cmakecommands - Online Linux Manual PageSection : 1
Updated : October 15, 2014
Source : cmake 2.8.12.2

NAMEcmakecommands − Reference of available CMake commands.

COMMANDSadd_compile_options  Adds options to the compilation of source files. add_compile_options(<option> ...)Adds options to the compiler command line for sources in the current directory and below. This command can be used to add any options, but alternative commands exist to add preprocessor definitions or include directories. See documentation of the directory and target COMPILE_OPTIONS properties for details. Arguments to add_compile_options may use "generator expressions" with the syntax "$<...>". Generator expressions are evaluated during build system generation to produce information specific to each build configuration. Valid expressions are: $<0:...> = empty string (ignores "...") $<1:...> = content of "..." $<CONFIG:cfg> = '1' if config is "cfg", else '0' $<CONFIGURATION> = configuration name $<BOOL:...> = '1' if the '...' is true, else '0' $<STREQUAL:a,b> = '1' if a is STREQUAL b, else '0' $<ANGLE−R> = A literal '>'. Used to compare strings which contain a '>' for example. $<COMMA> = A literal ','. Used to compare strings which contain a ',' for example. $<SEMICOLON> = A literal ';'. Used to prevent list expansion on an argument with ';'. $<JOIN:list,...> = joins the list with the content of "..." $<TARGET_NAME:...> = Marks ... as being the name of a target. This is required if exporting targets to multiple dependent export sets. The '...' must be a literal name of a target− it may not contain generator expressions. $<INSTALL_INTERFACE:...> = content of "..." when the property is exported using install(EXPORT), and empty otherwise. $<BUILD_INTERFACE:...> = content of "..." when the property is exported using export(), or when the target is used by another target in the same buildsystem. Expands to the empty string otherwise. $<C_COMPILER_ID> = The CMake−id of the C compiler used. $<C_COMPILER_ID:comp> = '1' if the CMake−id of the C compiler matches comp, otherwise '0'. $<CXX_COMPILER_ID> = The CMake−id of the CXX compiler used. $<CXX_COMPILER_ID:comp> = '1' if the CMake−id of the CXX compiler matches comp, otherwise '0'. $<VERSION_GREATER:v1,v2> = '1' if v1 is a version greater than v2, else '0'. $<VERSION_LESS:v1,v2> = '1' if v1 is a version less than v2, else '0'. $<VERSION_EQUAL:v1,v2> = '1' if v1 is the same version as v2, else '0'. $<C_COMPILER_VERSION> = The version of the C compiler used. $<C_COMPILER_VERSION:ver> = '1' if the version of the C compiler matches ver, otherwise '0'. $<CXX_COMPILER_VERSION> = The version of the CXX compiler used. $<CXX_COMPILER_VERSION:ver> = '1' if the version of the CXX compiler matches ver, otherwise '0'. $<TARGET_FILE:tgt> = main file (.exe, .so.1.2, .a) $<TARGET_LINKER_FILE:tgt> = file used to link (.a, .lib, .so) $<TARGET_SONAME_FILE:tgt> = file with soname (.so.3)where "tgt" is the name of a target. Target file expressions produce a full path, but _DIR and _NAME versions can produce the directory and file name components: $<TARGET_FILE_DIR:tgt>/$<TARGET_FILE_NAME:tgt> $<TARGET_LINKER_FILE_DIR:tgt>/$<TARGET_LINKER_FILE_NAME:tgt> $<TARGET_SONAME_FILE_DIR:tgt>/$<TARGET_SONAME_FILE_NAME:tgt> $<TARGET_PROPERTY:tgt,prop> = The value of the property prop on the target tgt.Note that tgt is not added as a dependency of the target this expression is evaluated on. $<TARGET_POLICY:pol> = '1' if the policy was NEW when the 'head' target was created, else '0'. If the policy was not set, the warning message for the policy will be emitted. This generator expression only works for a subset of policies. $<INSTALL_PREFIX> = Content of the install prefix when the target is exported via INSTALL(EXPORT) and empty otherwise.Boolean expressions: $<AND:?[,?]...> = '1' if all '?' are '1', else '0' $<OR:?[,?]...> = '0' if all '?' are '0', else '1' $<NOT:?> = '0' if '?' is '1', else '1'where '?' is always either '0' or '1'. Expressions with an implicit 'this' target: $<TARGET_PROPERTY:prop> = The value of the property prop on the target on which the generator expression is evaluated.add_custom_command  Add a custom build rule to the generated build system. There are two main signatures for add_custom_command The first signature is for adding a custom command to produce an output. add_custom_command(OUTPUT output1 [output2 ...] COMMAND command1 [ARGS] [args1...] [COMMAND command2 [ARGS] [args2...] ...] [MAIN_DEPENDENCY depend] [DEPENDS [depends...]] [IMPLICIT_DEPENDS <lang1> depend1 [<lang2> depend2] ...] [WORKING_DIRECTORY dir] [COMMENT comment] [VERBATIM] [APPEND])This defines a command to generate specified OUTPUT file(s). A target created in the same directory (CMakeLists.txt file) that specifies any output of the custom command as a source file is given a rule to generate the file using the command at build time. Do not list the output in more than one independent target that may build in parallel or the two instances of the rule may conflict (instead use add_custom_target to drive the command and make the other targets depend on that one). If an output name is a relative path it will be interpreted relative to the build tree directory corresponding to the current source directory. Note that MAIN_DEPENDENCY is completely optional and is used as a suggestion to visual studio about where to hang the custom command. In makefile terms this creates a new target in the following form: OUTPUT: MAIN_DEPENDENCY DEPENDS COMMANDIf more than one command is specified they will be executed in order. The optional ARGS argument is for backward compatibility and will be ignored. The second signature adds a custom command to a target such as a library or executable. This is useful for performing an operation before or after building the target. The command becomes part of the target and will only execute when the target itself is built. If the target is already built, the command will not execute. add_custom_command(TARGET target PRE_BUILD | PRE_LINK | POST_BUILD COMMAND command1 [ARGS] [args1...] [COMMAND command2 [ARGS] [args2...] ...] [WORKING_DIRECTORY dir] [COMMENT comment] [VERBATIM])This defines a new command that will be associated with building the specified target. When the command will happen is determined by which of the following is specified: PRE_BUILD − run before all other dependencies PRE_LINK − run after other dependencies POST_BUILD − run after the target has been builtNote that the PRE_BUILD option is only supported on Visual Studio 7 or later. For all other generators PRE_BUILD will be treated as PRE_LINK. If WORKING_DIRECTORY is specified the command will be executed in the directory given. If it is a relative path it will be interpreted relative to the build tree directory corresponding to the current source directory. If COMMENT is set, the value will be displayed as a message before the commands are executed at build time. If APPEND is specified the COMMAND and DEPENDS option values are appended to the custom command for the first output specified. There must have already been a previous call to this command with the same output. The COMMENT, WORKING_DIRECTORY, and MAIN_DEPENDENCY options are currently ignored when APPEND is given, but may be used in the future. If VERBATIM is given then all arguments to the commands will be escaped properly for the build tool so that the invoked command receives each argument unchanged. Note that one level of escapes is still used by the CMake language processor before add_custom_command even sees the arguments. Use of VERBATIM is recommended as it enables correct behavior. When VERBATIM is not given the behavior is platform specific because there is no protection of tool−specific special characters. If the output of the custom command is not actually created as a file on disk it should be marked as SYMBOLIC with SET_SOURCE_FILES_PROPERTIES. The IMPLICIT_DEPENDS option requests scanning of implicit dependencies of an input file. The language given specifies the programming language whose corresponding dependency scanner should be used. Currently only C and CXX language scanners are supported. The language has to be specified for every file in the IMPLICIT_DEPENDS list. Dependencies discovered from the scanning are added to those of the custom command at build time. Note that the IMPLICIT_DEPENDS option is currently supported only for Makefile generators and will be ignored by other generators. If COMMAND specifies an executable target (created by ADD_EXECUTABLE) it will automatically be replaced by the location of the executable created at build time. Additionally a target−level dependency will be added so that the executable target will be built before any target using this custom command. However this does NOT add a file−level dependency that would cause the custom command to re−run whenever the executable is recompiled. Arguments to COMMAND may use "generator expressions" with the syntax "$<...>". Generator expressions are evaluated during build system generation to produce information specific to each build configuration. Valid expressions are: $<0:...> = empty string (ignores "...") $<1:...> = content of "..." $<CONFIG:cfg> = '1' if config is "cfg", else '0' $<CONFIGURATION> = configuration name $<BOOL:...> = '1' if the '...' is true, else '0' $<STREQUAL:a,b> = '1' if a is STREQUAL b, else '0' $<ANGLE−R> = A literal '>'. Used to compare strings which contain a '>' for example. $<COMMA> = A literal ','. Used to compare strings which contain a ',' for example. $<SEMICOLON> = A literal ';'. Used to prevent list expansion on an argument with ';'. $<JOIN:list,...> = joins the list with the content of "..." $<TARGET_NAME:...> = Marks ... as being the name of a target. This is required if exporting targets to multiple dependent export sets. The '...' must be a literal name of a target− it may not contain generator expressions. $<INSTALL_INTERFACE:...> = content of "..." when the property is exported using install(EXPORT), and empty otherwise. $<BUILD_INTERFACE:...> = content of "..." when the property is exported using export(), or when the target is used by another target in the same buildsystem. Expands to the empty string otherwise. $<C_COMPILER_ID> = The CMake−id of the C compiler used. $<C_COMPILER_ID:comp> = '1' if the CMake−id of the C compiler matches comp, otherwise '0'. $<CXX_COMPILER_ID> = The CMake−id of the CXX compiler used. $<CXX_COMPILER_ID:comp> = '1' if the CMake−id of the CXX compiler matches comp, otherwise '0'. $<VERSION_GREATER:v1,v2> = '1' if v1 is a version greater than v2, else '0'. $<VERSION_LESS:v1,v2> = '1' if v1 is a version less than v2, else '0'. $<VERSION_EQUAL:v1,v2> = '1' if v1 is the same version as v2, else '0'. $<C_COMPILER_VERSION> = The version of the C compiler used. $<C_COMPILER_VERSION:ver> = '1' if the version of the C compiler matches ver, otherwise '0'. $<CXX_COMPILER_VERSION> = The version of the CXX compiler used. $<CXX_COMPILER_VERSION:ver> = '1' if the version of the CXX compiler matches ver, otherwise '0'. $<TARGET_FILE:tgt> = main file (.exe, .so.1.2, .a) $<TARGET_LINKER_FILE:tgt> = file used to link (.a, .lib, .so) $<TARGET_SONAME_FILE:tgt> = file with soname (.so.3)where "tgt" is the name of a target. Target file expressions produce a full path, but _DIR and _NAME versions can produce the directory and file name components: $<TARGET_FILE_DIR:tgt>/$<TARGET_FILE_NAME:tgt> $<TARGET_LINKER_FILE_DIR:tgt>/$<TARGET_LINKER_FILE_NAME:tgt> $<TARGET_SONAME_FILE_DIR:tgt>/$<TARGET_SONAME_FILE_NAME:tgt> $<TARGET_PROPERTY:tgt,prop> = The value of the property prop on the target tgt.Note that tgt is not added as a dependency of the target this expression is evaluated on. $<TARGET_POLICY:pol> = '1' if the policy was NEW when the 'head' target was created, else '0'. If the policy was not set, the warning message for the policy will be emitted. This generator expression only works for a subset of policies. $<INSTALL_PREFIX> = Content of the install prefix when the target is exported via INSTALL(EXPORT) and empty otherwise.Boolean expressions: $<AND:?[,?]...> = '1' if all '?' are '1', else '0' $<OR:?[,?]...> = '0' if all '?' are '0', else '1' $<NOT:?> = '0' if '?' is '1', else '1'where '?' is always either '0' or '1'. Expressions with an implicit 'this' target: $<TARGET_PROPERTY:prop> = The value of the property prop on the target on which the generator expression is evaluated.References to target names in generator expressions imply target−level dependencies, but NOT file−level dependencies. List target names with the DEPENDS option to add file dependencies. The DEPENDS option specifies files on which the command depends. If any dependency is an OUTPUT of another custom command in the same directory (CMakeLists.txt file) CMake automatically brings the other custom command into the target in which this command is built. If DEPENDS is not specified the command will run whenever the OUTPUT is missing; if the command does not actually create the OUTPUT then the rule will always run. If DEPENDS specifies any target (created by an ADD_* command) a target−level dependency is created to make sure the target is built before any target using this custom command. Additionally, if the target is an executable or library a file−level dependency is created to cause the custom command to re−run whenever the target is recompiled. add_custom_target  Add a target with no output so it will always be built. add_custom_target(Name [ALL] [command1 [args1...]] [COMMAND command2 [args2...] ...] [DEPENDS depend depend depend ... ] [WORKING_DIRECTORY dir] [COMMENT comment] [VERBATIM] [SOURCES src1 [src2...]])Adds a target with the given name that executes the given commands. The target has no output file and is ALWAYS CONSIDERED OUT OF DATE even if the commands try to create a file with the name of the target. Use ADD_CUSTOM_COMMAND to generate a file with dependencies. By default nothing depends on the custom target. Use ADD_DEPENDENCIES to add dependencies to or from other targets. If the ALL option is specified it indicates that this target should be added to the default build target so that it will be run every time (the command cannot be called ALL). The command and arguments are optional and if not specified an empty target will be created. If WORKING_DIRECTORY is set, then the command will be run in that directory. If it is a relative path it will be interpreted relative to the build tree directory