Locale::Recode - Online Linux Manual PageSection : 3
Updated : 2022-01-21
Source : perl v5.34.0
Note : User Contributed Perl Documentation

NAMELocale::Recode − Object−Oriented Portable Charset Conversion

SYNOPSIS​ use Locale::Recode; ​ ​ $cd = Locale::Recode−>new (from => 'UTF−8', ​ to => 'ISO−8859−1'); ​ ​ die $cd−>getError if $cd−>getError; ​ ​ $cd−>recode ($text) or die $cd−>getError; ​ ​ $mime_name = Locale::Recode−>resolveAlias ('latin−1'); ​ ​ $supported = Locale::Recode−>getSupported; ​ ​ $complete = Locale::Recode−>getCharsets;

DESCRIPTIONThis module provides routines that convert textual data from one codeset to another in a portable way. The module has been started before Encode(3) was written. It's main purpose today is to provide charset conversion even when Encode(3) is not available on the system. It should also work for older Perl versions without Unicode support. Internally Locale::Recode(3) will use Encode(3) whenever possible, to allow for a faster conversion and for a wider range of supported charsets, and will only fall back to the Perl implementation when ​Encode(3) is not available or does not support a particular charset that Locale::Recode(3) does. Locale::Recode(3) is part of libintl-perl, and it's main purpose is actually to implement a portable charset conversion framework for the message translation facilities described in Locale::TextDomain(3).

CONSTRUCTORThe constructor new() requires two named arguments: from The encoding of the original data. Case doesn't matter, aliases are resolved. to The target encoding. Again, case doesn't matter, and aliases are resolved. The constructor will never fail. In case of an error, the object's internal state is set to bad and it will refuse to do any conversions. You can inquire the reason for the failure with the method ​getError().

OBJECT METHODSThe following object methods are available. recode (STRING) Converts STRING from the source encoding into the destination encoding. In case of success, a truth value is returned, false otherwise. You can inquire the reason for the failure with the method getError(). getError Returns either false if the object is not in an error state or an error message.

CLASS METHODSThe object provides some additional class methods: getSupported Returns a reference to a list of all supported charsets. This may implicitely load additional Encode(3) conversions like ​Encode::HanExtra(3) which may produce considerable load on your system. The method is therefore not intended for regular use but rather for getting resp. displaying once a list of available encodings. The members of the list are all converted to uppercase! getCharsets Like getSupported() but also returns all available aliases.

SUPPORTED CHARSETSThe range of supported charsets is system-dependent. The following somewhat special charsets are always available: UTF−8 UTF−8 is available independently of your Perl version. For Perl 5.6 or better or in the presence of Encode(3), conversions are not done in Perl but with the interfaces provided by these facilities which are written in C, hence much faster. Encoding data into UTF−8 is fast, even if it is done in Perl. Decoding it in Perl may become quite slow. If you frequently have to decode UTF−8 with Locale::Recode you will probably want to make sure that you do that with Perl 5.6 or beter, or install Encode(3) to speed up things. INTERNAL UTF−8 is fast to write but hard to read for applications. It is therefore not the worst for internal string representation but not far from that. Locale::Recode(3) stores strings internally as a reference to an array of integer values like most programming languages (Perl is an exception) do, trading memory for performance. The integer values are the UCS−4 codes of the characters in host byte order. The encoding INTERNAL is directly availabe via Locale::Recode(3) but of course you should not really use it for data exchange, unless you know what you are doing. Locale::Recode(3) has native support for a plethora of other encodings, most of them 8 bit encodings that are fast to decode, including most encodings used on popular micros like the ISO−8859−* series of encodings, most Windows−* encodings (also known as CP*), Macintosh, Atari, etc.

