NetworkManager_selinux.8 - Online Linux Manual Page

NetworkManager_selinux - Online Linux Manual PageSection : 8
Updated : 21-04-01
Source : NetworkManager
Note : SELinux Policy NetworkManager

NAMENetworkManager_selinux − Security Enhanced Linux Policy for the NetworkManager processes

DESCRIPTIONSecurity-Enhanced Linux secures the NetworkManager processes via flexible mandatory access control. The NetworkManager processes execute with the NetworkManager_t SELinux type. You can check if you have these processes running by executing the ps command with the −Z qualifier. For example: ps -eZ | grep NetworkManager_t

ENTRYPOINTSThe NetworkManager_t SELinux type can be entered via the NetworkManager_exec_t file type. The default entrypoint paths for the NetworkManager_t domain are the following: /usr/libexec/nm-dispatcher.*, /usr/bin/teamd, /usr/sbin/wicd, /usr/bin/NetworkManager, /usr/bin/wpa_supplicant, /usr/sbin/NetworkManager, /usr/sbin/wpa_supplicant, /usr/sbin/nm-system-settings, /usr/sbin/NetworkManagerDispatcher

PROCESS TYPESSELinux defines process types (domains) for each process running on the system You can see the context of a process using the −Z option to ps Policy governs the access confined processes have to files. SELinux NetworkManager policy is very flexible allowing users to setup their NetworkManager processes in as secure a method as possible. The following process types are defined for NetworkManager: NetworkManager_t, NetworkManager_ssh_tNote: semanage permissive -a NetworkManager_t can be used to make the process type NetworkManager_t permissive. SELinux does not deny access to permissive process types, but the AVC (SELinux denials) messages are still generated.

BOOLEANSSELinux policy is customizable based on least access required. NetworkManager policy is extremely flexible and has several booleans that allow you to manipulate the policy and run NetworkManager with the tightest access possible. If you want to deny all system processes and Linux users to use bluetooth wireless technology, you must turn on the deny_bluetooth boolean. Enabled by default. setsebool -P deny_bluetooth 1 If you want to deny any process from ptracing or debugging any other processes, you must turn on the deny_ptrace boolean. Enabled by default. setsebool -P deny_ptrace 1 If you want to allow all domains to execute in fips_mode, you must turn on the fips_mode boolean. Enabled by default. setsebool -P fips_mode 1 If you want to support ecryptfs home directories, you must turn on the use_ecryptfs_home_dirs boolean. Disabled by default. setsebool -P use_ecryptfs_home_dirs 1 If you want to support NFS home directories, you must turn on the use_nfs_home_dirs boolean. Disabled by default. setsebool -P use_nfs_home_dirs 1 If you want to support SAMBA home directories, you must turn on the use_samba_home_dirs boolean. Disabled by default. setsebool -P use_samba_home_dirs 1 If you want to allow xguest users to configure Network Manager and connect to apache ports, you must turn on the xguest_connect_network boolean. Enabled by default. setsebool -P xguest_connect_network 1

MANAGED FILESThe SELinux process type NetworkManager_t can manage files labeled with the following file types. The paths listed are the default paths for these file types. Note the processes UID still need to have DAC permissions.
NetworkManager_etc_rw_t /etc/NetworkManager/system-connections(/.*)?
/etc/NetworkManager/NetworkManager.conf

NetworkManager_var_lib_t /var/lib/wicd(/.*)?
/var/lib/NetworkManager(/.*)?
/etc/dhcp/wired-settings.conf
/etc/wicd/wired-settings.conf
/etc/dhcp/manager-settings.conf
/etc/wicd/manager-settings.conf
/etc/dhcp/wireless-settings.conf
/etc/wicd/wireless-settings.conf

NetworkManager_var_run_t /var/run/teamd(/.*)?
/var/run/nm-xl2tpd.conf.*
/var/run/nm-dhclient.*
/var/run/NetworkManager(/.*)?
/var/run/wpa_supplicant(/.*)?
/var/run/wicd.pid
/var/run/NetworkManager.pid
/var/run/nm-dns-dnsmasq.conf
/var/run/wpa_supplicant-global

cluster_conf_t /etc/cluster(/.*)?