corresponding to the current source directory. If COMMENT is set, the value will be displayed as a message before the commands are executed at build time. Dependencies listed with the DEPENDS argument may reference files and outputs of custom commands created with add_custom_command() in the same directory (CMakeLists.txt file). If VERBATIM is given then all arguments to the commands will be escaped properly for the build tool so that the invoked command receives each argument unchanged. Note that one level of escapes is still used by the CMake language processor before add_custom_target even sees the arguments. Use of VERBATIM is recommended as it enables correct behavior. When VERBATIM is not given the behavior is platform specific because there is no protection of tool−specific special characters. The SOURCES option specifies additional source files to be included in the custom target. Specified source files will be added to IDE project files for convenience in editing even if they have not build rules. add_definitions  Adds −D define flags to the compilation of source files. add_definitions(−DFOO −DBAR ...)Adds flags to the compiler command line for sources in the current directory and below. This command can be used to add any flags, but it was originally intended to add preprocessor definitions. Flags beginning in −D or /D that look like preprocessor definitions are automatically added to the COMPILE_DEFINITIONS property for the current directory. Definitions with non−trivial values may be left in the set of flags instead of being converted for reasons of backwards compatibility. See documentation of the directory, target, and source file COMPILE_DEFINITIONS properties for details on adding preprocessor definitions to specific scopes and configurations. add_dependencies  Add a dependency between top−level targets. add_dependencies(target−name depend−target1 depend−target2 ...)Make a top−level target depend on other top−level targets. A top−level target is one created by ADD_EXECUTABLE, ADD_LIBRARY, or ADD_CUSTOM_TARGET. Adding dependencies with this command can be used to make sure one target is built before another target. Dependencies added to an IMPORTED target are followed transitively in its place since the target itself does not build. See the DEPENDS option of ADD_CUSTOM_TARGET and ADD_CUSTOM_COMMAND for adding file−level dependencies in custom rules. See the OBJECT_DEPENDS option in SET_SOURCE_FILES_PROPERTIES to add file−level dependencies to object files. add_executable  Add an executable to the project using the specified source files. add_executable(<name> [WIN32] [MACOSX_BUNDLE] [EXCLUDE_FROM_ALL] source1 source2 ... sourceN)Adds an executable target called <name> to be built from the source files listed in the command invocation. The <name> corresponds to the logical target name and must be globally unique within a project. The actual file name of the executable built is constructed based on conventions of the native platform (such as <name>.exe or just <name>). By default the executable file will be created in the build tree directory corresponding to the source tree directory in which the command was invoked. See documentation of the RUNTIME_OUTPUT_DIRECTORY target property to change this location. See documentation of the OUTPUT_NAME target property to change the <name> part of the final file name. If WIN32 is given the property WIN32_EXECUTABLE will be set on the target created. See documentation of that target property for details. If MACOSX_BUNDLE is given the corresponding property will be set on the created target. See documentation of the MACOSX_BUNDLE target property for details. If EXCLUDE_FROM_ALL is given the corresponding property will be set on the created target. See documentation of the EXCLUDE_FROM_ALL target property for details. The add_executable command can also create IMPORTED executable targets using this signature: add_executable(<name> IMPORTED [GLOBAL])An IMPORTED executable target references an executable file located outside the project. No rules are generated to build it. The target name has scope in the directory in which it is created and below, but the GLOBAL option extends visibility. It may be referenced like any target built within the project. IMPORTED executables are useful for convenient reference from commands like add_custom_command. Details about the imported executable are specified by setting properties whose names begin in "IMPORTED_". The most important such property is IMPORTED_LOCATION (and its per−configuration version IMPORTED_LOCATION_<CONFIG>) which specifies the location of the main executable file on disk. See documentation of the IMPORTED_* properties for more information. The signature add_executable(<name> ALIAS <target>)creates an alias, such that <name> can be used to refer to <target> in subsequent commands. The <name> does not appear in the generated buildsystem as a make target. The <target> may not be an IMPORTED target or an ALIAS. Alias targets can be used as linkable targets, targets to read properties from, executables for custom commands and custom targets. They can also be tested for existance with the regular if(TARGET) subcommand. The <name> may not be used to modify properties of <target>, that is, it may not be used as the operand of set_property, set_target_properties, target_link_libraries etc. An ALIAS target may not be installed of exported. add_library  Add a library to the project using the specified source files. add_library(<name> [STATIC | SHARED | MODULE] [EXCLUDE_FROM_ALL] source1 source2 ... sourceN)Adds a library target called <name> to be built from the source files listed in the command invocation. The <name> corresponds to the logical target name and must be globally unique within a project. The actual file name of the library built is constructed based on conventions of the native platform (such as lib<name>.a or <name>.lib). STATIC, SHARED, or MODULE may be given to specify the type of library to be created. STATIC libraries are archives of object files for use when linking other targets. SHARED libraries are linked dynamically and loaded at runtime. MODULE libraries are plugins that are not linked into other targets but may be loaded dynamically at runtime using dlopen−like functionality. If no type is given explicitly the type is STATIC or SHARED based on whether the current value of the variable BUILD_SHARED_LIBS is true. For SHARED and MODULE libraries the POSITION_INDEPENDENT_CODE target property is set to TRUE automatically. By default the library file will be created in the build tree directory corresponding to the source tree directory in which the command was invoked. See documentation of the ARCHIVE_OUTPUT_DIRECTORY, LIBRARY_OUTPUT_DIRECTORY, and RUNTIME_OUTPUT_DIRECTORY target properties to change this location. See documentation of the OUTPUT_NAME target property to change the <name> part of the final file name. If EXCLUDE_FROM_ALL is given the corresponding property will be set on the created target. See documentation of the EXCLUDE_FROM_ALL target property for details. The add_library command can also create IMPORTED library targets using this signature: add_library(<name> <SHARED|STATIC|MODULE|UNKNOWN> IMPORTED [GLOBAL])An IMPORTED library target references a library file located outside the project. No rules are generated to build it. The target name has scope in the directory in which it is created and below, but the GLOBAL option extends visibility. It may be referenced like any target built within the project. IMPORTED libraries are useful for convenient reference from commands like target_link_libraries. Details about the imported library are specified by setting properties whose names begin in "IMPORTED_". The most important such property is IMPORTED_LOCATION (and its per−configuration version IMPORTED_LOCATION_<CONFIG>) which specifies the location of the main library file on disk. See documentation of the IMPORTED_* properties for more information. The signature add_library(<name> OBJECT <src>...)creates a special "object library" target. An object library compiles source files but does not archive or link their object files into a library. Instead other targets created by add_library or add_executable may reference the objects using an expression of the form $<TARGET_OBJECTS:objlib> as a source, where "objlib" is the object library name. For example: add_library(... $<TARGET_OBJECTS:objlib> ...) add_executable(... $<TARGET_OBJECTS:objlib> ...)will include objlib's object files in a library and an executable along with those compiled from their own sources. Object libraries may contain only sources (and headers) that compile to object files. They may contain custom commands generating such sources, but not PRE_BUILD, PRE_LINK, or POST_BUILD commands. Object libraries cannot be imported, exported, installed, or linked. Some native build systems may not like targets that have only object files, so consider adding at least one real source file to any target that references $<TARGET_OBJECTS:objlib>. The signature add_library(<name> ALIAS <target>)creates an alias, such that <name> can be used to refer to <target> in subsequent commands. The <name> does not appear in the generated buildsystem as a make target. The <target> may not be an IMPORTED target or an ALIAS. Alias targets can be used as linkable targets, targets to read properties from. They can also be tested for existance with the regular if(TARGET) subcommand. The <name> may not be used to modify properties of <target>, that is, it may not be used as the operand of set_property, set_target_properties, target_link_libraries etc. An ALIAS target may not be installed of exported. add_subdirectory  Add a subdirectory to the build. add_subdirectory(source_dir [binary_dir] [EXCLUDE_FROM_ALL])Add a subdirectory to the build. The source_dir specifies the directory in which the source CMakeLists.txt and code files are located. If it is a relative path it will be evaluated with respect to the current directory (the typical usage), but it may also be an absolute path. The binary_dir specifies the directory in which to place the output files. If it is a relative path it will be evaluated with respect to the current output directory, but it may also be an absolute path. If binary_dir is not specified, the value of source_dir, before expanding any relative path, will be used (the typical usage). The CMakeLists.txt file in the specified source directory will be processed immediately by CMake before processing in the current input file continues beyond this command. If the EXCLUDE_FROM_ALL argument is provided then targets in the subdirectory will not be included in the ALL target of the parent directory by default, and will be excluded from IDE project files. Users must explicitly build targets in the subdirectory. This is meant for use when the subdirectory contains a separate part of the project that is useful but not necessary, such as a set of examples. Typically the subdirectory should contain its own project() command invocation so that a full build system will be generated in the subdirectory (such as a VS IDE solution file). Note that inter−target dependencies supercede this exclusion. If a target built by the parent project depends on a target in the subdirectory, the dependee target will be included in the parent project build system to satisfy the dependency. add_test  Add a test to the project with the specified arguments. add_test(testname Exename arg1 arg2 ... )If the ENABLE_TESTING command has been run, this command adds a test target to the current directory. If ENABLE_TESTING has not been run, this command does nothing. The tests are run by the testing subsystem by executing Exename with the specified arguments. Exename can be either an executable built by this project or an arbitrary executable on the system (like tclsh). The test will be run with the current working directory set to the CMakeList.txt files corresponding directory in the binary tree. add_test(NAME <name> [CONFIGURATIONS [Debug|Release|...]] [WORKING_DIRECTORY dir] COMMAND <command> [arg1 [arg2 ...]])Add a test called <name>. The test name may not contain spaces, quotes, or other characters special in CMake syntax. If COMMAND specifies an executable target (created by add_executable) it will automatically be replaced by the location of the executable created at build time. If a CONFIGURATIONS option is given then the test will be executed only when testing under one of the named configurations. If a WORKING_DIRECTORY option is given then the test will be executed in the given directory. Arguments after COMMAND may use "generator expressions" with the syntax "$<...>". Generator expressions are evaluated during build system generation to produce information specific to each build configuration. Valid expressions are: $<0:...> = empty string (ignores "...") $<1:...> = content of "..." $<CONFIG:cfg> = '1' if config is "cfg", else '0' $<CONFIGURATION> = configuration name $<BOOL:...> = '1' if the '...' is true, else '0' $<STREQUAL:a,b> = '1' if a is STREQUAL b, else '0' $<ANGLE−R> = A literal '>'. Used to compare strings which contain a '>' for example. $<COMMA> = A literal ','. Used to compare strings which contain a ',' for example. $<SEMICOLON> = A literal ';'. Used to prevent list expansion on an argument with ';'. $<JOIN:list,...> = joins the list with the content of "..." $<TARGET_NAME:...> = Marks ... as being the name of a target. This is required if exporting targets to multiple dependent export sets. The '...' must be a literal name of a target− it may not contain generator expressions. $<INSTALL_INTERFACE:...> = content of "..." when the property is exported using install(EXPORT), and empty otherwise. $<BUILD_INTERFACE:...