MPI_Neighbor_alltoallw - Online Linux Manual PageSection : 3
Updated : Jan 21, 2016
Source : 1.10.2
Note : Open MPI
NAMEMPI_Neighbor_alltoallw, MPI_Ineighbor_alltoallw − All processes send data of different types to, and receive data of different types from, all processes
SYNTAX
C Syntax#include <mpi.h>
int MPI_Neighbor_alltoallw(const void *sendbuf, const int sendcounts[],
const MPI_Aint sdispls[], const MPI_Datatype sendtypes[],
void *recvbuf, const int recvcounts[], const MPI_Aint rdispls[],
const MPI_Datatype recvtypes[], MPI_Comm comm)
int MPI_Ineighbor_alltoallw(const void *sendbuf, const int sendcounts[],
const MPI_Aint sdispls[], const MPI_Datatype sendtypes[],
void *recvbuf, const int recvcounts[], const MPI_Aint rdispls[],
const MPI_Datatype recvtypes[], MPI_Comm comm, MPI_Request *request)
Fortran SyntaxINCLUDE 'mpif.h'
MPI_NEIGHBOR_ALLTOALLW(SENDBUF, SENDCOUNTS, SDISPLS, SENDTYPES,
RECVBUF, RECVCOUNTS, RDISPLS, RECVTYPES, COMM, IERROR)
<type> SENDBUF(*), RECVBUF(*)
INTEGER SENDCOUNTS(*), SENDTYPES(*)
INTEGER RECVCOUNTS(*), RECVTYPES(*)
INTEGER(KIND=MPI_ADDRESS_KIND) SDISPLS(*), RDISPLS(*)
INTEGER COMM, IERROR
MPI_INEIGHBOR_ALLTOALLW(SENDBUF, SENDCOUNTS, SDISPLS, SENDTYPES,
RECVBUF, RECVCOUNTS, RDISPLS, RECVTYPES, COMM, REQUEST, IERROR)
<type> SENDBUF(*), RECVBUF(*)
INTEGER SENDCOUNTS(*), SENDTYPES(*)
INTEGER RECVCOUNTS(*), RECVTYPES(*)
INTEGER(KIND=MPI_ADDRESS_KIND) SDISPLS(*), RDISPLS(*)
INTEGER COMM, REQUEST, IERROR
INPUT PARAMETERSsendbuf Starting address of send buffer. sendcounts Integer array, where entry i specifies the number of elements to send to neighbor i. sdispls Integer array, where entry i specifies the displacement (in bytes, offset from sendbuf) from which to send data to neighbor i. sendtypes Datatype array, where entry i specifies the datatype to use when sending data to neighbor i. recvcounts Integer array, where entry j specifies the number of elements to receive from neighbor j. rdispls Integer array, where entry j specifies the displacement (in bytes, offset from recvbuf) to which data from neighbor j should be written. recvtypes Datatype array, where entry j specifies the datatype to use when receiving data from neighbor j. comm Communicator over which data is to be exchanged.
OUTPUT PARAMETERSrecvbuf Address of receive buffer. request Request (handle, non-blocking only). IERROR Fortran only: Error status.