cluster_var_lib_t /var/lib/pcsd(/.*)?
/var/lib/cluster(/.*)?
/var/lib/openais(/.*)?
/var/lib/pengine(/.*)?
/var/lib/corosync(/.*)?
/usr/lib/heartbeat(/.*)?
/var/lib/heartbeat(/.*)?
/var/lib/pacemaker(/.*)?

cluster_var_run_t /var/run/crm(/.*)?
/var/run/cman_.*
/var/run/rsctmp(/.*)?
/var/run/aisexec.*
/var/run/heartbeat(/.*)?
/var/run/pcsd-ruby.socket
/var/run/corosync-qnetd(/.*)?
/var/run/corosync-qdevice(/.*)?
/var/run/corosync.pid
/var/run/cpglockd.pid
/var/run/rgmanager.pid
/var/run/cluster/rgmanager.sk

dhcpc_state_t /var/lib/dhcp3?/dhclient.*
/var/lib/dhcpcd(/.*)?
/var/lib/dhclient(/.*)?
/var/lib/wifiroamd(/.*)?

named_cache_t /var/named/data(/.*)?
/var/lib/softhsm(/.*)?
/var/lib/unbound(/.*)?
/var/named/slaves(/.*)?
/var/named/dynamic(/.*)?
/var/named/chroot/var/tmp(/.*)?
/var/named/chroot/var/named/data(/.*)?
/var/named/chroot/var/named/slaves(/.*)?
/var/named/chroot/var/named/dynamic(/.*)?

pppd_var_run_t /var/run/(i)?ppp.*pid[^/]*
/var/run/ppp(/.*)?
/var/run/pppd[0-9]*.tdb

root_t /sysroot/ostree/deploy/.*-atomic/deploy(/.*)?
/
/initrd

security_t /selinux

sysfs_t /sys(/.*)?

systemd_passwd_var_run_t /var/run/systemd/ask-password(/.*)?
/var/run/systemd/ask-password-block(/.*)?

FILE CONTEXTSSELinux requires files to have an extended attribute to define the file type. You can see the context of a file using the −Z option to ls Policy governs the access confined processes have to these files. SELinux NetworkManager policy is very flexible allowing users to setup their NetworkManager processes in as secure a method as possible. EQUIVALENCE DIRECTORIES NetworkManager policy stores data with multiple different file context types under the /var/run/NetworkManager directory. If you would like to store the data in a different directory you can use the semanage command to create an equivalence mapping. If you wanted to store this data under the /srv directory you would execute the following command: semanage fcontext -a -e /var/run/NetworkManager /srv/NetworkManager
restorecon -R -v /srv/NetworkManager NetworkManager policy stores data with multiple different file context types under the /var/run/wpa_supplicant directory. If you would like to store the data in a different directory you can use the semanage command to create an equivalence mapping. If you wanted to store this data under the /srv directory you would execute the following command: semanage fcontext -a -e /var/run/wpa_supplicant /srv/wpa_supplicant
restorecon -R -v /srv/wpa_supplicant STANDARD FILE CONTEXT SELinux defines the file context types for the NetworkManager, if you wanted to store files with these types in a diffent paths, you need to execute the semanage command to sepecify alternate labeling and then use restorecon to put the labels on disk. semanage fcontext -a -t NetworkManager_var_run_t '/srv/myNetworkManager_content(/.*)?'
restorecon -R -v /srv/myNetworkManager_content Note: SELinux often uses regular expressions to specify labels that match multiple files. The following file types are defined for NetworkManager: NetworkManager_etc_rw_t- Set files with the NetworkManager_etc_rw_t type, if you want to treat the files as NetworkManager etc read/write content.
Paths: /etc/NetworkManager/system-connections(/.*)?, /etc/NetworkManager/NetworkManager.conf NetworkManager_etc_t- Set files with the NetworkManager_etc_t type, if you want to store NetworkManager files in the /etc directories. NetworkManager_exec_t- Set files with the NetworkManager_exec_t type, if you want to transition an executable to the NetworkManager_t domain.
Paths: /usr/libexec/nm-dispatcher.*, /usr/bin/teamd, /usr/sbin/wicd, /usr/bin/NetworkManager, /usr/bin/wpa_supplicant, /usr/sbin/NetworkManager, /usr/sbin/wpa_supplicant, /usr/sbin/nm-system-settings, /usr/sbin/NetworkManagerDispatcher NetworkManager_initrc_exec_t- Set files with the NetworkManager_initrc_exec_t type, if you want to transition an executable to the NetworkManager_initrc_t domain.
Paths: /etc/NetworkManager/dispatcher.d(/.*)?, /usr/lib/NetworkManager/dispatcher.d(/.*)?, /etc/rc.d/init.d/wicd NetworkManager_log_t- Set files with the NetworkManager_log_t type, if you want to treat the data as NetworkManager log data, usually stored under the /var/log directory.
Paths: /var/log/wicd.*, /var/log/wpa_supplicant.* NetworkManager_tmp_t- Set files with the NetworkManager_tmp_t type, if you want to store NetworkManager temporary files in the /tmp directories. NetworkManager_unit_file_t- Set files with the NetworkManager_unit_file_t type, if you want to treat the files as NetworkManager unit content.
Paths: /usr/lib/systemd/system/NetworkManager.*, /usr/lib/systemd/system/nm-cloud-setup.(service|timer) NetworkManager_var_lib_t- Set files with the NetworkManager_var_lib_t type, if you want to store the NetworkManager files under the /var/lib directory.
Paths: /var/lib/wicd(/.*)?, /var/lib/NetworkManager(/.*)?, /etc/dhcp/wired-settings.conf, /etc/wicd/wired-settings.conf, /etc/dhcp/manager-settings.conf, /etc/wicd/manager-settings.conf, /etc/dhcp/wireless-settings.conf, /etc/wicd/wireless-settings.conf NetworkManager_var_run_t- Set files with the NetworkManager_var_run_t type, if you want to store the NetworkManager files under the /run or /var/run directory.
Paths: /var/run/teamd(/.*)?, /var/run/nm-xl2tpd.conf.*, /var/run/nm-dhclient.*, /var/run/NetworkManager(/.*)?, /var/run/wpa_supplicant(/.*)?, /var/run/wicd.pid, /var/run/NetworkManager.pid, /var/run/nm-dns-dnsmasq.conf, /var/run/wpa_supplicant-global Note: File context can be temporarily modified with the chcon command. If you want to permanently change the file context you need to use the semanage fcontext command. This will modify the SELinux labeling database. You will need to use restorecon to apply the labels.