> = content of "..." when the property is exported using export(), or when the target is used by another target in the same buildsystem. Expands to the empty string otherwise. $<C_COMPILER_ID> = The CMake−id of the C compiler used. $<C_COMPILER_ID:comp> = '1' if the CMake−id of the C compiler matches comp, otherwise '0'. $<CXX_COMPILER_ID> = The CMake−id of the CXX compiler used. $<CXX_COMPILER_ID:comp> = '1' if the CMake−id of the CXX compiler matches comp, otherwise '0'. $<VERSION_GREATER:v1,v2> = '1' if v1 is a version greater than v2, else '0'. $<VERSION_LESS:v1,v2> = '1' if v1 is a version less than v2, else '0'. $<VERSION_EQUAL:v1,v2> = '1' if v1 is the same version as v2, else '0'. $<C_COMPILER_VERSION> = The version of the C compiler used. $<C_COMPILER_VERSION:ver> = '1' if the version of the C compiler matches ver, otherwise '0'. $<CXX_COMPILER_VERSION> = The version of the CXX compiler used. $<CXX_COMPILER_VERSION:ver> = '1' if the version of the CXX compiler matches ver, otherwise '0'. $<TARGET_FILE:tgt> = main file (.exe, .so.1.2, .a) $<TARGET_LINKER_FILE:tgt> = file used to link (.a, .lib, .so) $<TARGET_SONAME_FILE:tgt> = file with soname (.so.3)where "tgt" is the name of a target. Target file expressions produce a full path, but _DIR and _NAME versions can produce the directory and file name components: $<TARGET_FILE_DIR:tgt>/$<TARGET_FILE_NAME:tgt> $<TARGET_LINKER_FILE_DIR:tgt>/$<TARGET_LINKER_FILE_NAME:tgt> $<TARGET_SONAME_FILE_DIR:tgt>/$<TARGET_SONAME_FILE_NAME:tgt> $<TARGET_PROPERTY:tgt,prop> = The value of the property prop on the target tgt.Note that tgt is not added as a dependency of the target this expression is evaluated on. $<TARGET_POLICY:pol> = '1' if the policy was NEW when the 'head' target was created, else '0'. If the policy was not set, the warning message for the policy will be emitted. This generator expression only works for a subset of policies. $<INSTALL_PREFIX> = Content of the install prefix when the target is exported via INSTALL(EXPORT) and empty otherwise.Boolean expressions: $<AND:?[,?]...> = '1' if all '?' are '1', else '0' $<OR:?[,?]...> = '0' if all '?' are '0', else '1' $<NOT:?> = '0' if '?' is '1', else '1'where '?' is always either '0' or '1'. Example usage: add_test(NAME mytest COMMAND testDriver −−config $<CONFIGURATION> −−exe $<TARGET_FILE:myexe>)This creates a test "mytest" whose command runs a testDriver tool passing the configuration name and the full path to the executable file produced by target "myexe". aux_source_directory  Find all source files in a directory. aux_source_directory(<dir> <variable>)Collects the names of all the source files in the specified directory and stores the list in the <variable> provided. This command is intended to be used by projects that use explicit template instantiation. Template instantiation files can be stored in a "Templates" subdirectory and collected automatically using this command to avoid manually listing all instantiations. It is tempting to use this command to avoid writing the list of source files for a library or executable target. While this seems to work, there is no way for CMake to generate a build system that knows when a new source file has been added. Normally the generated build system knows when it needs to rerun CMake because the CMakeLists.txt file is modified to add a new source. When the source is just added to the directory without modifying this file, one would have to manually rerun CMake to generate a build system incorporating the new file. break  Break from an enclosing foreach or while loop. break()Breaks from an enclosing foreach loop or while loop build_command  Get the command line to build this project. build_command(<variable> [CONFIGURATION <config>] [PROJECT_NAME <projname>] [TARGET <target>])Sets the given <variable> to a string containing the command line for building one configuration of a target in a project using the build tool appropriate for the current CMAKE_GENERATOR. If CONFIGURATION is omitted, CMake chooses a reasonable default value for multi−configuration generators. CONFIGURATION is ignored for single−configuration generators. If PROJECT_NAME is omitted, the resulting command line will build the top level PROJECT in the current build tree. If TARGET is omitted, the resulting command line will build everything, effectively using build target 'all' or 'ALL_BUILD'. build_command(<cachevariable> <makecommand>)This second signature is deprecated, but still available for backwards compatibility. Use the first signature instead. Sets the given <cachevariable> to a string containing the command to build this project from the root of the build tree using the build tool given by <makecommand>. <makecommand> should be the full path to msdev, devenv, nmake, make or one of the end user build tools. cmake_host_system_information  Query host system specific information. cmake_host_system_information(RESULT <variable> QUERY <key> ...)Queries system information of the host system on which cmake runs. One or more <key> can be provided to select the information to be queried. The list of queried values is stored in <variable>. <key> can be one of the following values: NUMBER_OF_LOGICAL_CORES = Number of logical cores. NUMBER_OF_PHYSICAL_CORES = Number of physical cores. HOSTNAME = Hostname. FQDN = Fully qualified domain name. TOTAL_VIRTUAL_MEMORY = Total virtual memory in megabytes. AVAILABLE_VIRTUAL_MEMORY = Available virtual memory in megabytes. TOTAL_PHYSICAL_MEMORY = Total physical memory in megabytes. AVAILABLE_PHYSICAL_MEMORY = Available physical memory in megabytes.cmake_minimum_required  Set the minimum required version of cmake for a project. cmake_minimum_required(VERSION major[.minor[.patch[.tweak]]] [FATAL_ERROR])If the current version of CMake is lower than that required it will stop processing the project and report an error. When a version higher than 2.4 is specified the command implicitly invokes cmake_policy(VERSION major[.minor[.patch[.tweak]]])which sets the cmake policy version level to the version specified. When version 2.4 or lower is given the command implicitly invokes cmake_policy(VERSION 2.4)which enables compatibility features for CMake 2.4 and lower. The FATAL_ERROR option is accepted but ignored by CMake 2.6 and higher. It should be specified so CMake versions 2.4 and lower fail with an error instead of just a warning. cmake_policy  Manage CMake Policy settings. As CMake evolves it is sometimes necessary to change existing behavior in order to fix bugs or improve implementations of existing features. The CMake Policy mechanism is designed to help keep existing projects building as new versions of CMake introduce changes in behavior. Each new policy (behavioral change) is given an identifier of the form "CMP<NNNN>" where "<NNNN>" is an integer index. Documentation associated with each policy describes the OLD and NEW behavior and the reason the policy was introduced. Projects may set each policy to select the desired behavior. When CMake needs to know which behavior to use it checks for a setting specified by the project. If no setting is available the OLD behavior is assumed and a warning is produced requesting that the policy be set. The cmake_policy command is used to set policies to OLD or NEW behavior. While setting policies individually is supported, we encourage projects to set policies based on CMake versions. cmake_policy(VERSION major.minor[.patch[.tweak]])Specify that the current CMake list file is written for the given version of CMake. All policies introduced in the specified version or earlier will be set to use NEW behavior. All policies introduced after the specified version will be unset (unless variable CMAKE_POLICY_DEFAULT_CMP<NNNN> sets a default). This effectively requests behavior preferred as of a given CMake version and tells newer CMake versions to warn about their new policies. The policy version specified must be at least 2.4 or the command will report an error. In order to get compatibility features supporting versions earlier than 2.4 see documentation of policy CMP0001. cmake_policy(SET CMP<NNNN> NEW) cmake_policy(SET CMP<NNNN> OLD)Tell CMake to use the OLD or NEW behavior for a given policy. Projects depending on the old behavior of a given policy may silence a policy warning by setting the policy state to OLD. Alternatively one may fix the project to work with the new behavior and set the policy state to NEW. cmake_policy(GET CMP<NNNN> <variable>)Check whether a given policy is set to OLD or NEW behavior. The output variable value will be "OLD" or "NEW" if the policy is set, and empty otherwise. CMake keeps policy settings on a stack, so changes made by the cmake_policy command affect only the top of the stack. A new entry on the policy stack is managed automatically for each subdirectory to protect its parents and siblings. CMake also manages a new entry for scripts loaded by include() and find_package() commands except when invoked with the NO_POLICY_SCOPE option (see also policy CMP0011). The cmake_policy command provides an interface to manage custom entries on the policy stack: cmake_policy(PUSH) cmake_policy(POP)Each PUSH must have a matching POP to erase any changes. This is useful to make temporary changes to policy settings. Functions and macros record policy settings when they are created and use the pre−record policies when they are invoked. If the function or macro implementation sets policies, the changes automatically propagate up through callers until they reach the closest nested policy stack entry. configure_file  Copy a file to another location and modify its contents. configure_file(<input> <output> [COPYONLY] [ESCAPE_QUOTES] [@ONLY] [NEWLINE_STYLE [UNIX|DOS|WIN32|LF|CRLF] ])Copies a file <input> to file <output> and substitutes variable values referenced in the file content. If <input> is a relative path it is evaluated with respect to the current source directory. The <input> must be a file, not a directory. If <output> is a relative path it is evaluated with respect to the current binary directory. If <output> names an existing directory the input file is placed in that directory with its original name. If the <input> file is modified the build system will re−run CMake to re−configure the file and generate the build system again. This command replaces any variables in the input file referenced as ${VAR} or @VAR@ with their values as determined by CMake. If a variable is not defined, it will be replaced with nothing. If COPYONLY is specified, then no variable expansion will take place. If ESCAPE_QUOTES is specified then any substituted quotes will be C−style escaped. The file will be configured with the current values of CMake variables. If @ONLY is specified, only variables of the form @VAR@ will be replaced and ${VAR} will be ignored. This is useful for configuring scripts that use ${VAR}. Input file lines of the form "#cmakedefine VAR ..." will be replaced with either "#define VAR ..." or "/* #undef VAR */" depending on whether VAR is set in CMake to any value not considered a false constant by the if() command. (Content of "...", if any, is processed as above.) Input file lines of the form "#cmakedefine01 VAR" will be replaced with either "#define VAR 1" or "#define VAR 0" similarly. With NEWLINE_STYLE the line ending could be adjusted: 'UNIX' or 'LF' for \n, 'DOS', 'WIN32' or 'CRLF' for \\r\\n.COPYONLY must not be used with NEWLINE_STYLE. create_test_sourcelist  Create a test driver and source list for building test programs. create_test_sourcelist(sourceListName driverName test1 test2 test3 EXTRA_INCLUDE include.h FUNCTION function)A test driver is a program that links together many small tests into a single executable. This is useful when building static executables with large libraries to shrink the total required size. The list of source files needed to build the test driver will be in sourceListName. DriverName is the name of the test driver program. The rest of the arguments consist of a list of test source files, can be semicolon separated. Each test source file should have a function in it that is the same name as the file with no extension (foo.cxx should have int foo(int, char*[]);) DriverName will be able to call each of the tests by name on the command line. If EXTRA_INCLUDE is specified, then the next argument is included into the generated file. If FUNCTION is specified, then the next argument is taken as a function name that is passed a pointer to ac and av. This can be used to add extra command line processing to each test. The cmake variable CMAKE_TESTDRIVER_BEFORE_TESTMAIN can be set to have code that will be placed directly before calling the test main function. CMAKE_TESTDRIVER_AFTER_TESTMAIN can be set to have code that will be placed directly after the call to the test main function. define_property  Define and document custom properties. define_property(<GLOBAL | DIRECTORY | TARGET | SOURCE | TEST | VARIABLE | CACHED_VARIABLE> PROPERTY <name> [INHERITED] BRIEF_DOCS <brief−doc> [docs...] FULL_DOCS <full−doc> [docs...])Define one property in a scope for use with the set_property and get_property commands. This is primarily useful to associate documentation with property names that may be retrieved with the get_property command. The first argument determines the kind of scope in which the property should be used. It must be one of the following: GLOBAL = associated with the global namespace DIRECTORY = associated with one directory TARGET = associated with one target SOURCE = associated with one source file TEST = associated with a test named with add_test VARIABLE = documents a CMake language variable CACHED_VARIABLE = documents a CMake cache variableNote that unlike set_property and get_property no actual scope needs to be given; only the kind of scope is important. The required PROPERTY option is immediately followed by the name of the property being defined. If the INHERITED option then the get_property command will chain up to the next higher scope when the requested property is not set in the scope given to the command. DIRECTORY scope chains to GLOBAL. TARGET, SOURCE, and TEST chain to DIRECTORY. The BRIEF_DOCS and FULL_DOCS options are followed by strings to be associated with the property as its brief and full documentation. Corresponding options to the get_property command will retrieve the documentation. else  Starts the else portion of an if block. else(expression)See the if command. elseif  Starts the elseif portion of an if block. elseif(expression)See the if command. enable_language  Enable a language (CXX/C/Fortran/etc) enable_language(<lang> [OPTIONAL] )This command enables support for the named language in CMake. This is the same as the project command but does not create any of the extra variables that are created by the project command. Example languages are CXX, C, Fortran. This command must be called in file scope, not in a function call. Furthermore, it must be called in the highest directory common to all targets using the named language directly for compiling sources or indirectly through link dependencies. It is simplest to enable all needed languages in the