DH_GENERATE_PARAMETERS - Online Linux Manual PageSection : 3
Updated : 2021-03-26
Source : 1.1.1k
Note : OpenSSL
NAMEDH_generate_parameters_ex, DH_generate_parameters, DH_check, DH_check_params, DH_check_ex, DH_check_params_ex, DH_check_pub_key_ex ​− generate and check Diffie−Hellman parameters
SYNOPSIS​ #include <openssl/dh.h> ​ ​ int DH_generate_parameters_ex(DH *dh, int prime_len, int generator, BN_GENCB *cb); ​ ​ int DH_check(DH *dh, int *codes); ​ int DH_check_params(DH *dh, int *codes); ​ ​ int DH_check_ex(const DH *dh); ​ int DH_check_params_ex(const DH *dh); ​ int DH_check_pub_key_ex(const DH *dh, const BIGNUM *pub_key); Deprecated: ​ #if OPENSSL_API_COMPAT < 0x00908000L ​ DH *DH_generate_parameters(int prime_len, int generator, ​ void (*callback)(int, int, void *), void *cb_arg); ​ #endif
DESCRIPTION​DH_generate_parameters_ex() generates Diffie-Hellman parameters that can be shared among a group of users, and stores them in the provided DH structure. The pseudo-random number generator must be seeded before calling it. The parameters generated by DH_generate_parameters_ex() should not be used in signature schemes. ​prime_len is the length in bits of the safe prime to be generated. ​generator is a small number > 1, typically 2 or 5. A callback function may be used to provide feedback about the progress of the key generation. If cb is not NULL, it will be called as described in BN_generate_prime (3) while a random prime number is generated, and when a prime has been found, BN_GENCB_call(cb, 3, 0) is called. See BN_generate_prime_ex (3) for information on the BN_GENCB_call() function. ​DH_generate_parameters() is similar to DH_generate_prime_ex() but expects an old-style callback function; see ​BN_generate_prime (3) for information on the old-style callback. ​DH_check_params() confirms that the p and g are likely enough to be valid. This is a lightweight check, if a more thorough check is needed, use ​DH_check(). The value of *codes is updated with any problems found. If *codes is zero then no problems were found, otherwise the following bits may be set: DH_CHECK_P_NOT_PRIME The parameter p has been determined to not being an odd prime. Note that the lack of this bit doesn't guarantee that p is a prime. DH_NOT_SUITABLE_GENERATOR The generator g is not suitable. Note that the lack of this bit doesn't guarantee that g is suitable, unless p is known to be a strong prime. ​DH_check() confirms that the Diffie-Hellman parameters dh are valid. The value of *codes is updated with any problems found. If *codes is zero then no problems were found, otherwise the following bits may be set: DH_CHECK_P_NOT_PRIME The parameter p is not prime. DH_CHECK_P_NOT_SAFE_PRIME The parameter p is not a safe prime and no q value is present. DH_UNABLE_TO_CHECK_GENERATOR The generator g cannot be checked for suitability. DH_NOT_SUITABLE_GENERATOR The generator g is not suitable. DH_CHECK_Q_NOT_PRIME The parameter q is not prime. DH_CHECK_INVALID_Q_VALUE The parameter q is invalid. DH_CHECK_INVALID_J_VALUE The parameter j is invalid. ​DH_check_ex(), DH_check_params() and DH_check_pub_key_ex() are similar to ​DH_check() and DH_check_params() respectively, but the error reasons are added to the thread's error queue instead of provided as return values from the function.
RETURN VALUES​DH_generate_parameters_ex(), DH_check() and DH_check_params() return 1 if the check could be performed, 0 otherwise. ​DH_generate_parameters() returns a pointer to the DH structure or NULL if the parameter generation fails. ​DH_check_ex(), DH_check_params() and DH_check_pub_key_ex() return 1 if the check is successful, 0 for failed. The error codes can be obtained by ERR_get_error (3).
SEE ALSO​DH_new (3), ERR_get_error (3), RAND_bytes (3), ​DH_free (3)
HISTORY​DH_generate_parameters() was deprecated in OpenSSL 0.9.8; use ​DH_generate_parameters_ex() instead.
COPYRIGHTCopyright 2000−2018 The OpenSSL Project Authors. All Rights Reserved. Licensed under the OpenSSL license (the ‟License”). You may not use this file except in compliance with the License. You can obtain a copy in the file LICENSE in the source distribution or at <https://www.openssl.org/source/license.html>. 0
Johanes Gumabo
Data Size   :   17,368 byte
man-DH_check.3sslBuild   :   2024-12-05, 20:55   :  
Visitor Screen   :   x
Visitor Counter ( page / site )   :   2 / 164,657
Visitor ID   :     :  
Visitor IP   :   18.219.81.129   :  
Visitor Provider   :   AMAZON-02   :  
Provider Position ( lat x lon )   :   39.962500 x -83.006100   :   x
Provider Accuracy Radius ( km )   :   1000   :  
Provider City   :   Columbus   :  
Provider Province   :   Ohio ,   :   ,
Provider Country   :   United States   :  
Provider Continent   :   North America   :  
Visitor Recorder   :   Version   :  
Visitor Recorder   :   Library   :  
Online Linux Manual Page   :   Version   :   Online Linux Manual Page - Fedora.40 - march=x86-64 - mtune=generic - 24.12.05
Online Linux Manual Page   :   Library   :   lib_c - 24.10.03 - march=x86-64 - mtune=generic - Fedora.40
Online Linux Manual Page   :   Library   :   lib_m - 24.10.03 - march=x86-64 - mtune=generic - Fedora.40
Data Base   :   Version   :   Online Linux Manual Page Database - 24.04.13 - march=x86-64 - mtune=generic - fedora-38
Data Base   :   Library   :   lib_c - 23.02.07 - march=x86-64 - mtune=generic - fedora.36
Very long time ago, I have the best tutor, Wenzel Svojanovsky . If someone knows the email address of Wenzel Svojanovsky , please send an email to johanes_gumabo@yahoo.co.id .
If error, please print screen and send to johanes_gumabo@yahoo.co.id
Under development. Support me via PayPal.
ERROR : Need New Coding :         (parse_manual_page_|249|D___H_check.3ssl|36/37|el══─{─══.|.el══─{─══. ds -- \|\(em\| )         (htmlprn|149|D___H_check.3ssl|36/37|.el══─{─══. ds --  —  |.el══─{─══. ds -- \|\(em\| )         (parse_manual_page_|249|D___H_check.3ssl|43|br══─}─══|'br══─}─══ )         (htmlprn|149|D___H_check.3ssl|43|'br══─}─══ |'br══─}─══ )