ARCHIVE_WRITE - Online Linux Manual PageSection : 3
Updated : February 2, 2012

---

NAME archive_write —functions for creating archives

---

LIBRARYStreaming Archive Library (libarchive, -larchive)

---

SYNOPSIS #include <archive.h>

---

DESCRIPTIONThese functions provide a complete API for creating streaming archive files. The general process is to first create the struct archive object, set any desired options, initialize the archive, append entries, then close the archive and release all resources.

---

Create archive objectSee archive_write_new(3). To write an archive, you must first obtain an initialized struct archive object from archive_write_new().

---

Enable filters and formats, configure block size and paddingSee archive_write_filter(3), archive_write_format(3) and archive_write_blocksize(3). You can then modify this object for the desired operations with the various archive_write_set_XXX() functions. In particular, you will need to invoke appropriate archive_write_add_XXX() and archive_write_set_XXX() functions to enable the corresponding compression and format support.

---

Set optionsSee archive_write_set_options(3).

---

Open archiveSee archive_write_open(3). Once you have prepared the struct archive object, you call archive_write_open() to actually open the archive and prepare it for writing. There are several variants of this function; the most basic expects you to provide pointers to several functions that can provide blocks of bytes from the archive. There are convenience forms that allow you to specify a filename, file descriptor, FILE * object, or a block of memory from which to write the archive data.

---

Produce archiveSee archive_write_header(3) and archive_write_data(3). Individual archive entries are written in a three-step process: You first initialize a struct archive_entry structure with information about the new entry. At a minimum, you should set the pathname of the entry and provide a struct stat with a valid st_mode field, which specifies the type of object and st_size field, which specifies the size of the data portion of the object.

---

Release resourcesSee archive_write_free(3). After all entries have been written, use the archive_write_free() function to release all resources.

---

EXAMPLESThe following sketch illustrates basic usage of the library. In this example, the callback functions are simply wrappers around the standard open(2), write(2), and close(2) system calls. #ifdef __linux__ #define_FILE_OFFSET_BITS 64 #endif #include <sys/stat.h> #include <archive.h> #include <archive_entry.h> #include <fcntl.h> #include <stdlib.h> #include <unistd.h> struct mydata {
  const char *name;
  int fd; }; int myopen(struct archive *a, void *client_data) {
  struct mydata *mydata = client_data;
  mydata->fd = open(mydata->name, O_WRONLY | O_CREAT, 0644);
  if (mydata->fd >= 0)
    return (ARCHIVE_OK);
  else
    return (ARCHIVE_FATAL); } la_ssize_t mywrite(struct archive *a, void *client_data, const void *buff, size_t n) {
  struct mydata *mydata = client_data;
  return (write(mydata->fd, buff, n)); } int myclose(struct archive *a, void *client_data) {
  struct mydata *mydata = client_data;
  if (mydata->fd > 0)
    close(mydata->fd);
  return (0); } void write_archive(const char *outname, const char **filename) {
  struct mydata *mydata = malloc(sizeof(struct mydata));
  struct archive *a;
  struct archive_entry *entry;
  struct stat st;
  char buff[8192];
  int len;
  int fd;
  a = archive_write_new();
  mydata->name = outname;
  /* Set archive format and filter according to output file extension.
   * If it fails, set default format. Platform depended function.
   * See supported formats in archive_write_set_format_filter_by_ext.c */
  if (archive_write_set_format_filter_by_ext(a, outname) != ARCHIVE_OK) {
    archive_write_add_filter_gzip(a);
    archive_write_set_format_ustar(a);
  }
  archive_write_open(a, mydata, myopen, mywrite, myclose);
  while (*filename) {
    stat(*filename, &st);
    entry = archive_entry_new();
    archive_entry_copy_stat(entry, &st);
    archive_entry_set_pathname(entry, *filename);
    archive_write_header(a, entry);
    if ((fd = open(*filename, O_RDONLY)) != -1) {
      len = read(fd, buff, sizeof(buff));
      while (len > 0) {
        archive_write_data(a, buff, len);
        len = read(fd, buff, sizeof(buff));
      }
      close(fd);
    }
    archive_entry_free(entry);
    filename++;
  }
  archive_write_free(a); } int main(int argc, const char **argv) {
  const char *outname;
  argv++;
  outname = *argv++;
  write_archive(outname, argv);
  return 0; }

---

SEE ALSOtar(1), archive_write_set_options(3), libarchive(3), cpio(5), mtree(5), tar(5)

---

HISTORYThe libarchive library first appeared in FreeBSD 5.3.

---

AUTHORS -nosplit The libarchive library was written by Tim Kientzle ⟨kientzle@acm.org⟩.

---

BUGSThere are many peculiar bugs in historic tar implementations that may cause certain programs to reject archives written by this library. For example, several historic implementations calculated header checksums incorrectly and will thus reject valid archives; GNU tar does not fully support pax interchange format; some old tar implementations required specific field terminations. The default pax interchange format eliminates most of the historic tar limitations and provides a generic key/value attribute facility for vendor-defined extensions. One oversight in POSIX is the failure to provide a standard attribute for large device numbers. This library uses ‟SCHILY.devminor” and ‟SCHILY.devmajor” for device numbers that exceed the range supported by the backwards-compatible ustar header. These keys are compatible with Joerg Schilling's star archiver. Other implementations may not recognize these keys and will thus be unable to correctly restore device nodes with large device numbers from archives created by this library. 0

---

Johanes Gumabo

---

Data Size   :   18,952 byte
man-archive_write.3Build   :   2024-12-05, 20:55   :  
Visitor Screen   :   x
Visitor Counter ( page / site )   :   3 / 185,006
Visitor ID   :     :  
Visitor IP   :   3.137.219.221   :  
Visitor Provider   :   AMAZON-02   :  
Provider Position ( lat x lon )   :   39.962500 x -83.006100   :   x
Provider Accuracy Radius ( km )   :   1000   :  
Provider City   :   Columbus   :  
Provider Province   :   Ohio ,   :   ,
Provider Country   :   United States   :  
Provider Continent   :   North America   :  
Visitor Recorder   :   Version   :  
Visitor Recorder   :   Library   :  
Online Linux Manual Page   :   Version   :   Online Linux Manual Page - Fedora.40 - march=x86-64 - mtune=generic - 24.12.05
Online Linux Manual Page   :   Library   :   lib_c - 24.10.03 - march=x86-64 - mtune=generic - Fedora.40
Online Linux Manual Page   :   Library   :   lib_m - 24.10.03 - march=x86-64 - mtune=generic - Fedora.40
Data Base   :   Version   :   Online Linux Manual Page Database - 24.04.13 - march=x86-64 - mtune=generic - fedora-38
Data Base   :   Library   :   lib_c - 23.02.07 - march=x86-64 - mtune=generic - fedora.36

---

Very long time ago, I have the best tutor, Wenzel Svojanovsky . If someone knows the email address of Wenzel Svojanovsky , please send an email to johanes_gumabo@yahoo.co.id .

---

If error, please print screen and send to johanes_gumabo@yahoo.co.id
Under development. Support me via PayPal.

---