top−level directory of a project. The OPTIONAL keyword is a placeholder for future implementation and does not currently work. enable_testing  Enable testing for current directory and below. enable_testing()Enables testing for this directory and below. See also the add_test command. Note that ctest expects to find a test file in the build directory root. Therefore, this command should be in the source directory root. endforeach  Ends a list of commands in a FOREACH block. endforeach(expression)See the FOREACH command. endfunction  Ends a list of commands in a function block. endfunction(expression)See the function command. endif  Ends a list of commands in an if block. endif(expression)See the if command. endmacro  Ends a list of commands in a macro block. endmacro(expression)See the macro command. endwhile  Ends a list of commands in a while block. endwhile(expression)See the while command. execute_process  Execute one or more child processes. execute_process(COMMAND <cmd1> [args1...]] [COMMAND <cmd2> [args2...] [...]] [WORKING_DIRECTORY <directory>] [TIMEOUT <seconds>] [RESULT_VARIABLE <variable>] [OUTPUT_VARIABLE <variable>] [ERROR_VARIABLE <variable>] [INPUT_FILE <file>] [OUTPUT_FILE <file>] [ERROR_FILE <file>] [OUTPUT_QUIET] [ERROR_QUIET] [OUTPUT_STRIP_TRAILING_WHITESPACE] [ERROR_STRIP_TRAILING_WHITESPACE])Runs the given sequence of one or more commands with the standard output of each process piped to the standard input of the next. A single standard error pipe is used for all processes. If WORKING_DIRECTORY is given the named directory will be set as the current working directory of the child processes. If TIMEOUT is given the child processes will be terminated if they do not finish in the specified number of seconds (fractions are allowed). If RESULT_VARIABLE is given the variable will be set to contain the result of running the processes. This will be an integer return code from the last child or a string describing an error condition. If OUTPUT_VARIABLE or ERROR_VARIABLE are given the variable named will be set with the contents of the standard output and standard error pipes respectively. If the same variable is named for both pipes their output will be merged in the order produced. If INPUT_FILE, OUTPUT_FILE, or ERROR_FILE is given the file named will be attached to the standard input of the first process, standard output of the last process, or standard error of all processes respectively. If OUTPUT_QUIET or ERROR_QUIET is given then the standard output or standard error results will be quietly ignored. If more than one OUTPUT_* or ERROR_* option is given for the same pipe the precedence is not specified. If no OUTPUT_* or ERROR_* options are given the output will be shared with the corresponding pipes of the CMake process itself. The execute_process command is a newer more powerful version of exec_program, but the old command has been kept for compatibility. export  Export targets from the build tree for use by outside projects. export(TARGETS [target1 [target2 [...]]] [NAMESPACE <namespace>] [APPEND] FILE <filename> [EXPORT_LINK_INTERFACE_LIBRARIES])Create a file <filename> that may be included by outside projects to import targets from the current project's build tree. This is useful during cross−compiling to build utility executables that can run on the host platform in one project and then import them into another project being compiled for the target platform. If the NAMESPACE option is given the <namespace> string will be prepended to all target names written to the file. If the APPEND option is given the generated code will be appended to the file instead of overwriting it. The EXPORT_LINK_INTERFACE_LIBRARIES keyword, if present, causes the contents of the properties matching (IMPORTED_)?LINK_INTERFACE_LIBRARIES(_<CONFIG>)? to be exported, when policy CMP0022 is NEW. If a library target is included in the export but a target to which it links is not included the behavior is unspecified. The file created by this command is specific to the build tree and should never be installed. See the install(EXPORT) command to export targets from an installation tree. Do not set properties that affect the location of a target after passing it to this command. These include properties whose names match "(RUNTIME|LIBRARY|ARCHIVE)_OUTPUT_(NAME|DIRECTORY)(_<CONFIG>)?", "(IMPLIB_)?(PREFIX|SUFFIX)", or "LINKER_LANGUAGE". Failure to follow this rule is not diagnosed and leaves the location of the target undefined. export(PACKAGE <name>)Store the current build directory in the CMake user package registry for package <name>. The find_package command may consider the directory while searching for package <name>. This helps dependent projects find and use a package from the current project's build tree without help from the user. Note that the entry in the package registry that this command creates works only in conjunction with a package configuration file (<name>Config.cmake) that works with the build tree. file  File manipulation command. file(WRITE filename "message to write"... ) file(APPEND filename "message to write"... ) file(READ filename variable [LIMIT numBytes] [OFFSET offset] [HEX]) file(<MD5|SHA1|SHA224|SHA256|SHA384|SHA512> filename variable) file(STRINGS filename variable [LIMIT_COUNT num] [LIMIT_INPUT numBytes] [LIMIT_OUTPUT numBytes] [LENGTH_MINIMUM numBytes] [LENGTH_MAXIMUM numBytes] [NEWLINE_CONSUME] [REGEX regex] [NO_HEX_CONVERSION]) file(GLOB variable [RELATIVE path] [globbing expressions]...) file(GLOB_RECURSE variable [RELATIVE path] [FOLLOW_SYMLINKS] [globbing expressions]...) file(RENAME <oldname> <newname>) file(REMOVE [file1 ...]) file(REMOVE_RECURSE [file1 ...]) file(MAKE_DIRECTORY [directory1 directory2 ...]) file(RELATIVE_PATH variable directory file) file(TO_CMAKE_PATH path result) file(TO_NATIVE_PATH path result) file(DOWNLOAD url file [INACTIVITY_TIMEOUT timeout] [TIMEOUT timeout] [STATUS status] [LOG log] [SHOW_PROGRESS] [EXPECTED_HASH ALGO=value] [EXPECTED_MD5 sum] [TLS_VERIFY on|off] [TLS_CAINFO file]) file(UPLOAD filename url [INACTIVITY_TIMEOUT timeout] [TIMEOUT timeout] [STATUS status] [LOG log] [SHOW_PROGRESS]) file(TIMESTAMP filename variable [<format string>] [UTC]) file(GENERATE OUTPUT output_file <INPUT input_file|CONTENT input_content> [CONDITION expression])WRITE will write a message into a file called 'filename'. It overwrites the file if it already exists, and creates the file if it does not exist. (If the file is a build input, use configure_file to update the file only when its content changes.) APPEND will write a message into a file same as WRITE, except it will append it to the end of the file READ will read the content of a file and store it into the variable. It will start at the given offset and read up to numBytes. If the argument HEX is given, the binary data will be converted to hexadecimal representation and this will be stored in the variable. MD5, SHA1, SHA224, SHA256, SHA384, and SHA512 will compute a cryptographic hash of the content of a file. STRINGS will parse a list of ASCII strings from a file and store it in a variable. Binary data in the file are ignored. Carriage return (CR) characters are ignored. It works also for Intel Hex and Motorola S−record files, which are automatically converted to binary format when reading them. Disable this using NO_HEX_CONVERSION. LIMIT_COUNT sets the maximum number of strings to return. LIMIT_INPUT sets the maximum number of bytes to read from the input file. LIMIT_OUTPUT sets the maximum number of bytes to store in the output variable. LENGTH_MINIMUM sets the minimum length of a string to return. Shorter strings are ignored. LENGTH_MAXIMUM sets the maximum length of a string to return. Longer strings are split into strings no longer than the maximum length. NEWLINE_CONSUME allows newlines to be included in strings instead of terminating them. REGEX specifies a regular expression that a string must match to be returned. Typical usage file(STRINGS myfile.txt myfile)stores a list in the variable "myfile" in which each item is a line from the input file. GLOB will generate a list of all files that match the globbing expressions and store it into the variable. Globbing expressions are similar to regular expressions, but much simpler. If RELATIVE flag is specified for an expression, the results will be returned as a relative path to the given path. (We do not recommend using GLOB to collect a list of source files from your source tree. If no CMakeLists.txt file changes when a source is added or removed then the generated build system cannot know when to ask CMake to regenerate.) Examples of globbing expressions include: *.cxx − match all files with extension cxx *.vt? − match all files with extension vta,...,vtz f[3−5].txt − match files f3.txt, f4.txt, f5.txtGLOB_RECURSE will generate a list similar to the regular GLOB, except it will traverse all the subdirectories of the matched directory and match the files. Subdirectories that are symlinks are only traversed if FOLLOW_SYMLINKS is given or cmake policy CMP0009 is not set to NEW. See cmake −−help−policy CMP0009 for more information. Examples of recursive globbing include: /dir/*.py − match all python files in /dir and subdirectoriesMAKE_DIRECTORY will create the given directories, also if their parent directories don't exist yet RENAME moves a file or directory within a filesystem, replacing the destination atomically. REMOVE will remove the given files, also in subdirectories REMOVE_RECURSE will remove the given files and directories, also non−empty directories RELATIVE_PATH will determine relative path from directory to the given file. TO_CMAKE_PATH will convert path into a cmake style path with unix /. The input can be a single path or a system path like "$ENV{PATH}". Note the double quotes around the ENV call TO_CMAKE_PATH only takes one argument. This command will also convert the native list delimiters for a list of paths like the PATH environment variable. TO_NATIVE_PATH works just like TO_CMAKE_PATH, but will convert from a cmake style path into the native path style  for windows and / for UNIX. DOWNLOAD will download the given URL to the given file. If LOG var is specified a log of the download will be put in var. If STATUS var is specified the status of the operation will be put in var. The status is returned in a list of length 2. The first element is the numeric return value for the operation, and the second element is a string value for the error. A 0 numeric error means no error in the operation. If TIMEOUT time is specified, the operation will timeout after time seconds, time should be specified as an integer. The INACTIVITY_TIMEOUT specifies an integer number of seconds of inactivity after which the operation should terminate. If EXPECTED_HASH ALGO=value is specified, the operation will verify that the downloaded file's actual hash matches the expected value, where ALGO is one of MD5, SHA1, SHA224, SHA256, SHA384, or SHA512. If it does not match, the operation fails with an error. ("EXPECTED_MD5 sum" is short−hand for "EXPECTED_HASH MD5=sum".) If SHOW_PROGRESS is specified, progress information will be printed as status messages until the operation is complete. For https URLs CMake must be built with OpenSSL. TLS/SSL certificates are not checked by default. Set TLS_VERIFY to ON to check certificates and/or use EXPECTED_HASH to verify downloaded content. Set TLS_CAINFO to specify a custom Certificate Authority file. If either TLS option is not given CMake will check variables CMAKE_TLS_VERIFY and CMAKE_TLS_CAINFO, respectively. UPLOAD will upload the given file to the given URL. If LOG var is specified a log of the upload will be put in var. If STATUS var is specified the status of the operation will be put in var. The status is returned in a list of length 2. The first element is the numeric return value for the operation, and the second element is a string value for the error. A 0 numeric error means no error in the operation. If TIMEOUT time is specified, the operation will timeout after time seconds, time should be specified as an integer. The INACTIVITY_TIMEOUT specifies an integer number of seconds of inactivity after which the operation should terminate. If SHOW_PROGRESS is specified, progress information will be printed as status messages until the operation is complete. TIMESTAMP will write a string representation of the modification time of filename to variable. Should the command be unable to obtain a timestamp variable will be set to the empty string "". See documentation of the string TIMESTAMP sub−command for more details. The file() command also provides COPY and INSTALL signatures: file(<COPY|INSTALL> files... DESTINATION <dir> [FILE_PERMISSIONS permissions...] [DIRECTORY_PERMISSIONS permissions...] [NO_SOURCE_PERMISSIONS] [USE_SOURCE_PERMISSIONS] [FILES_MATCHING] [[PATTERN <pattern> | REGEX <regex>] [EXCLUDE] [PERMISSIONS permissions...]] [...])The COPY signature copies files, directories, and symlinks to a destination folder. Relative input paths are evaluated with respect to the current source directory, and a relative destination is evaluated with respect to the current build directory. Copying preserves input file timestamps, and optimizes out a file if it exists at the destination with the same timestamp. Copying preserves input permissions unless explicit permissions or NO_SOURCE_PERMISSIONS are given (default is USE_SOURCE_PERMISSIONS). See the install(DIRECTORY) command for documentation of permissions, PATTERN, REGEX, and EXCLUDE options. The INSTALL signature differs slightly from COPY: it prints status messages, and NO_SOURCE_PERMISSIONS is default. Installation scripts generated by the install() command use this signature (with some undocumented options for internal use). GENERATE will write an <output_file> with content from an <input_file>, or from <input_content>. The output is generated conditionally based on the content of the <condition>. The file is written at CMake generate−time and the input may contain generator expressions. The <condition>, <output_file> and <input_file> may also contain generator expressions. The <condition> must evaluate to either '0' or '1'. The <output_file> must evaluate to a unique name among all configurations and among all invocations of file(GENERATE). find_file  Find the full path to a file. find_file(<VAR> name1 [path1 path2 ...])This is the short−hand signature for the command that is sufficient in many cases. It is the same