SSL_CTX_SET0_CA_LIST - Online Linux Manual PageSection : 3ossl
Updated : 2022-03-15
Source : 3.0.2
Note : OpenSSL

NAMESSL_CTX_set_client_CA_list, SSL_set_client_CA_list, SSL_get_client_CA_list, SSL_CTX_get_client_CA_list, SSL_CTX_add_client_CA, SSL_add_client_CA, SSL_set0_CA_list, SSL_CTX_set0_CA_list, SSL_get0_CA_list, SSL_CTX_get0_CA_list, SSL_add1_to_CA_list, SSL_CTX_add1_to_CA_list, SSL_get0_peer_CA_list ​− get or set CA list

SYNOPSIS​ #include <openssl/ssl.h> ​ ​ void SSL_CTX_set_client_CA_list(SSL_CTX *ctx, STACK_OF(X509_NAME) *list); ​ void SSL_set_client_CA_list(SSL *s, STACK_OF(X509_NAME) *list); ​ STACK_OF(X509_NAME) *SSL_get_client_CA_list(const SSL *s); ​ STACK_OF(X509_NAME) *SSL_CTX_get_client_CA_list(const SSL_CTX *ctx); ​ int SSL_CTX_add_client_CA(SSL_CTX *ctx, X509 *cacert); ​ int SSL_add_client_CA(SSL *ssl, X509 *cacert); ​ ​ void SSL_CTX_set0_CA_list(SSL_CTX *ctx, STACK_OF(X509_NAME) *name_list); ​ void SSL_set0_CA_list(SSL *s, STACK_OF(X509_NAME) *name_list); ​ const STACK_OF(X509_NAME) *SSL_CTX_get0_CA_list(const SSL_CTX *ctx); ​ const STACK_OF(X509_NAME) *SSL_get0_CA_list(const SSL *s); ​ int SSL_CTX_add1_to_CA_list(SSL_CTX *ctx, const X509 *x); ​ int SSL_add1_to_CA_list(SSL *ssl, const X509 *x); ​ ​ const STACK_OF(X509_NAME) *SSL_get0_peer_CA_list(const SSL *s);

DESCRIPTIONThe functions described here set and manage the list of CA names that are sent between two communicating peers. For TLS versions 1.2 and earlier the list of CA names is only sent from the server to the client when requesting a client certificate. So any list of CA names set is never sent from client to server and the list of CA names retrieved by SSL_get0_peer_CA_list() is always NULL. For TLS 1.3 the list of CA names is sent using the certificate_authorities extension and may be sent by a client (in the ClientHello message) or by a server (when requesting a certificate). In most cases it is not necessary to set CA names on the client side. The list of CA names that are acceptable to the client will be sent in plaintext to the server. This has privacy implications and may also have performance implications if the list is large. This optional capability was introduced as part of TLSv1.3 and therefore setting CA names on the client side will have no impact if that protocol version has been disabled. Most servers do not need this and so this should be avoided unless required. The client CA list functions below only have an effect when called on the server side. SSL_CTX_set_client_CA_list() sets the list of CAs sent to the client when requesting a client certificate for ctx. Ownership of list is transferred to ctx and it should not be freed by the caller. SSL_set_client_CA_list() sets the list of CAs sent to the client when requesting a client certificate for the chosen ssl, overriding the setting valid for ssl's SSL_CTX object. Ownership of list is transferred to s and it should not be freed by the caller. SSL_CTX_get_client_CA_list() returns the list of client CAs explicitly set for ​ctx using SSL_CTX_set_client_CA_list(). The returned list should not be freed by the caller. SSL_get_client_CA_list() returns the list of client CAs explicitly set for ssl using SSL_set_client_CA_list() or ssl's SSL_CTX object with ​SSL_CTX_set_client_CA_list(), when in server mode. In client mode, SSL_get_client_CA_list returns the list of client CAs sent from the server, if any. The returned list should not be freed by the caller. SSL_CTX_add_client_CA() adds the CA name extracted from cacert to the list of CAs sent to the client when requesting a client certificate for ​ctx. SSL_add_client_CA() adds the CA name extracted from cacert to the list of CAs sent to the client when requesting a client certificate for the chosen ssl, overriding the setting valid for ssl's SSL_CTX object. SSL_get0_peer_CA_list() retrieves the list of CA names (if any) the peer has sent. This can be called on either the server or the client side. The returned list should not be freed by the caller. The generic CA list functions below are very similar to the client CA list functions except that they have an effect on both the server and client sides. The lists of CA names managed are separate − so you cannot (for example) set CA names using the client CA list functions and then get them using the ​generic CA list functions. Where a mix of the two types of functions has been used on the server side then the client CA list functions take precedence. Typically, on the server side, the client CA list functions should be used in preference. As noted above in most cases it is not necessary to set CA names on the client side. SSL_CTX_set0_CA_list() sets the list of CAs to be sent to the peer to ​name_list. Ownership of name_list is transferred to ctx and it should not be freed by the caller. SSL_set0_CA_list() sets the list of CAs to be sent to the peer to name_list overriding any list set in the parent SSL_CTX of s. Ownership of ​name_list is transferred to s and it should not be freed by the caller. SSL_CTX_get0_CA_list() retrieves any previously set list of CAs set for ​ctx. The returned list should not be freed by the caller. SSL_get0_CA_list() retrieves any previously set list of CAs set for ​s or if none are set the list from the parent SSL_CTX is retrieved. The returned list should not be freed by the caller. SSL_CTX_add1_to_CA_list() appends the CA subject name extracted from x to the list of CAs sent to peer for ctx. SSL_add1_to_CA_list() appends the CA subject name extracted from x to the list of CAs sent to the peer for s, overriding the setting in the parent ​SSL_CTX.

