Regexp::Common::number - Online Linux Manual PageSection : 3
Updated : 2022-01-21
Source : perl v5.34.0
Note : User Contributed Perl Documentation

NAMERegexp::Common::number −− provide regexes for numbers

SYNOPSIS​ use Regexp::Common qw /number/; ​ ​ while (<>) { ​ /^$RE{num}{int}$/ and print "Integer\n"; ​ /^$RE{num}{real}$/ and print "Real\n"; ​ /^$RE{num}{real}{−base => 16}$/ and print "Hexadecimal real\n"; ​ }

DESCRIPTIONPlease consult the manual of Regexp::Common for a general description of the works of this interface. Do not use this module directly, but load it via Regexp::Common.

$RE{num}{int}{−base}{−sep}{−group}{−places}{−sign}Returns a pattern that matches an integer. If −base => B is specified, the integer is in base B, with ​2 <= B <= 36. For bases larger than 10, upper case letters are used. The default base is 10. If −sep => P is specified, the pattern P is required as a grouping marker within the number. If this option is not given, no grouping marker is used. If −group => N is specified, digits between grouping markers must be grouped in sequences of exactly N digits. The default value of N is 3. If −group => N,M is specified, digits between grouping markers must be grouped in sequences of at least N digits, and at most M digits. This option is ignored unless the −sep option is used. If −places => N is specified, the integer recognized must be exactly N digits wide. If −places => N,M is specified, the integer must be at least N wide, and at most M characters. There is no default, which means that integers are unlimited in size. This option is ignored if the −sep option is used. If −sign => P is used, it's a pattern the leading sign has to match. This defaults to [−+]?, which means the number is optionally preceded by a minus or a plus. If you want to match unsigned integers, use $RE{num}{int}{−sign => ''}. For example: ​ $RE{num}{int} # match 1234567 ​ $RE{num}{int}{−sep=>','} # match 1,234,567 ​ $RE{num}{int}{−sep=>',?'} # match 1234567 or 1,234,567 ​ $RE{num}{int}{−sep=>'.'}{−group=>4} # match 1.2345.6789 Under −keep (see Regexp::Common): $1 captures the entire number $2 captures the optional sign of the number $3 captures the complete set of digits

$RE{num}{real}{−base}{−radix}{−places}{−sep}{−group}{−expon}Returns a pattern that matches a floating-point number. If −base=N is specified, the number is assumed to be in that base (with A..Z representing the digits for 11..36). By default, the base is 10. If −radix=P is specified, the pattern P is used as the radix point for the number (i.e. the decimal point in base 10). The default is qr/[.]/. If −places=N is specified, the number is assumed to have exactly ​N places after the radix point. If −places=M,N is specified, the number is assumed to have between ​M and N places after the radix point. By default, the number of places is unrestricted. If −sep=P specified, the pattern P is required as a grouping marker within the pre-radix section of the number. By default, no separator is allowed. If −group=N is specified, digits between grouping separators must be grouped in sequences of exactly N characters. The default value of ​N is 3. If −expon=P is specified, the pattern P is used as the exponential marker. The default value of P is qr/[Ee]/. If −sign=P is specified, the pattern P is used to match the leading sign (and the sign of the exponent). This defaults to [−+]?, means means that an optional plus or minus sign can be used. For example: ​ $RE{num}{real} # matches 123.456 or −0.1234567 ​ $RE{num}{real}{−places=>2} # matches 123.45 or −0.12 ​ $RE{num}{real}{−places=>'0,3'} # matches 123.456 or 0 or 9.8 ​ $RE{num}{real}{−sep=>'[,.]?'} # matches 123,456 or 123.456 ​ $RE{num}{real}{−base=>3'} # matches 121.102 Under −keep: $1 captures the entire match $2 captures the optional sign of the number $3 captures the complete mantissa $4 captures the whole number portion of the mantissa $5 captures the radix point $6 captures the fractional portion of the mantissa $7 captures the optional exponent marker $8 captures the entire exponent value $9 captures the optional sign of the exponent $10 captures the digits of the exponent

$RE{num}{dec}{−radix}{−places}{−sep}{−group}{−expon}A synonym for $RE{num}{real}{−base=>10}{...}

$RE{num}{oct}{−radix}{−places}{−sep}{−group}{−expon}A synonym for $RE{num}{real}{−base=>8}{...}

$RE{num}{bin}{−radix}{−places}{−sep}{−group}{−expon}A synonym for $RE{num}{real}{−base=>2}{...}

$RE{num}{hex}{−radix}{−places}{−sep}{−group}{−expon}A synonym for $RE{num}{real}{−base=>16}{...}