as find_file(<VAR> name1 [PATHS path1 path2 ...]) find_file( <VAR> name | NAMES name1 [name2 ...] [HINTS path1 [path2 ... ENV var]] [PATHS path1 [path2 ... ENV var]] [PATH_SUFFIXES suffix1 [suffix2 ...]] [DOC "cache documentation string"] [NO_DEFAULT_PATH] [NO_CMAKE_ENVIRONMENT_PATH] [NO_CMAKE_PATH] [NO_SYSTEM_ENVIRONMENT_PATH] [NO_CMAKE_SYSTEM_PATH] [CMAKE_FIND_ROOT_PATH_BOTH | ONLY_CMAKE_FIND_ROOT_PATH | NO_CMAKE_FIND_ROOT_PATH] )This command is used to find a full path to named file. A cache entry named by <VAR> is created to store the result of this command. If the full path to a file is found the result is stored in the variable and the search will not be repeated unless the variable is cleared. If nothing is found, the result will be <VAR>−NOTFOUND, and the search will be attempted again the next time find_file is invoked with the same variable. The name of the full path to a file that is searched for is specified by the names listed after the NAMES argument. Additional search locations can be specified after the PATHS argument. If ENV var is found in the HINTS or PATHS section the environment variable var will be read and converted from a system environment variable to a cmake style list of paths. For example ENV PATH would be a way to list the system path variable. The argument after DOC will be used for the documentation string in the cache. PATH_SUFFIXES specifies additional subdirectories to check below each search path. If NO_DEFAULT_PATH is specified, then no additional paths are added to the search. If NO_DEFAULT_PATH is not specified, the search process is as follows: 1. Search paths specified in cmake−specific cache variables. These are intended to be used on the command line with a −DVAR=value. This can be skipped if NO_CMAKE_PATH is passed. <prefix>/include/<arch> if CMAKE_LIBRARY_ARCHITECTURE is set, and <prefix>/include for each <prefix> in CMAKE_PREFIX_PATH CMAKE_INCLUDE_PATH CMAKE_FRAMEWORK_PATH2. Search paths specified in cmake−specific environment variables. These are intended to be set in the user's shell configuration. This can be skipped if NO_CMAKE_ENVIRONMENT_PATH is passed. <prefix>/include/<arch> if CMAKE_LIBRARY_ARCHITECTURE is set, and <prefix>/include for each <prefix> in CMAKE_PREFIX_PATH CMAKE_INCLUDE_PATH CMAKE_FRAMEWORK_PATH3. Search the paths specified by the HINTS option. These should be paths computed by system introspection, such as a hint provided by the location of another item already found. Hard−coded guesses should be specified with the PATHS option. 4. Search the standard system environment variables. This can be skipped if NO_SYSTEM_ENVIRONMENT_PATH is an argument. PATH INCLUDE5. Search cmake variables defined in the Platform files for the current system. This can be skipped if NO_CMAKE_SYSTEM_PATH is passed. <prefix>/include/<arch> if CMAKE_LIBRARY_ARCHITECTURE is set, and <prefix>/include for each <prefix> in CMAKE_SYSTEM_PREFIX_PATH CMAKE_SYSTEM_INCLUDE_PATH CMAKE_SYSTEM_FRAMEWORK_PATH6. Search the paths specified by the PATHS option or in the short−hand version of the command. These are typically hard−coded guesses. On Darwin or systems supporting OS X Frameworks, the cmake variable CMAKE_FIND_FRAMEWORK can be set to empty or one of the following: "FIRST" − Try to find frameworks before standard libraries or headers. This is the default on Darwin. "LAST" − Try to find frameworks after standard libraries or headers. "ONLY" − Only try to find frameworks. "NEVER" − Never try to find frameworks.On Darwin or systems supporting OS X Application Bundles, the cmake variable CMAKE_FIND_APPBUNDLE can be set to empty or one of the following: "FIRST" − Try to find application bundles before standard programs. This is the default on Darwin. "LAST" − Try to find application bundles after standard programs. "ONLY" − Only try to find application bundles. "NEVER" − Never try to find application bundles.The CMake variable CMAKE_FIND_ROOT_PATH specifies one or more directories to be prepended to all other search directories. This effectively "re−roots" the entire search under given locations. By default it is empty. It is especially useful when cross−compiling to point to the root directory of the target environment and CMake will search there too. By default at first the directories listed in CMAKE_FIND_ROOT_PATH and then the non−rooted directories will be searched. The default behavior can be adjusted by setting CMAKE_FIND_ROOT_PATH_MODE_INCLUDE. This behavior can be manually overridden on a per−call basis. By using CMAKE_FIND_ROOT_PATH_BOTH the search order will be as described above. If NO_CMAKE_FIND_ROOT_PATH is used then CMAKE_FIND_ROOT_PATH will not be used. If ONLY_CMAKE_FIND_ROOT_PATH is used then only the re−rooted directories will be searched. The default search order is designed to be most−specific to least−specific for common use cases. Projects may override the order by simply calling the command multiple times and using the NO_* options: find_file(<VAR> NAMES name PATHS paths... NO_DEFAULT_PATH) find_file(<VAR> NAMES name)Once one of the calls succeeds the result variable will be set and stored in the cache so that no call will search again. find_library  Find a library. find_library(<VAR> name1 [path1 path2 ...])This is the short−hand signature for the command that is sufficient in many cases. It is the same as find_library(<VAR> name1 [PATHS path1 path2 ...]) find_library( <VAR> name | NAMES name1 [name2 ...] [NAMES_PER_DIR] [HINTS path1 [path2 ... ENV var]] [PATHS path1 [path2 ... ENV var]] [PATH_SUFFIXES suffix1 [suffix2 ...]] [DOC "cache documentation string"] [NO_DEFAULT_PATH] [NO_CMAKE_ENVIRONMENT_PATH] [NO_CMAKE_PATH] [NO_SYSTEM_ENVIRONMENT_PATH] [NO_CMAKE_SYSTEM_PATH] [CMAKE_FIND_ROOT_PATH_BOTH | ONLY_CMAKE_FIND_ROOT_PATH | NO_CMAKE_FIND_ROOT_PATH] )This command is used to find a library. A cache entry named by <VAR> is created to store the result of this command. If the library is found the result is stored in the variable and the search will not be repeated unless the variable is cleared. If nothing is found, the result will be <VAR>−NOTFOUND, and the search will be attempted again the next time find_library is invoked with the same variable. The name of the library that is searched for is specified by the names listed after the NAMES argument. Additional search locations can be specified after the PATHS argument. If ENV var is found in the HINTS or PATHS section the environment variable var will be read and converted from a system environment variable to a cmake style list of paths. For example ENV PATH would be a way to list the system path variable. The argument after DOC will be used for the documentation string in the cache. PATH_SUFFIXES specifies additional subdirectories to check below each search path. If NO_DEFAULT_PATH is specified, then no additional paths are added to the search. If NO_DEFAULT_PATH is not specified, the search process is as follows: 1. Search paths specified in cmake−specific cache variables. These are intended to be used on the command line with a −DVAR=value. This can be skipped if NO_CMAKE_PATH is passed. <prefix>/lib/<arch> if CMAKE_LIBRARY_ARCHITECTURE is set, and <prefix>/lib for each <prefix> in CMAKE_PREFIX_PATH CMAKE_LIBRARY_PATH CMAKE_FRAMEWORK_PATH2. Search paths specified in cmake−specific environment variables. These are intended to be set in the user's shell configuration. This can be skipped if NO_CMAKE_ENVIRONMENT_PATH is passed. <prefix>/lib/<arch> if CMAKE_LIBRARY_ARCHITECTURE is set, and <prefix>/lib for each <prefix> in CMAKE_PREFIX_PATH CMAKE_LIBRARY_PATH CMAKE_FRAMEWORK_PATH3. Search the paths specified by the HINTS option. These should be paths computed by system introspection, such as a hint provided by the location of another item already found. Hard−coded guesses should be specified with the PATHS option. 4. Search the standard system environment variables. This can be skipped if NO_SYSTEM_ENVIRONMENT_PATH is an argument. PATH LIB5. Search cmake variables defined in the Platform files for the current system. This can be skipped if NO_CMAKE_SYSTEM_PATH is passed. <prefix>/lib/<arch> if CMAKE_LIBRARY_ARCHITECTURE is set, and <prefix>/lib for each <prefix> in CMAKE_SYSTEM_PREFIX_PATH CMAKE_SYSTEM_LIBRARY_PATH CMAKE_SYSTEM_FRAMEWORK_PATH6. Search the paths specified by the PATHS option or in the short−hand version of the command. These are typically hard−coded guesses. On Darwin or systems supporting OS X Frameworks, the cmake variable CMAKE_FIND_FRAMEWORK can be set to empty or one of the following: "FIRST" − Try to find frameworks before standard libraries or headers. This is the default on Darwin. "LAST" − Try to find frameworks after standard libraries or headers. "ONLY" − Only try to find frameworks. "NEVER" − Never try to find frameworks.On Darwin or systems supporting OS X Application Bundles, the cmake variable CMAKE_FIND_APPBUNDLE can be set to empty or one of the following: "FIRST" − Try to find application bundles before standard programs. This is the default on Darwin. "LAST" − Try to find application bundles after standard programs. "ONLY" − Only try to find application bundles. "NEVER" − Never try to find application bundles.The CMake variable CMAKE_FIND_ROOT_PATH specifies one or more directories to be prepended to all other search directories. This effectively "re−roots" the entire search under given locations. By default it is empty. It is especially useful when cross−compiling to point to the root directory of the target environment and CMake will search there too. By default at first the directories listed in CMAKE_FIND_ROOT_PATH and then the non−rooted directories will be searched. The default behavior can be adjusted by setting CMAKE_FIND_ROOT_PATH_MODE_LIBRARY. This behavior can be manually overridden on a per−call basis. By using CMAKE_FIND_ROOT_PATH_BOTH the search order will be as described above. If NO_CMAKE_FIND_ROOT_PATH is used then CMAKE_FIND_ROOT_PATH will not be used. If ONLY_CMAKE_FIND_ROOT_PATH is used then only the re−rooted directories will be searched. The default search order is designed to be most−specific to least−specific for common use cases. Projects may override the order by simply calling the command multiple times and using the NO_* options: find_library(<VAR> NAMES name PATHS paths... NO_DEFAULT_PATH) find_library(<VAR> NAMES name)Once one of the calls succeeds the result variable will be set and stored in the cache so that no call will search again. When more than one value is given to the NAMES option this command by default will consider one name at a time and search every directory for it. The NAMES_PER_DIR option tells this command to consider one directory at a time and search for all names in it. If the library found is a framework, then VAR will be set to the full path to the framework <fullPath>/A.framework. When a full path to a framework is used as a library, CMake will use a −framework A, and a −F<fullPath> to link the framework to the target. If the global property FIND_LIBRARY_USE_LIB64_PATHS is set all search paths will be tested as normal, with "64/" appended, and with all matches of "lib/" replaced with "lib64/". This property is automatically set for the platforms that are known to need it if at least one of the languages supported by the PROJECT command is enabled. find_package  Load settings for an external project. find_package(<package> [version] [EXACT] [QUIET] [MODULE] [REQUIRED] [[COMPONENTS] [components...]] [OPTIONAL_COMPONENTS components...] [NO_POLICY_SCOPE])Finds and loads settings from an external project. <package>_FOUND will be set to indicate whether the package was found. When the package is found package−specific information is provided through variables and imported targets documented by the package itself. The QUIET option disables messages if the package cannot be found. The MODULE option disables the second signature documented below. The REQUIRED option stops processing with an error message if the package cannot be found. A package−specific list of required components may be listed after the COMPONENTS option (or after the REQUIRED option if present). Additional optional components may be listed after OPTIONAL_COMPONENTS. Available components and their influence on whether a package is considered to be found are defined by the target package. The [version] argument requests a version with which the package found should be compatible (format is major[.minor[.patch[.tweak]]]). The EXACT option requests that the version be matched exactly. If no [version] and/or component list is given to a recursive invocation inside a find−module, the corresponding arguments are forwarded automatically from the outer call (including the EXACT flag for [version]). Version support is currently provided only on a package−by−package basis (details below). User code should generally look for packages using the above simple signature. The remainder of this command documentation specifies the full command signature and details of the search process. Project maintainers wishing to provide a package to be found by this command are encouraged to read on. The command has two modes by which it searches for packages: "Module" mode and "Config" mode. Module mode is available when the command is invoked with the above reduced signature. CMake searches for a file called "Find<package>.cmake" in the CMAKE_MODULE_PATH followed by the CMake installation. If the file is found, it is read and processed by CMake. It is responsible for finding the package, checking the version, and producing any needed messages. Many find−modules provide limited or no support for versioning; check the module documentation. If no module is found and the MODULE option is not given the command proceeds to Config mode. The complete Config mode command signature is: find_package(<package> [version] [EXACT] [QUIET] [REQUIRED] [[COMPONENTS] [components...]] [CONFIG|NO_MODULE] [NO_POLICY_SCOPE] [NAMES name1 [name2 ...]] [CONFIGS config1 [config2 ...]] [HINTS path1 [path2 ... ]] [PATHS path1 [path2 ... ]] [PATH_SUFFIXES suffix1 [suffix2 ...]] [NO_DEFAULT_PATH] [NO_CMAKE_ENVIRONMENT_PATH] [NO_CMAKE_PATH] [NO_SYSTEM_ENVIRONMENT_PATH] [NO_CMAKE_PACKAGE_REGISTRY] [NO_CMAKE_BUILDS_PATH] [NO_CMAKE_SYSTEM_PATH] [NO_CMAKE_SYSTEM_PACKAGE_REGISTRY] [CMAKE_FIND_ROOT_PATH_BOTH | ONLY_CMAKE_FIND_ROOT_PATH | NO_CMAKE_FIND_ROOT_PATH])The CONFIG option may be used to skip Module mode explicitly and switch to Config mode. It is synonymous