BIO_F_BUFFER - Online Linux Manual PageSection : 3
Updated : 2021-03-26
Source : 1.1.1k
Note : OpenSSL
NAMEBIO_get_buffer_num_lines, BIO_set_read_buffer_size, BIO_set_write_buffer_size, BIO_set_buffer_size, BIO_set_buffer_read_data, BIO_f_buffer − buffering BIO
SYNOPSIS #include <openssl/bio.h>
const BIO_METHOD *BIO_f_buffer(void);
long BIO_get_buffer_num_lines(BIO *b);
long BIO_set_read_buffer_size(BIO *b, long size);
long BIO_set_write_buffer_size(BIO *b, long size);
long BIO_set_buffer_size(BIO *b, long size);
long BIO_set_buffer_read_data(BIO *b, void *buf, long num);
DESCRIPTIONBIO_f_buffer() returns the buffering BIO method. Data written to a buffering BIO is buffered and periodically written to the next BIO in the chain. Data read from a buffering BIO comes from an internal buffer which is filled from the next BIO in the chain. Both BIO_gets() and BIO_puts() are supported. Calling BIO_reset() on a buffering BIO clears any buffered data. BIO_get_buffer_num_lines() returns the number of lines currently buffered. BIO_set_read_buffer_size(), BIO_set_write_buffer_size() and BIO_set_buffer_size() set the read, write or both read and write buffer sizes to size. The initial buffer size is DEFAULT_BUFFER_SIZE, currently 4096. Any attempt to reduce the buffer size below DEFAULT_BUFFER_SIZE is ignored. Any buffered data is cleared when the buffer is resized. BIO_set_buffer_read_data() clears the read buffer and fills it with num bytes of buf. If num is larger than the current buffer size the buffer is expanded.
NOTESThese functions, other than BIO_f_buffer(), are implemented as macros. Buffering BIOs implement BIO_read_ex() and BIO_gets() by using BIO_read_ex() operations on the next BIO in the chain and storing the result in an internal buffer, from which bytes are given back to the caller as appropriate for the call; a BIO_gets() is guaranteed to give the caller a whole line, and BIO_read_ex() is guaranteed to give the caller the number of bytes it asks for, unless there's an error or end of communication is reached in the next BIO. By prepending a buffering BIO to a chain it is therefore possible to provide BIO_gets() or exact size BIO_read_ex() functionality if the following BIOs do not support it. Do not add more than one BIO_f_buffer() to a BIO chain. The result of doing so will force a full read of the size of the internal buffer of the top(), which is 4 KiB at a minimum. Data is only written to the next BIO in the chain when the write buffer fills or when BIO_flush() is called. It is therefore important to call BIO_flush() whenever any pending data should be written such as when removing a buffering BIO using BIO_pop(). BIO_flush() may need to be retried if the ultimate source/sink BIO is non blocking.
RETURN VALUESBIO_f_buffer() returns the buffering BIO method. BIO_get_buffer_num_lines() returns the number of lines buffered (may be 0). BIO_set_read_buffer_size(), BIO_set_write_buffer_size() and BIO_set_buffer_size() return 1 if the buffer was successfully resized or 0 for failure. BIO_set_buffer_read_data() returns 1 if the data was set correctly or 0 if there was an error.
SEE ALSObio (7), BIO_reset (3), BIO_flush (3), BIO_pop (3), BIO_ctrl (3).
COPYRIGHTCopyright 2000−2020 The OpenSSL Project Authors. All Rights Reserved. Licensed under the OpenSSL license (the ‟License”). You may not use this file except in compliance with the License. You can obtain a copy in the file LICENSE in the source distribution or at <https://www.openssl.org/source/license.html>. 0
Johanes Gumabo
Data Size : 13,417 byte
man-B___IO_f_buffer.3sslBuild : 2024-12-05, 20:55 :
Visitor Screen : x
Visitor Counter ( page / site ) : 2 / 170,156
Visitor ID : :
Visitor IP : 3.149.238.67 :
Visitor Provider : AMAZON-02 :
Provider Position ( lat x lon ) : 39.962500 x -83.006100 : x
Provider Accuracy Radius ( km ) : 1000 :
Provider City : Columbus :
Provider Province : Ohio , : ,
Provider Country : United States :
Provider Continent : North America :
Visitor Recorder : Version :
Visitor Recorder : Library :
Online Linux Manual Page : Version : Online Linux Manual Page - Fedora.40 - march=x86-64 - mtune=generic - 24.12.05
Online Linux Manual Page : Library : lib_c - 24.10.03 - march=x86-64 - mtune=generic - Fedora.40
Online Linux Manual Page : Library : lib_m - 24.10.03 - march=x86-64 - mtune=generic - Fedora.40
Data Base : Version : Online Linux Manual Page Database - 24.04.13 - march=x86-64 - mtune=generic - fedora-38
Data Base : Library : lib_c - 23.02.07 - march=x86-64 - mtune=generic - fedora.36
Very long time ago, I have the best tutor, Wenzel Svojanovsky . If someone knows the email address of Wenzel Svojanovsky , please send an email to johanes_gumabo@yahoo.co.id .
If error, please print screen and send to johanes_gumabo@yahoo.co.id
Under development. Support me via PayPal.
ERROR : Need New Coding : (parse_manual_page_|249|B___IO_f_buffer.3ssl|36/37|el══─{─══.|.el══─{─══. ds -- \|\(em\|
) (htmlprn|149|B___IO_f_buffer.3ssl|36/37|.el══─{─══. ds -- — |.el══─{─══. ds -- \|\(em\|
) (parse_manual_page_|249|B___IO_f_buffer.3ssl|43|br══─}─══|'br══─}─══
) (htmlprn|149|B___IO_f_buffer.3ssl|43|'br══─}─══ |'br══─}─══
)