NAMES AND ALIASESEach charset resp. encoding is available internally under a unique name. Whenever the information was available, the preferred MIME name (see <http://www.iana.org/assignments/character−sets/>) was chosen as the internal name. Alias handling is quite strict. The module does not make wild guesses at what you mean (What's the meaning of the acronym JIS is a valid alias for 7bit−jis in Encode(3) ....) but aims at providing common aliases only. The same applies to so-called aliases that are really mistakes, like utf8 for UTF−8. The module knows all aliases that are listed with the IANA character set registry (<http://www.iana.org/assignments/character−sets/>), plus those known to libiconv version 1.8, and a bunch of additional ones.

CONVERSION TABLESThe conversion tables have either been taken from official sources like the IANA or the Unicode Consortium, from Bruno Haible's libiconv, or from the sources of the GNU libc and the regression tests for libintl-perl will check for conformance here. For some encodings this data differs from Encode(3)'s data which would cause these tests to fail. In these cases, the module will not invoke the Encode(3) methods, but will fall back to the internal implementation for the sake of consistency. The few encodings that are affected are so simple that you will not experience any real performance penalty unless you convert large chunks of data. But the package is not really intended for such use anyway, and since Encode(3) is relatively new, I rather think that the differences are bugs in Encode which will be fixed soon.

BUGSThe module should provide fall back conversions for other Unicode encoding schemes like UCS−2, UCS−4 (big− and little-endian). The pure Perl UTF−8 decoder will not always handle corrupt UTF−8 correctly, especially at the end and at the beginning of the string. This is not likely to be fixed, since the module's intention is not to be a consistency checker for UTF−8 data.

AUTHORCopyright (C) 2002−2017 Guido Flohr <http://www.guido-flohr.net/> (<mailto:guido.flohr@cantanea.com>), all rights reserved. See the source code for details!code for details!

SEE ALSOEncode(3), iconv(3), iconv(1), recode(1), perl(1)

POD ERRORSHey! The above document had some coding errors, which are explained below: Around line 364: =cut found outside a pod block. Skipping to next block.
0
Johanes Gumabo
Data Size   :   20,638 byte
man-Locale::Recode.3pmBuild   :   2024-12-05, 20:55   :  
Visitor Screen   :   x
Visitor Counter ( page / site )   :   2 / 177,965
Visitor ID   :     :  
Visitor IP   :   3.12.34.96   :  
Visitor Provider   :   AMAZON-02   :  
Provider Position ( lat x lon )   :   39.962500 x -83.006100   :   x
Provider Accuracy Radius ( km )   :   1000   :  
Provider City   :   Columbus   :  
Provider Province   :   Ohio ,   :   ,
Provider Country   :   United States   :  
Provider Continent   :   North America   :  
Visitor Recorder   :   Version   :  
Visitor Recorder   :   Library   :  
Online Linux Manual Page   :   Version   :   Online Linux Manual Page - Fedora.40 - march=x86-64 - mtune=generic - 24.12.05
Online Linux Manual Page   :   Library   :   lib_c - 24.10.03 - march=x86-64 - mtune=generic - Fedora.40
Online Linux Manual Page   :   Library   :   lib_m - 24.10.03 - march=x86-64 - mtune=generic - Fedora.40
Data Base   :   Version   :   Online Linux Manual Page Database - 24.04.13 - march=x86-64 - mtune=generic - fedora-38
Data Base   :   Library   :   lib_c - 23.02.07 - march=x86-64 - mtune=generic - fedora.36

Very long time ago, I have the best tutor, Wenzel Svojanovsky . If someone knows the email address of Wenzel Svojanovsky , please send an email to johanes_gumabo@yahoo.co.id .
If error, please print screen and send to johanes_gumabo@yahoo.co.id
Under development. Support me via PayPal.

ERROR : Need New Coding :         (parse_manual_page_|249|Locale::Recode.3pm|36/37|el══─{─══.|.el══─{─══. ds -- \|\(em\| )         (htmlprn|149|Locale::Recode.3pm|36/37|.el══─{─══. ds --  —  |.el══─{─══. ds -- \|\(em\| )         (parse_manual_page_|249|Locale::Recode.3pm|43|br══─}─══|'br══─}─══ )         (htmlprn|149|Locale::Recode.3pm|43|'br══─}─══ |'br══─}─══ )