to using NO_MODULE. Config mode is also implied by use of options not specified in the reduced signature. Config mode attempts to locate a configuration file provided by the package to be found. A cache entry called <package>_DIR is created to hold the directory containing the file. By default the command searches for a package with the name <package>. If the NAMES option is given the names following it are used instead of <package>. The command searches for a file called "<name>Config.cmake" or "<lower−case−name>−config.cmake" for each name specified. A replacement set of possible configuration file names may be given using the CONFIGS option. The search procedure is specified below. Once found, the configuration file is read and processed by CMake. Since the file is provided by the package it already knows the location of package contents. The full path to the configuration file is stored in the cmake variable <package>_CONFIG. All configuration files which have been considered by CMake while searching for an installation of the package with an appropriate version are stored in the cmake variable <package>_CONSIDERED_CONFIGS, the associated versions in <package>_CONSIDERED_VERSIONS. If the package configuration file cannot be found CMake will generate an error describing the problem unless the QUIET argument is specified. If REQUIRED is specified and the package is not found a fatal error is generated and the configure step stops executing. If <package>_DIR has been set to a directory not containing a configuration file CMake will ignore it and search from scratch. When the [version] argument is given Config mode will only find a version of the package that claims compatibility with the requested version (format is major[.minor[.patch[.tweak]]]). If the EXACT option is given only a version of the package claiming an exact match of the requested version may be found. CMake does not establish any convention for the meaning of version numbers. Package version numbers are checked by "version" files provided by the packages themselves. For a candidate package configuration file "<config−file>.cmake" the corresponding version file is located next to it and named either "<config−file>−version.cmake" or "<config−file>Version.cmake". If no such version file is available then the configuration file is assumed to not be compatible with any requested version. A basic version file containing generic version matching code can be created using the macro write_basic_package_version_file(), see its documentation for more details. When a version file is found it is loaded to check the requested version number. The version file is loaded in a nested scope in which the following variables have been defined: PACKAGE_FIND_NAME = the <package> name PACKAGE_FIND_VERSION = full requested version string PACKAGE_FIND_VERSION_MAJOR = major version if requested, else 0 PACKAGE_FIND_VERSION_MINOR = minor version if requested, else 0 PACKAGE_FIND_VERSION_PATCH = patch version if requested, else 0 PACKAGE_FIND_VERSION_TWEAK = tweak version if requested, else 0 PACKAGE_FIND_VERSION_COUNT = number of version components, 0 to 4The version file checks whether it satisfies the requested version and sets these variables: PACKAGE_VERSION = full provided version string PACKAGE_VERSION_EXACT = true if version is exact match PACKAGE_VERSION_COMPATIBLE = true if version is compatible PACKAGE_VERSION_UNSUITABLE = true if unsuitable as any versionThese variables are checked by the find_package command to determine whether the configuration file provides an acceptable version. They are not available after the find_package call returns. If the version is acceptable the following variables are set: <package>_VERSION = full provided version string <package>_VERSION_MAJOR = major version if provided, else 0 <package>_VERSION_MINOR = minor version if provided, else 0 <package>_VERSION_PATCH = patch version if provided, else 0 <package>_VERSION_TWEAK = tweak version if provided, else 0 <package>_VERSION_COUNT = number of version components, 0 to 4and the corresponding package configuration file is loaded. When multiple package configuration files are available whose version files claim compatibility with the version requested it is unspecified which one is chosen. No attempt is made to choose a highest or closest version number. Config mode provides an elaborate interface and search procedure. Much of the interface is provided for completeness and for use internally by find−modules loaded by Module mode. Most user code should simply call find_package(<package> [major[.minor]] [EXACT] [REQUIRED|QUIET])in order to find a package. Package maintainers providing CMake package configuration files are encouraged to name and install them such that the procedure outlined below will find them without requiring use of additional options. CMake constructs a set of possible installation prefixes for the package. Under each prefix several directories are searched for a configuration file. The tables below show the directories searched. Each entry is meant for installation trees following Windows (W), UNIX (U), or Apple (A) conventions. <prefix>/ (W) <prefix>/(cmake|CMake)/ (W) <prefix>/<name>*/ (W) <prefix>/<name>*/(cmake|CMake)/ (W) <prefix>/(lib/<arch>|lib|share)/cmake/<name>*/ (U) <prefix>/(lib/<arch>|lib|share)/<name>*/ (U) <prefix>/(lib/<arch>|lib|share)/<name>*/(cmake|CMake)/ (U)On systems supporting OS X Frameworks and Application Bundles the following directories are searched for frameworks or bundles containing a configuration file: <prefix>/<name>.framework/Resources/ (A) <prefix>/<name>.framework/Resources/CMake/ (A) <prefix>/<name>.framework/Versions/*/Resources/ (A) <prefix>/<name>.framework/Versions/*/Resources/CMake/ (A) <prefix>/<name>.app/Contents/Resources/ (A) <prefix>/<name>.app/Contents/Resources/CMake/ (A)In all cases the <name> is treated as case−insensitive and corresponds to any of the names specified (<package> or names given by NAMES). Paths with lib/<arch> are enabled if CMAKE_LIBRARY_ARCHITECTURE is set. If PATH_SUFFIXES is specified the suffixes are appended to each (W) or (U) directory entry one−by−one. This set of directories is intended to work in cooperation with projects that provide configuration files in their installation trees. Directories above marked with (W) are intended for installations on Windows where the prefix may point at the top of an application's installation directory. Those marked with (U) are intended for installations on UNIX platforms where the prefix is shared by multiple packages. This is merely a convention, so all (W) and (U) directories are still searched on all platforms. Directories marked with (A) are intended for installations on Apple platforms. The cmake variables CMAKE_FIND_FRAMEWORK and CMAKE_FIND_APPBUNDLE determine the order of preference as specified below. The set of installation prefixes is constructed using the following steps. If NO_DEFAULT_PATH is specified all NO_* options are enabled. 1. Search paths specified in cmake−specific cache variables. These are intended to be used on the command line with a −DVAR=value. This can be skipped if NO_CMAKE_PATH is passed. CMAKE_PREFIX_PATH CMAKE_FRAMEWORK_PATH CMAKE_APPBUNDLE_PATH2. Search paths specified in cmake−specific environment variables. These are intended to be set in the user's shell configuration. This can be skipped if NO_CMAKE_ENVIRONMENT_PATH is passed. <package>_DIR CMAKE_PREFIX_PATH CMAKE_FRAMEWORK_PATH CMAKE_APPBUNDLE_PATH3. Search paths specified by the HINTS option. These should be paths computed by system introspection, such as a hint provided by the location of another item already found. Hard−coded guesses should be specified with the PATHS option. 4. Search the standard system environment variables. This can be skipped if NO_SYSTEM_ENVIRONMENT_PATH is passed. Path entries ending in "/bin" or "/sbin" are automatically converted to their parent directories. PATH5. Search project build trees recently configured in a CMake GUI. This can be skipped if NO_CMAKE_BUILDS_PATH is passed. It is intended for the case when a user is building multiple dependent projects one after another. 6. Search paths stored in the CMake user package registry. This can be skipped if NO_CMAKE_PACKAGE_REGISTRY is passed. On Windows a <package> may appear under registry key HKEY_CURRENT_USER\Software\\Kitware\\CMake\\Packages\\<package>as a REG_SZ value, with arbitrary name, that specifies the directory containing the package configuration file. On UNIX platforms a <package> may appear under the directory ~/.cmake/packages/<package>as a file, with arbitrary name, whose content specifies the directory containing the package configuration file. See the export(PACKAGE) command to create user package registry entries for project build trees. 7. Search cmake variables defined in the Platform files for the current system. This can be skipped if NO_CMAKE_SYSTEM_PATH is passed. CMAKE_SYSTEM_PREFIX_PATH CMAKE_SYSTEM_FRAMEWORK_PATH CMAKE_SYSTEM_APPBUNDLE_PATH8. Search paths stored in the CMake system package registry. This can be skipped if NO_CMAKE_SYSTEM_PACKAGE_REGISTRY is passed. On Windows a <package> may appear under registry key HKEY_LOCAL_MACHINE\Software\\Kitware\\CMake\\Packages\\<package>as a REG_SZ value, with arbitrary name, that specifies the directory containing the package configuration file. There is no system package registry on non−Windows platforms. 9. Search paths specified by the PATHS option. These are typically hard−coded guesses. On Darwin or systems supporting OS X Frameworks, the cmake variable CMAKE_FIND_FRAMEWORK can be set to empty or one of the following: "FIRST" − Try to find frameworks before standard libraries or headers. This is the default on Darwin. "LAST" − Try to find frameworks after standard libraries or headers. "ONLY" − Only try to find frameworks. "NEVER" − Never try to find frameworks.On Darwin or systems supporting OS X Application Bundles, the cmake variable CMAKE_FIND_APPBUNDLE can be set to empty or one of the following: "FIRST" − Try to find application bundles before standard programs. This is the default on Darwin. "LAST" − Try to find application bundles after standard programs. "ONLY" − Only try to find application bundles. "NEVER" − Never try to find application bundles.The CMake variable CMAKE_FIND_ROOT_PATH specifies one or more directories to be prepended to all other search directories. This effectively "re−roots" the entire search under given locations. By default it is empty. It is especially useful when cross−compiling to point to the root directory of the target environment and CMake will search there too. By default at first the directories listed in CMAKE_FIND_ROOT_PATH and then the non−rooted directories will be searched. The default behavior can be adjusted by setting CMAKE_FIND_ROOT_PATH_MODE_PACKAGE. This behavior can be manually overridden on a per−call basis. By using CMAKE_FIND_ROOT_PATH_BOTH the search order will be as described above. If NO_CMAKE_FIND_ROOT_PATH is used then CMAKE_FIND_ROOT_PATH will not be used. If ONLY_CMAKE_FIND_ROOT_PATH is used then only the re−rooted directories will be searched. The default search order is designed to be most−specific to least−specific for common use cases. Projects may override the order by simply calling the command multiple times and using the NO_* options: find_package(<package> PATHS paths... NO_DEFAULT_PATH) find_package(<package>)Once one of the calls succeeds the result variable will be set and stored in the cache so that no call will search again. Every non−REQUIRED find_package() call can be disabled by setting the variable CMAKE_DISABLE_FIND_PACKAGE_<package> to TRUE. See the documentation for the CMAKE_DISABLE_FIND_PACKAGE_<package> variable for more information. When loading a find module or package configuration file find_package defines variables to provide information about the call arguments (and restores their original state before returning): <package>_FIND_REQUIRED = true if REQUIRED option was given <package>_FIND_QUIETLY = true if QUIET option was given <package>_FIND_VERSION = full requested version string <package>_FIND_VERSION_MAJOR = major version if requested, else 0 <package>_FIND_VERSION_MINOR = minor version if requested, else 0 <package>_FIND_VERSION_PATCH = patch version if requested, else 0 <package>_FIND_VERSION_TWEAK = tweak version if requested, else 0 <package>_FIND_VERSION_COUNT = number of version components, 0 to 4 <package>_FIND_VERSION_EXACT = true if EXACT option was given <package>_FIND_COMPONENTS = list of requested components <package>_FIND_REQUIRED_<c> = true if component <c> is required false if component <c> is optionalIn Module mode the loaded find module is responsible to honor the request detailed by these variables; see the find module for details. In Config mode find_package handles REQUIRED, QUIET, and version options automatically but leaves it to the package configuration file to handle components in a way that makes sense for the package. The package configuration file may set <package>_FOUND to false to tell find_package that component requirements are not satisfied. See the cmake_policy() command documentation for discussion of the NO_POLICY_SCOPE option. find_path  Find the directory containing a file. find_path(<VAR> name1 [path1 path2 ...])This is the short−hand signature for the command that is sufficient in many cases. It is the same as find_path(<VAR> name1 [PATHS path1 path2 ...]) find_path( <VAR> name | NAMES name1 [name2 ...] [HINTS path1 [path2 ... ENV var]] [PATHS path1 [path2 ... ENV var]] [PATH_SUFFIXES suffix1 [suffix2 ...]] [DOC "cache documentation string"] [NO_DEFAULT_PATH] [NO_CMAKE_ENVIRONMENT_PATH] [NO_CMAKE_PATH] [NO_SYSTEM_ENVIRONMENT_PATH] [NO_CMAKE_SYSTEM_PATH] [CMAKE_FIND_ROOT_PATH_BOTH | ONLY_CMAKE_FIND_ROOT_PATH | NO_CMAKE_FIND_ROOT_PATH] )This command is used to find a directory containing the named file. A cache entry named by <VAR> is created to store the result of this command. If the file in a directory is found the result is stored in the variable and the search will not be repeated unless the variable is cleared. If nothing is found, the result will be <VAR>−NOTFOUND, and the search will be attempted again the next time find_path is invoked with the same variable. The name of the file in a directory that is searched for is specified by the names listed after the NAMES argument. Additional search locations can be specified after the PATHS argument. If ENV var is found in the HINTS or PATHS section the environment variable var will be read and converted from a system environment variable to a cmake style list of paths. For example ENV PATH would be a way to list the system path variable. The argument after DOC will be used for the documentation string in the cache. PATH_SUFFIXES specifies additional subdirectories to check below each search path. If NO_DEFAULT_PATH is specified, then no additional paths are added to the search. If NO_DEFAULT_PATH is not specified, the search process is as follows: 1. Search paths specified in cmake−specific cache variables. These are intended to be used on the command line with a −DVAR=value. This can be skipped if NO_CMAKE_PATH is passed. <prefix>/include/<arch> if CMAKE_LIBRARY_ARCHITECTURE is set, and <prefix>/include for each <prefix> in CMAKE_PREFIX_PATH CMAKE_INCLUDE_PATH CMAKE_FRAMEWORK_PATH2. Search paths specified in cmake−specific environment variables. These are intended to be set in the user's shell configuration. This can be skipped if NO_CMAKE_ENVIRONMENT_PATH is passed. <prefix>/include/<arch> if CMAKE_LIBRARY_ARCHITECTURE is set, and <prefix>/include for each <prefix> in CMAKE_PREFIX_PATH CMAKE_INCLUDE_PATH CMAKE_FRAMEWORK_PATH3. Search the paths specified by the HINTS option. These should be paths computed by system introspection, such as a hint provided by the location of another item already found. Hard−coded guesses should be specified with the PATHS option. 