COMMANDSsemanage fcontext can also be used to manipulate default file context mappings. semanage permissive can also be used to manipulate whether or not a process type is permissive. semanage module can also be used to enable/disable/install/remove policy modules. semanage boolean can also be used to manipulate the booleans system-config-selinux is a GUI tool available to customize SELinux policy settings.

AUTHORThis manual page was auto-generated using sepolicy manpage".

Johanes Gumabo

Data Size : 31,360 byte
man-NetworkManager_selinux.8Build : 2024-12-05, 20:55 :
Visitor Screen : x
Visitor Counter ( page / site ) : 4 / 171,532
Visitor ID : :
Visitor IP : 3.142.135.24 :
Visitor Provider : AMAZON-02 :
Provider Position ( lat x lon ) : 39.962500 x -83.006100 : x
Provider Accuracy Radius ( km ) : 1000 :
Provider City : Columbus :
Provider Province : Ohio , : ,
Provider Country : United States :
Provider Continent : North America :
Visitor Recorder : Version :
Visitor Recorder : Library :
Online Linux Manual Page : Version : Online Linux Manual Page - Fedora.40 - march=x86-64 - mtune=generic - 24.12.05
Online Linux Manual Page : Library : lib_c - 24.10.03 - march=x86-64 - mtune=generic - Fedora.40
Online Linux Manual Page : Library : lib_m - 24.10.03 - march=x86-64 - mtune=generic - Fedora.40
Data Base : Version : Online Linux Manual Page Database - 24.04.13 - march=x86-64 - mtune=generic - fedora-38
Data Base : Library : lib_c - 23.02.07 - march=x86-64 - mtune=generic - fedora.36

Very long time ago, I have the best tutor, Wenzel Svojanovsky . If someone knows the email address of Wenzel Svojanovsky , please send an email to johanes_gumabo@yahoo.co.id .

If error, please print screen and send to johanes_gumabo@yahoo.co.id
Under development. Support me via PayPal.