NOTESWhen a TLS/SSL server requests a client certificate (see ​SSL_CTX_set_verify(3)), it sends a list of CAs, for which it will accept certificates, to the client. This list must explicitly be set using SSL_CTX_set_client_CA_list() or ​SSL_CTX_set0_CA_list() for ctx and SSL_set_client_CA_list() or ​SSL_set0_CA_list() for the specific ssl. The list specified overrides the previous setting. The CAs listed do not become trusted (list only contains the names, not the complete certificates); use ​SSL_CTX_load_verify_locations(3) to additionally load them for verification. If the list of acceptable CAs is compiled in a file, the ​SSL_load_client_CA_file(3) function can be used to help to import the necessary data. SSL_CTX_add_client_CA(), SSL_CTX_add1_to_CA_list(), SSL_add_client_CA() and ​SSL_add1_to_CA_list() can be used to add additional items the list of CAs. If no list was specified before using SSL_CTX_set_client_CA_list(), ​SSL_CTX_set0_CA_list(), SSL_set_client_CA_list() or SSL_set0_CA_list(), a new CA list for ctx or ssl (as appropriate) is opened.

RETURN VALUESSSL_CTX_set_client_CA_list(), SSL_set_client_CA_list(), ​SSL_CTX_set_client_CA_list(), SSL_set_client_CA_list(), SSL_CTX_set0_CA_list() and SSL_set0_CA_list() do not return a value. SSL_CTX_get_client_CA_list(), SSL_get_client_CA_list(), SSL_CTX_get0_CA_list() and SSL_get0_CA_list() return a stack of CA names or NULL is no CA names are set. SSL_CTX_add_client_CA(),SSL_add_client_CA(), SSL_CTX_add1_to_CA_list() and ​SSL_add1_to_CA_list() return 1 for success and 0 for failure. SSL_get0_peer_CA_list() returns a stack of CA names sent by the peer or ​NULL or an empty stack if no list was sent.

EXAMPLESScan all certificates in CAfile and list them as acceptable CAs: ​ SSL_CTX_set_client_CA_list(ctx, SSL_load_client_CA_file(CAfile));

SEE ALSOssl(7), ​SSL_load_client_CA_file(3), ​SSL_CTX_load_verify_locations(3)

COPYRIGHTCopyright 2000−2018 The OpenSSL Project Authors. All Rights Reserved. Licensed under the Apache License 2.0 (the License). You may not use this file except in compliance with the License. You can obtain a copy in the file LICENSE in the source distribution or at <https://www.openssl.org/source/license.html>.
0
Johanes Gumabo
Data Size   :   27,825 byte
man-SSL_CTX_add_client_CA.3osslBuild   :   2024-12-05, 20:55   :  
Visitor Screen   :   x
Visitor Counter ( page / site )   :   3 / 169,696
Visitor ID   :     :  
Visitor IP   :   18.116.28.79   :  
Visitor Provider   :   AMAZON-02   :  
Provider Position ( lat x lon )   :   39.962500 x -83.006100   :   x
Provider Accuracy Radius ( km )   :   1000   :  
Provider City   :   Columbus   :  
Provider Province   :   Ohio ,   :   ,
Provider Country   :   United States   :  
Provider Continent   :   North America   :  
Visitor Recorder   :   Version   :  
Visitor Recorder   :   Library   :  
Online Linux Manual Page   :   Version   :   Online Linux Manual Page - Fedora.40 - march=x86-64 - mtune=generic - 24.12.05
Online Linux Manual Page   :   Library   :   lib_c - 24.10.03 - march=x86-64 - mtune=generic - Fedora.40
Online Linux Manual Page   :   Library   :   lib_m - 24.10.03 - march=x86-64 - mtune=generic - Fedora.40
Data Base   :   Version   :   Online Linux Manual Page Database - 24.04.13 - march=x86-64 - mtune=generic - fedora-38
Data Base   :   Library   :   lib_c - 23.02.07 - march=x86-64 - mtune=generic - fedora.36

Very long time ago, I have the best tutor, Wenzel Svojanovsky . If someone knows the email address of Wenzel Svojanovsky , please send an email to johanes_gumabo@yahoo.co.id .
If error, please print screen and send to johanes_gumabo@yahoo.co.id
Under development. Support me via PayPal.

ERROR : Need New Coding :         (parse_manual_page_|249|S___SL_add1_to_CA_list.3ossl|36/37|el══─{─══.|.el══─{─══. ds -- \|\(em\| )         (htmlprn|149|S___SL_add1_to_CA_list.3ossl|36/37|.el══─{─══. ds --  —  |.el══─{─══. ds -- \|\(em\| )         (parse_manual_page_|249|S___SL_add1_to_CA_list.3ossl|43|br══─}─══|'br══─}─══ )         (htmlprn|149|S___SL_add1_to_CA_list.3ossl|43|'br══─}─══ |'br══─}─══ )