4. Search the standard system environment variables. This can be skipped if NO_SYSTEM_ENVIRONMENT_PATH is an argument. PATH INCLUDE5. Search cmake variables defined in the Platform files for the current system. This can be skipped if NO_CMAKE_SYSTEM_PATH is passed. <prefix>/include/<arch> if CMAKE_LIBRARY_ARCHITECTURE is set, and <prefix>/include for each <prefix> in CMAKE_SYSTEM_PREFIX_PATH CMAKE_SYSTEM_INCLUDE_PATH CMAKE_SYSTEM_FRAMEWORK_PATH6. Search the paths specified by the PATHS option or in the short−hand version of the command. These are typically hard−coded guesses. On Darwin or systems supporting OS X Frameworks, the cmake variable CMAKE_FIND_FRAMEWORK can be set to empty or one of the following: "FIRST" − Try to find frameworks before standard libraries or headers. This is the default on Darwin. "LAST" − Try to find frameworks after standard libraries or headers. "ONLY" − Only try to find frameworks. "NEVER" − Never try to find frameworks.On Darwin or systems supporting OS X Application Bundles, the cmake variable CMAKE_FIND_APPBUNDLE can be set to empty or one of the following: "FIRST" − Try to find application bundles before standard programs. This is the default on Darwin. "LAST" − Try to find application bundles after standard programs. "ONLY" − Only try to find application bundles. "NEVER" − Never try to find application bundles.The CMake variable CMAKE_FIND_ROOT_PATH specifies one or more directories to be prepended to all other search directories. This effectively "re−roots" the entire search under given locations. By default it is empty. It is especially useful when cross−compiling to point to the root directory of the target environment and CMake will search there too. By default at first the directories listed in CMAKE_FIND_ROOT_PATH and then the non−rooted directories will be searched. The default behavior can be adjusted by setting CMAKE_FIND_ROOT_PATH_MODE_INCLUDE. This behavior can be manually overridden on a per−call basis. By using CMAKE_FIND_ROOT_PATH_BOTH the search order will be as described above. If NO_CMAKE_FIND_ROOT_PATH is used then CMAKE_FIND_ROOT_PATH will not be used. If ONLY_CMAKE_FIND_ROOT_PATH is used then only the re−rooted directories will be searched. The default search order is designed to be most−specific to least−specific for common use cases. Projects may override the order by simply calling the command multiple times and using the NO_* options: find_path(<VAR> NAMES name PATHS paths... NO_DEFAULT_PATH) find_path(<VAR> NAMES name)Once one of the calls succeeds the result variable will be set and stored in the cache so that no call will search again. When searching for frameworks, if the file is specified as A/b.h, then the framework search will look for A.framework/Headers/b.h. If that is found the path will be set to the path to the framework. CMake will convert this to the correct −F option to include the file. find_program  Find an executable program. find_program(<VAR> name1 [path1 path2 ...])This is the short−hand signature for the command that is sufficient in many cases. It is the same as find_program(<VAR> name1 [PATHS path1 path2 ...]) find_program( <VAR> name | NAMES name1 [name2 ...] [HINTS path1 [path2 ... ENV var]] [PATHS path1 [path2 ... ENV var]] [PATH_SUFFIXES suffix1 [suffix2 ...]] [DOC "cache documentation string"] [NO_DEFAULT_PATH] [NO_CMAKE_ENVIRONMENT_PATH] [NO_CMAKE_PATH] [NO_SYSTEM_ENVIRONMENT_PATH] [NO_CMAKE_SYSTEM_PATH] [CMAKE_FIND_ROOT_PATH_BOTH | ONLY_CMAKE_FIND_ROOT_PATH | NO_CMAKE_FIND_ROOT_PATH] )This command is used to find a program. A cache entry named by <VAR> is created to store the result of this command. If the program is found the result is stored in the variable and the search will not be repeated unless the variable is cleared. If nothing is found, the result will be <VAR>−NOTFOUND, and the search will be attempted again the next time find_program is invoked with the same variable. The name of the program that is searched for is specified by the names listed after the NAMES argument. Additional search locations can be specified after the PATHS argument. If ENV var is found in the HINTS or PATHS section the environment variable var will be read and converted from a system environment variable to a cmake style list of paths. For example ENV PATH would be a way to list the system path variable. The argument after DOC will be used for the documentation string in the cache. PATH_SUFFIXES specifies additional subdirectories to check below each search path. If NO_DEFAULT_PATH is specified, then no additional paths are added to the search. If NO_DEFAULT_PATH is not specified, the search process is as follows: 1. Search paths specified in cmake−specific cache variables. These are intended to be used on the command line with a −DVAR=value. This can be skipped if NO_CMAKE_PATH is passed. <prefix>/[s]bin for each <prefix> in CMAKE_PREFIX_PATH CMAKE_PROGRAM_PATH CMAKE_APPBUNDLE_PATH2. Search paths specified in cmake−specific environment variables. These are intended to be set in the user's shell configuration. This can be skipped if NO_CMAKE_ENVIRONMENT_PATH is passed. <prefix>/[s]bin for each <prefix> in CMAKE_PREFIX_PATH CMAKE_PROGRAM_PATH CMAKE_APPBUNDLE_PATH3. Search the paths specified by the HINTS option. These should be paths computed by system introspection, such as a hint provided by the location of another item already found. Hard−coded guesses should be specified with the PATHS option. 4. Search the standard system environment variables. This can be skipped if NO_SYSTEM_ENVIRONMENT_PATH is an argument. PATH 5. Search cmake variables defined in the Platform files for the current system. This can be skipped if NO_CMAKE_SYSTEM_PATH is passed. <prefix>/[s]bin for each <prefix> in CMAKE_SYSTEM_PREFIX_PATH CMAKE_SYSTEM_PROGRAM_PATH CMAKE_SYSTEM_APPBUNDLE_PATH6. Search the paths specified by the PATHS option or in the short−hand version of the command. These are typically hard−coded guesses. On Darwin or systems supporting OS X Frameworks, the cmake variable CMAKE_FIND_FRAMEWORK can be set to empty or one of the following: "FIRST" − Try to find frameworks before standard libraries or headers. This is the default on Darwin. "LAST" − Try to find frameworks after standard libraries or headers. "ONLY" − Only try to find frameworks. "NEVER" − Never try to find frameworks.On Darwin or systems supporting OS X Application Bundles, the cmake variable CMAKE_FIND_APPBUNDLE can be set to empty or one of the following: "FIRST" − Try to find application bundles before standard programs. This is the default on Darwin. "LAST" − Try to find application bundles after standard programs. "ONLY" − Only try to find application bundles. "NEVER" − Never try to find application bundles.The CMake variable CMAKE_FIND_ROOT_PATH specifies one or more directories to be prepended to all other search directories. This effectively "re−roots" the entire search under given locations. By default it is empty. It is especially useful when cross−compiling to point to the root directory of the target environment and CMake will search there too. By default at first the directories listed in CMAKE_FIND_ROOT_PATH and then the non−rooted directories will be searched. The default behavior can be adjusted by setting CMAKE_FIND_ROOT_PATH_MODE_PROGRAM. This behavior can be manually overridden on a per−call basis. By using CMAKE_FIND_ROOT_PATH_BOTH the search order will be as described above. If NO_CMAKE_FIND_ROOT_PATH is used then CMAKE_FIND_ROOT_PATH will not be used. If ONLY_CMAKE_FIND_ROOT_PATH is used then only the re−rooted directories will be searched. The default search order is designed to be most−specific to least−specific for common use cases. Projects may override the order by simply calling the command multiple times and using the NO_* options: find_program(<VAR> NAMES name PATHS paths... NO_DEFAULT_PATH) find_program(<VAR> NAMES name)Once one of the calls succeeds the result variable will be set and stored in the cache so that no call will search again. fltk_wrap_ui  Create FLTK user interfaces Wrappers. fltk_wrap_ui(resultingLibraryName source1 source2 ... sourceN )Produce .h and .cxx files for all the .fl and .fld files listed. The resulting .h and .cxx files will be added to a variable named resultingLibraryName_FLTK_UI_SRCS which should be added to your library. foreach  Evaluate a group of commands for each value in a list. foreach(loop_var arg1 arg2 ...) COMMAND1(ARGS ...) COMMAND2(ARGS ...) ... endforeach(loop_var)All commands between foreach and the matching endforeach are recorded without being invoked. Once the endforeach is evaluated, the recorded list of commands is invoked once for each argument listed in the original foreach command. Before each iteration of the loop "${loop_var}" will be set as a variable with the current value in the list. foreach(loop_var RANGE total) foreach(loop_var RANGE start stop [step])Foreach can also iterate over a generated range of numbers. There are three types of this iteration: * When specifying single number, the range will have elements 0 to "total". * When specifying two numbers, the range will have elements from the first number to the second number. * The third optional number is the increment used to iterate from the first number to the second number. foreach(loop_var IN [LISTS [list1 [...]]] [ITEMS [item1 [...]]])Iterates over a precise list of items. The LISTS option names list−valued variables to be traversed, including empty elements (an empty string is a zero−length list). The ITEMS option ends argument parsing and includes all arguments following it in the iteration. function  Start recording a function for later invocation as a command. function(<name> [arg1 [arg2 [arg3 ...]]]) COMMAND1(ARGS ...) COMMAND2(ARGS ...) ... endfunction(<name>)Define a function named <name> that takes arguments named arg1 arg2 arg3 (...). Commands listed after function, but before the matching endfunction, are not invoked until the function is invoked. When it is invoked, the commands recorded in the function are first modified by replacing formal parameters (${arg1}) with the arguments passed, and then invoked as normal commands. In addition to referencing the formal parameters you can reference the variable ARGC which will be set to the number of arguments passed into the function as well as ARGV0 ARGV1 ARGV2 ... which will have the actual values of the arguments passed in. This facilitates creating functions with optional arguments. Additionally ARGV holds the list of all arguments given to the function and ARGN holds the list of arguments past the last expected argument. A function opens a new scope: see set(var PARENT_SCOPE) for details. See the cmake_policy() command documentation for the behavior of policies inside functions. get_cmake_property  Get a property of the CMake instance. get_cmake_property(VAR property)Get a property from the CMake instance. The value of the property is stored in the variable VAR. If the property is not found, VAR will be set to "NOTFOUND". Some supported properties include: VARIABLES, CACHE_VARIABLES, COMMANDS, MACROS, and COMPONENTS. See also the more general get_property() command. get_directory_property  Get a property of DIRECTORY scope. get_directory_property(<variable> [DIRECTORY <dir>] <prop−name>)Store a property of directory scope in the named variable. If the property is not defined the empty−string is returned. The DIRECTORY argument specifies another directory from which to retrieve the property value. The specified directory must have already been traversed by CMake. get_directory_property(<variable> [DIRECTORY <dir>] DEFINITION <var−name>)Get a variable definition from a directory. This form is useful to get a variable definition from another directory. See also the more general get_property() command. get_filename_component  Get a specific component of a full filename. get_filename_component(<VAR> <FileName> <COMP> [CACHE])Set <VAR> to a component of <FileName>, where <COMP> is one of: DIRECTORY = Directory without file name NAME = File name without directory EXT = File name longest extension (.b.c from d/a.b.c) NAME_WE = File name without directory or longest extension ABSOLUTE = Full path to file REALPATH = Full path to existing file with symlinks resolved PATH = Legacy alias for DIRECTORY (use for CMake <= 2.8.11)Paths are returned with forward slashes and have no trailing slahes. The longest file extension is always considered. If the optional CACHE argument is specified, the result variable is added to the cache. get_filename_component(<VAR> FileName PROGRAM [PROGRAM_ARGS <ARG_VAR>] [CACHE])The program in FileName will be found in the system search path or left as a full path. If PROGRAM_ARGS is present with PROGRAM, then any command−line arguments present in the FileName string are split from the program name and stored in <ARG_VAR>. This is used to separate a program name from its arguments in a command