BIO_ADDR - Online Linux Manual PageSection : 3
Updated : 2021-03-26
Source : 1.1.1k
Note : OpenSSL
NAMEBIO_ADDR, BIO_ADDR_new, BIO_ADDR_clear, BIO_ADDR_free, BIO_ADDR_rawmake, BIO_ADDR_family, BIO_ADDR_rawaddress, BIO_ADDR_rawport, BIO_ADDR_hostname_string, BIO_ADDR_service_string, BIO_ADDR_path_string − BIO_ADDR routines
SYNOPSIS​ #include <sys/types.h> ​ #include <openssl/bio.h> ​ ​ typedef union bio_addr_st BIO_ADDR; ​ ​ BIO_ADDR *BIO_ADDR_new(void); ​ void BIO_ADDR_free(BIO_ADDR *); ​ void BIO_ADDR_clear(BIO_ADDR *ap); ​ int BIO_ADDR_rawmake(BIO_ADDR *ap, int family, ​ const void *where, size_t wherelen, unsigned short port); ​ int BIO_ADDR_family(const BIO_ADDR *ap); ​ int BIO_ADDR_rawaddress(const BIO_ADDR *ap, void *p, size_t *l); ​ unsigned short BIO_ADDR_rawport(const BIO_ADDR *ap); ​ char *BIO_ADDR_hostname_string(const BIO_ADDR *ap, int numeric); ​ char *BIO_ADDR_service_string(const BIO_ADDR *ap, int numeric); ​ char *BIO_ADDR_path_string(const BIO_ADDR *ap);
DESCRIPTIONThe BIO_ADDR type is a wrapper around all types of socket addresses that OpenSSL deals with, currently transparently supporting AF_INET, AF_INET6 and AF_UNIX according to what's available on the platform at hand. ​BIO_ADDR_new() creates a new unfilled BIO_ADDR, to be used with routines that will fill it with information, such as ​BIO_accept_ex(). ​BIO_ADDR_free() frees a BIO_ADDR created with BIO_ADDR_new(). ​BIO_ADDR_clear() clears any data held within the provided BIO_ADDR and sets it back to an uninitialised state. ​BIO_ADDR_rawmake() takes a protocol family, a byte array of size wherelen with an address in network byte order pointed at by where and a port number in network byte order in port (except for the AF_UNIX protocol family, where port is meaningless and therefore ignored) and populates the given BIO_ADDR with them. In case this creates a AF_UNIX BIO_ADDR, wherelen is expected to be the length of the path string (not including the terminating ​NUL, such as the result of a call to strlen()). ​Read on about the addresses in ‟RAW ADDRESSES” below. ​BIO_ADDR_family() returns the protocol family of the given ​BIO_ADDR. The possible non-error results are one of the constants AF_INET, AF_INET6 and AF_UNIX. It will also return AF_UNSPEC if the ​BIO_ADDR has not been initialised. ​BIO_ADDR_rawaddress() will write the raw address of the given ​BIO_ADDR in the area pointed at by p if p is non-NULL, and will set *l to be the amount of bytes the raw address takes up if l is non-NULL. A technique to only find out the size of the address is a call with p set to NULL. The raw address will be in network byte order, most significant byte first. In case this is a AF_UNIX BIO_ADDR, l gets the length of the path string (not including the terminating NUL, such as the result of a call to strlen()). ​Read on about the addresses in ‟RAW ADDRESSES” below. ​BIO_ADDR_rawport() returns the raw port of the given BIO_ADDR. The raw port will be in network byte order. ​BIO_ADDR_hostname_string() returns a character string with the hostname of the given BIO_ADDR. If numeric is 1, the string will contain the numerical form of the address. This only works for ​BIO_ADDR of the protocol families AF_INET and AF_INET6. The returned string has been allocated on the heap and must be freed with OPENSSL_free(). ​BIO_ADDR_service_string() returns a character string with the service name of the port of the given BIO_ADDR. If numeric is 1, the string will contain the port number. This only works for BIO_ADDR of the protocol families AF_INET and AF_INET6. The returned string has been allocated on the heap and must be freed with OPENSSL_free(). ​BIO_ADDR_path_string() returns a character string with the path of the given BIO_ADDR. This only works for BIO_ADDR of the protocol family AF_UNIX. The returned string has been allocated on the heap and must be freed with OPENSSL_free().
RAW ADDRESSESBoth BIO_ADDR_rawmake() and BIO_ADDR_rawaddress() take a pointer to a network byte order address of a specific site. Internally, those are treated as a pointer to struct in_addr (for AF_INET), struct in6_addr (for AF_INET6) or char * (for AF_UNIX), all depending on the protocol family the address is for.
RETURN VALUESThe string producing functions BIO_ADDR_hostname_string(), ​BIO_ADDR_service_string() and BIO_ADDR_path_string() will return NULL on error and leave an error indication on the OpenSSL error stack. All other functions described here return 0 or NULL when the information they should return isn't available.
SEE ALSO​BIO_connect (3), BIO_s_connect (3)
COPYRIGHTCopyright 2016−2020 The OpenSSL Project Authors. All Rights Reserved. Licensed under the OpenSSL license (the ‟License”). You may not use this file except in compliance with the License. You can obtain a copy in the file LICENSE in the source distribution or at <https://www.openssl.org/source/license.html>. 0
Johanes Gumabo
Data Size   :   18,622 byte
man-B___IO_ADDR.3sslBuild   :   2024-12-05, 20:55   :  
Visitor Screen   :   x
Visitor Counter ( page / site )   :   6 / 170,529
Visitor ID   :     :  
Visitor IP   :   3.140.185.250   :  
Visitor Provider   :   AMAZON-02   :  
Provider Position ( lat x lon )   :   39.962500 x -83.006100   :   x
Provider Accuracy Radius ( km )   :   1000   :  
Provider City   :   Columbus   :  
Provider Province   :   Ohio ,   :   ,
Provider Country   :   United States   :  
Provider Continent   :   North America   :  
Visitor Recorder   :   Version   :  
Visitor Recorder   :   Library   :  
Online Linux Manual Page   :   Version   :   Online Linux Manual Page - Fedora.40 - march=x86-64 - mtune=generic - 24.12.05
Online Linux Manual Page   :   Library   :   lib_c - 24.10.03 - march=x86-64 - mtune=generic - Fedora.40
Online Linux Manual Page   :   Library   :   lib_m - 24.10.03 - march=x86-64 - mtune=generic - Fedora.40
Data Base   :   Version   :   Online Linux Manual Page Database - 24.04.13 - march=x86-64 - mtune=generic - fedora-38
Data Base   :   Library   :   lib_c - 23.02.07 - march=x86-64 - mtune=generic - fedora.36
Very long time ago, I have the best tutor, Wenzel Svojanovsky . If someone knows the email address of Wenzel Svojanovsky , please send an email to johanes_gumabo@yahoo.co.id .
If error, please print screen and send to johanes_gumabo@yahoo.co.id
Under development. Support me via PayPal.
ERROR : Need New Coding :         (parse_manual_page_|249|B___IO_ADDR.3ssl|36/37|el══─{─══.|.el══─{─══. ds -- \|\(em\| )         (htmlprn|149|B___IO_ADDR.3ssl|36/37|.el══─{─══. ds --  —  |.el══─{─══. ds -- \|\(em\| )         (parse_manual_page_|249|B___IO_ADDR.3ssl|43|br══─}─══|'br══─}─══ )         (htmlprn|149|B___IO_ADDR.3ssl|43|'br══─}─══ |'br══─}─══ )