$RE{num}{decimal}{−base}{−radix}{−places}{−sep}{−group}The same as $RE{num}{real}, except that an exponent isn't allowed. Hence, this returns a pattern matching decimal numbers. If −base=N is specified, the number is assumed to be in that base (with A..Z representing the digits for 11..36). By default, the base is 10. If −radix=P is specified, the pattern P is used as the radix point for the number (i.e. the decimal point in base 10). The default is qr/[.]/. If −places=N is specified, the number is assumed to have exactly ​N places after the radix point. If −places=M,N is specified, the number is assumed to have between ​M and N places after the radix point. By default, the number of places is unrestricted. If −sep=P specified, the pattern P is required as a grouping marker within the pre-radix section of the number. By default, no separator is allowed. If −group=N is specified, digits between grouping separators must be grouped in sequences of exactly N characters. The default value of ​N is 3. For example: ​ $RE{num}{decimal} # matches 123.456 or −0.1234567 ​ $RE{num}{decimal}{−places=>2} # matches 123.45 or −0.12 ​ $RE{num}{decimal}{−places=>'0,3'} # matches 123.456 or 0 or 9.8 ​ $RE{num}{decimal}{−sep=>'[,.]?'} # matches 123,456 or 123.456 ​ $RE{num}{decimal}{−base=>3'} # matches 121.102 Under −keep: $1 captures the entire match $2 captures the optional sign of the number $3 captures the complete mantissa $4 captures the whole number portion of the mantissa $5 captures the radix point $6 captures the fractional portion of the mantissa

$RE{num}{square}Returns a pattern that matches a (decimal) square. Because Perl's arithmetic is lossy when using integers over about 53 bits, this pattern only recognizes numbers less than 9000000000000000, if one uses a Perl that is configured to use 64 bit integers. Otherwise, the limit is 2147483647. These restrictions were introduced in versions 2.116 and 2.117 of Regexp::Common. Regardless whether −keep was set, the matched number will be returned in $1.

$RE{num}{roman}Returns a pattern that matches an integer written in Roman numbers. Case doesn't matter. There is no unique way of writing Roman numerals, but we will not match anything. We require the Roman numerals to list the symbols in order (largest first). The symbols for thousand (M), hundred (C), ten (X), and one (I) can not be repeated more than four times. The symbols for five hundred (D), fifty (L), and five (V) may not appear more than once. A sequence of four repeated characters may also be written as a subtraction: by using the repeated character just once, and have it followed by the symbol which is 5 or 10 as large. So, four can be written as IIII, or as IV, and nine may be written as ​VIIII or IX. This corresponds to most modern uses of Roman numerals. The largest number which will be matched is 4999, or ​MMMMDCCCCLXXXXVIIII, or MMMMCMXCIX. Under −keep, the number will be captured in $1.

SEE ALSORegexp::Common for a general description of how to use this interface.

AUTHORDamian Conway (damian@conway.org)

MAINTENANCEThis package is maintained by Abigail (regexp−common@abigail.be).

BUGS AND IRRITATIONSBound to be plenty. For a start, there are many common regexes missing. Send them in to regexp−common@abigail.be.

LICENSE and COPYRIGHTThis software is Copyright (c) 2001 − 2017, Damian Conway and Abigail. This module is free software, and maybe used under any of the following licenses: ​ 1) The Perl Artistic License. See the file COPYRIGHT.AL. ​ 2) The Perl Artistic License 2.0. See the file COPYRIGHT.AL2. ​ 3) The BSD License. See the file COPYRIGHT.BSD. ​ 4) The MIT License. See the file COPYRIGHT.MIT.
0
Johanes Gumabo
Data Size   :   43,461 byte
man-Regexp::Common::number.3pmBuild   :   2024-12-05, 20:55   :  
Visitor Screen   :   x
Visitor Counter ( page / site )   :   4 / 175,776
Visitor ID   :     :  
Visitor IP   :   18.221.240.14   :  
Visitor Provider   :   AMAZON-02   :  
Provider Position ( lat x lon )   :   39.962500 x -83.006100   :   x
Provider Accuracy Radius ( km )   :   1000   :  
Provider City   :   Columbus   :  
Provider Province   :   Ohio ,   :   ,
Provider Country   :   United States   :  
Provider Continent   :   North America   :  
Visitor Recorder   :   Version   :  
Visitor Recorder   :   Library   :  
Online Linux Manual Page   :   Version   :   Online Linux Manual Page - Fedora.40 - march=x86-64 - mtune=generic - 24.12.05
Online Linux Manual Page   :   Library   :   lib_c - 24.10.03 - march=x86-64 - mtune=generic - Fedora.40
Online Linux Manual Page   :   Library   :   lib_m - 24.10.03 - march=x86-64 - mtune=generic - Fedora.40
Data Base   :   Version   :   Online Linux Manual Page Database - 24.04.13 - march=x86-64 - mtune=generic - fedora-38
Data Base   :   Library   :   lib_c - 23.02.07 - march=x86-64 - mtune=generic - fedora.36

Very long time ago, I have the best tutor, Wenzel Svojanovsky . If someone knows the email address of Wenzel Svojanovsky , please send an email to johanes_gumabo@yahoo.co.id .
If error, please print screen and send to johanes_gumabo@yahoo.co.id
Under development. Support me via PayPal.

ERROR : Need New Coding :         (parse_manual_page_|249|Regexp::Common::number.3pm|36/37|el══─{─══.|.el══─{─══. ds -- \|\(em\| )         (htmlprn|149|Regexp::Common::number.3pm|36/37|.el══─{─══. ds --  —  |.el══─{─══. ds -- \|\(em\| )         (parse_manual_page_|249|Regexp::Common::number.3pm|43|br══─}─══|'br══─}─══ )         (htmlprn|149|Regexp::Common::number.3pm|43|'br══─}─══ |'br══─}─══ )