Page   :   Version   :   Online Linux Manual Page - Fedora.40 - march=x86-64 - mtune=generic - 24.12.05
Online Linux Manual Page   :   Library   :   lib_c - 24.10.03 - march=x86-64 - mtune=generic - Fedora.40
Online Linux Manual Page   :   Library   :   lib_m - 24.10.03 - march=x86-64 - mtune=generic - Fedora.40
Data Base   :   Version   :   Online Linux Manual Page Database - 24.04.13 - march=x86-64 - mtune=generic - fedora-38
Data Base   :   Library   :   lib_c - 23.02.07 - march=x86-64 - mtune=generic - fedora.36

Very long time ago, I have the best tutor, Wenzel Svojanovsky . If someone knows the email address of Wenzel Svojanovsky , please send an email to johanes_gumabo@yahoo.co.id .
If error, please print screen and send to johanes_gumabo@yahoo.co.id
Under development. Support me via PayPal.

ERROR : Need New Coding :         (parse_manual_page_|249|App::Cpan.3|36/37|el══─{─══.|.el══─{─══. ds -- \|\(em\| )         (htmlprn|149|App::Cpan.3|36/37|.el══─{─══. ds --  —  |.el══─{─══. ds -- \|\(em\| )         (parse_manual_page_|249|App::Cpan.3|43|br══─}─══|'br══─}─══ )         (htmlprn|149|App::Cpan.3|43|'br══─}─══ |'br══─}─══ )