DESCRIPTIONMPI_Neighbor_alltoallw is a generalized collective operation in which all processes send data to and receive data from all neighbors. It adds flexibility to MPI_Neighbor_alltoallv by allowing the user to specify the datatype of individual data blocks (in addition to displacement and element count). Its operation can be thought of in the following way, where each process performs 2n (n being the number of neighbors in the topology of communicator comm) independent point-to-point communications. The neighbors and buffer layout are determined by the topology of comm. MPI_Cart_get(comm, maxdims, dims, periods, coords);
for (dim = 0, i = 0 ; dim < dims ; ++dim) {
MPI_Cart_shift(comm, dim, 1, &r0, &r1);
MPI_Isend(sendbuf + sdispls[i] * extent(sendtype),
sendcount, sendtypes[i], r0, ..., comm, ...);
MPI_Irecv(recvbuf + rdispls[i] * extent(recvtype),
recvcount, recvtypes[i], r0, ..., comm, ...);
++i;
MPI_Isend(sendbuf + sdispls[i] * extent(sendtype),
sendcount, sendtypes[i], r1, ..., comm, &req[i]);
MPI_Irecv(recvbuf + rdispls[i] * extent(recvtype),
recvcount, recvtypes[i], r1, ..., comm, ...);
++i;
}
MPI_Wait_all (...);
MPI_Comm_size(comm, &n);
for (i = 0, i < n; i++)
MPI_Send(sendbuf + sdispls[i], sendcounts[i],
sendtypes[i], i, ..., comm);
for (i = 0, i < n; i++)
MPI_Recv(recvbuf + rdispls[i], recvcounts[i],
recvtypes[i], i, ..., comm);Process j sends the k-th block of its local sendbuf to neighbor k, which places the data in the j-th block of its local recvbuf. When a pair of processes exchanges data, each may pass different element count and datatype arguments so long as the sender specifies the same amount of data to send (in bytes) as the receiver expects to receive. Note that process i may send a different amount of data to process j than it receives from process j. Also, a process may send entirely different amounts and types of data to different processes in the communicator.
NOTESThe MPI_IN_PLACE option for sendbuf is not meaningful for this operation The specification of counts, types, and displacements should not cause any location to be written more than once. All arguments on all processes are significant. The comm argument, in particular, must describe the same communicator on all processes. The offsets of sdispls and rdispls are measured in bytes. Compare this to MPI_Neighbor_alltoallv, where these offsets are measured in units of sendtype and recvtype, respectively.
ERRORSAlmost all MPI routines return an error value; C routines as the value of the function and Fortran routines in the last argument. Before the error value is returned, the current MPI error handler is called. By default, this error handler aborts the MPI job, except for I/O function errors. The error handler may be changed with MPI_Comm_set_errhandler; the predefined error handler MPI_ERRORS_RETURN may be used to cause error values to be returned. Note that MPI does not guarantee that an MPI program can continue past an error.
SEE ALSOMPI_Neighbor_alltoall
MPI_Neighbor_alltoallv
MPI_Cart_create
MPI_Graph_create
MPI_Dist_graph_create
0
Johanes Gumabo
Data Size : 22,168 byte
man-MPI_Ineighbor_alltoallw.3Build : 2024-12-05, 20:55 :
Visitor Screen : x
Visitor Counter ( page / site ) : 5 / 170,230
Visitor ID : :
Visitor IP : 3.147.27.154 :
Visitor Provider : AMAZON-02 :
Provider Position ( lat x lon ) : 39.962500 x -83.006100 : x
Provider Accuracy Radius ( km ) : 1000 :
Provider City : Columbus :
Provider Province : Ohio , : ,
Provider Country : United States :
Provider Continent : North America :
Visitor Recorder : Version :
Visitor Recorder : Library :
Online Linux Manual Page : Version : Online Linux Manual Page - Fedora.40 - march=x86-64 - mtune=generic - 24.12.05
Online Linux Manual Page : Library : lib_c - 24.10.03 - march=x86-64 - mtune=generic - Fedora.40
Online Linux Manual Page : Library : lib_m - 24.10.03 - march=x86-64 - mtune=generic - Fedora.40
Data Base : Version : Online Linux Manual Page Database - 24.04.13 - march=x86-64 - mtune=generic - fedora-38
Data Base : Library : lib_c - 23.02.07 - march=x86-64 - mtune=generic - fedora.36
Very long time ago, I have the best tutor, Wenzel Svojanovsky . If someone knows the email address of Wenzel Svojanovsky , please send an email to johanes_gumabo@yahoo.co.id .
If error, please print screen and send to johanes_gumabo@yahoo.co.id
Under development. Support me via PayPal.