line string. get_property  Get a property. get_property(<variable> <GLOBAL | DIRECTORY [dir] | TARGET <target> | SOURCE <source> | TEST <test> | CACHE <entry> | VARIABLE> PROPERTY <name> [SET | DEFINED | BRIEF_DOCS | FULL_DOCS])Get one property from one object in a scope. The first argument specifies the variable in which to store the result. The second argument determines the scope from which to get the property. It must be one of the following: GLOBAL scope is unique and does not accept a name. DIRECTORY scope defaults to the current directory but another directory (already processed by CMake) may be named by full or relative path. TARGET scope must name one existing target. SOURCE scope must name one source file. TEST scope must name one existing test. CACHE scope must name one cache entry. VARIABLE scope is unique and does not accept a name. The required PROPERTY option is immediately followed by the name of the property to get. If the property is not set an empty value is returned. If the SET option is given the variable is set to a boolean value indicating whether the property has been set. If the DEFINED option is given the variable is set to a boolean value indicating whether the property has been defined such as with define_property. If BRIEF_DOCS or FULL_DOCS is given then the variable is set to a string containing documentation for the requested property. If documentation is requested for a property that has not been defined NOTFOUND is returned. get_source_file_property  Get a property for a source file. get_source_file_property(VAR file property)Get a property from a source file. The value of the property is stored in the variable VAR. If the property is not found, VAR will be set to "NOTFOUND". Use set_source_files_properties to set property values. Source file properties usually control how the file is built. One property that is always there is LOCATION See also the more general get_property() command. get_target_property  Get a property from a target. get_target_property(VAR target property)Get a property from a target. The value of the property is stored in the variable VAR. If the property is not found, VAR will be set to "NOTFOUND". Use set_target_properties to set property values. Properties are usually used to control how a target is built, but some query the target instead. This command can get properties for any target so far created. The targets do not need to be in the current CMakeLists.txt file. See also the more general get_property() command. get_test_property  Get a property of the test. get_test_property(test property VAR)Get a property from the Test. The value of the property is stored in the variable VAR. If the property is not found, VAR will be set to "NOTFOUND". For a list of standard properties you can type cmake −−help−property−list See also the more general get_property() command. if  Conditionally execute a group of commands. if(expression) # then section. COMMAND1(ARGS ...) COMMAND2(ARGS ...) ... elseif(expression2) # elseif section. COMMAND1(ARGS ...) COMMAND2(ARGS ...) ... else(expression) # else section. COMMAND1(ARGS ...) COMMAND2(ARGS ...) ... endif(expression)Evaluates the given expression. If the result is true, the commands in the THEN section are invoked. Otherwise, the commands in the else section are invoked. The elseif and else sections are optional. You may have multiple elseif clauses. Note that the expression in the else and endif clause is optional. Long expressions can be used and there is a traditional order of precedence. Parenthetical expressions are evaluated first followed by unary operators such as EXISTS, COMMAND, and DEFINED. Then any EQUAL, LESS, GREATER, STRLESS, STRGREATER, STREQUAL, MATCHES will be evaluated. Then NOT operators and finally AND, OR operators will be evaluated. Possible expressions are: if(<constant>)True if the constant is 1, ON, YES, TRUE, Y, or a non−zero number. False if the constant is 0, OFF, NO, FALSE, N, IGNORE, NOTFOUND, '', or ends in the suffix '−NOTFOUND'. Named boolean constants are case−insensitive. If the argument is not one of these constants, it is treated as a variable: if(<variable>)True if the variable is defined to a value that is not a false constant. False otherwise. (Note macro arguments are not variables.) if(NOT <expression>)True if the expression is not true. if(<expr1> AND <expr2>)True if both expressions would be considered true individually. if(<expr1> OR <expr2>)True if either expression would be considered true individually. if(COMMAND command−name)True if the given name is a command, macro or function that can be invoked. if(POLICY policy−id)True if the given name is an existing policy (of the form CMP<NNNN>). if(TARGET target−name)True if the given name is an existing target, built or imported. if(EXISTS file−name) if(EXISTS directory−name)True if the named file or directory exists. Behavior is well−defined only for full paths. if(file1 IS_NEWER_THAN file2)True if file1 is newer than file2 or if one of the two files doesn't exist. Behavior is well−defined only for full paths. If the file time stamps are exactly the same, an IS_NEWER_THAN comparison returns true, so that any dependent build operations will occur in the event of a tie. This includes the case of passing the same file name for both file1 and file2. if(IS_DIRECTORY directory−name)True if the given name is a directory. Behavior is well−defined only for full paths. if(IS_SYMLINK file−name)True if the given name is a symbolic link. Behavior is well−defined only for full paths. if(IS_ABSOLUTE path)True if the given path is an absolute path. if(<variable|string> MATCHES regex)True if the given string or variable's value matches the given regular expression. if(<variable|string> LESS <variable|string>) if(<variable|string> GREATER <variable|string>) if(<variable|string> EQUAL <variable|string>)True if the given string or variable's value is a valid number and the inequality or equality is true. if(<variable|string> STRLESS <variable|string>) if(<variable|string> STRGREATER <variable|string>) if(<variable|string> STREQUAL <variable|string>)True if the given string or variable's value is lexicographically less (or greater, or equal) than the string or variable on the right. if(<variable|string> VERSION_LESS <variable|string>) if(<variable|string> VERSION_EQUAL <variable|string>) if(<variable|string> VERSION_GREATER <variable|string>)Component−wise integer version number comparison (version format is major[.minor[.patch[.tweak]]]). if(DEFINED <variable>)True if the given variable is defined. It does not matter if the variable is true or false just if it has been set. if((expression) AND (expression OR (expression)))The expressions inside the parenthesis are evaluated first and then the remaining expression is evaluated as in the previous examples. Where there are nested parenthesis the innermost are evaluated as part of evaluating the expression that contains them. The if command was written very early in CMake's history, predating the ${} variable evaluation syntax, and for convenience evaluates variables named by its arguments as shown in the above signatures. Note that normal variable evaluation with ${} applies before the if command even receives the arguments. Therefore code like set(var1 OFF) set(var2 "var1") if(${var2})appears to the if command as if(var1)and is evaluated according to the if(<variable>) case documented above. The result is OFF which is false. However, if we remove the ${} from the example then the command sees if(var2)which is true because var2 is defined to "var1" which is not a false constant. Automatic evaluation applies in the other cases whenever the above−documented signature accepts <variable|string>: 1) The left hand argument to MATCHES is first checked to see if it is a defined variable, if so the variable's value is used, otherwise the original value is used. 2) If the left hand argument to MATCHES is missing it returns false without error 3) Both left and right hand arguments to LESS GREATER EQUAL are independently tested to see if they are defined variables, if so their defined values are used otherwise the original value is used. 4) Both left and right hand arguments to STRLESS STREQUAL STRGREATER are independently tested to see if they are defined variables, if so their defined values are used otherwise the original value is used. 5) Both left and right hand argumemnts to VERSION_LESS VERSION_EQUAL VERSION_GREATER are independently tested to see if they are defined variables, if so their defined values are used otherwise the original value is used. 6) The right hand argument to NOT is tested to see if it is a boolean constant, if so the value is used, otherwise it is assumed to be a variable and it is dereferenced. 7) The left and right hand arguments to AND OR are independently tested to see if they are boolean constants, if so they are used as such, otherwise they are assumed to be variables and are dereferenced. include  Load and run CMake code from a file or module. include(<file|module> [OPTIONAL] [RESULT_VARIABLE <VAR>] [NO_POLICY_SCOPE])Load and run CMake code from the file given. Variable reads and writes access the scope of the caller (dynamic scoping). If OPTIONAL is present, then no error is raised if the file does not exist. If RESULT_VARIABLE is given the variable will be set to the full filename which has been included or NOTFOUND if it failed. If a module is specified instead of a file, the file with name <modulename>.cmake is searched first in CMAKE_MODULE_PATH, then in the CMake module directory. There is one exception to this: if the file which calls include() is located itself in the CMake module directory, then first the CMake module directory is searched and CMAKE_MODULE_PATH afterwards. See also policy CMP0017. See the cmake_policy() command documentation for discussion of the NO_POLICY_SCOPE option. include_directories  Add include directories to the build. include_directories([AFTER|BEFORE] [SYSTEM] dir1 dir2 ...)Add the given directories to those the compiler uses to search for include files. Relative paths are interpreted as relative to the current source directory. The include directories are added to the directory property INCLUDE_DIRECTORIES for the current CMakeLists file. They are also added to the target property INCLUDE_DIRECTORIES for each target in the current CMakeLists file. The target property values are the ones used by the generators. By default the directories are appended onto the current list of directories. This default behavior can be changed by setting CMAKE_INCLUDE_DIRECTORIES_BEFORE to ON. By using AFTER or BEFORE explicitly, you can select between appending and prepending, independent of the default. If the SYSTEM option is given, the compiler will be told the directories are meant as system include directories on some platforms (signalling this setting might achieve effects such as the compiler skipping warnings, or these fixed−install system files not being considered in dependency calculations − see compiler docs). include_external_msproject  Include an external Microsoft project file in a workspace. include_external_msproject(projectname location [TYPE projectTypeGUID] [GUID projectGUID] [PLATFORM platformName] dep1 dep2 ...)Includes an external Microsoft project in the generated workspace file. Currently does nothing on UNIX. This will create a target named [projectname]. This can be used in the add_dependencies command to make things depend on the external project. TYPE, GUID and PLATFORM are optional parameters that allow one to specify the type of project, id (GUID) of the project and the name of the target platform. This is useful for projects requiring values other than the default (e.g. WIX projects). These options are not supported by the Visual Studio 6 generator. include_regular_expression  Set the regular expression used for dependency checking. include_regular_expression(regex_match [regex_complain])Set the regular expressions used in dependency checking. Only files matching regex_match will be traced as dependencies. Only files matching regex_complain will generate warnings if they cannot be found (standard header paths are not searched). The defaults are: regex_match = "^.*$" (match everything) regex_complain = "^$" (match empty string only)install  Specify rules to run at install time. This command generates installation rules for a project. Rules specified by calls to this command within a source directory are executed in order during installation. The order across directories is not defined. There are multiple signatures for this command. Some of them define installation properties for files and targets. Properties common to multiple signatures are covered here but they are valid only for signatures that specify them. DESTINATION arguments specify the directory on disk to which a file will be installed. If a full path (with a leading slash or drive letter) is given it is used directly. If a relative path is given it is interpreted relative to the value of CMAKE_INSTALL_PREFIX. The prefix can be relocated at install time using DESTDIR mechanism explained in the CMAKE_INSTALL_PREFIX variable documentation. PERMISSIONS arguments specify permissions for installed files. Valid permissions are OWNER_READ, OWNER_WRITE, OWNER_EXECUTE, GROUP_READ, GROUP_WRITE, GROUP_EXECUTE, WORLD_READ, WORLD_WRITE, WORLD_EXECUTE, SETUID, and SETGID. Permissions that do not make sense on certain platforms are ignored on those platforms. The CONFIGURATIONS argument specifies a list of build configurations for which the install rule applies (Debug, Release, etc.). The COMPONENT argument specifies an installation component name with which the install rule is associated, such as "runtime" or "development". During component−specific installation only install rules associated with the given component name will be executed. During a full installation all components are installed. If COMPONENT is not provided a default component "Unspecified" is created. The default component name may be controlled with the CMAKE_INSTALL_DEFAULT_COMPONENT_NAME variable. The RENAME argument specifies a name for an installed file that may be different from the original file. Renaming is allowed only when a single file is installed by the command. The OPTIONAL argument specifies that it is not an error if the file to be installed does not exist. The TARGETS signature: install(TARGETS targets... [EXPORT <export−name>] [[ARCHIVE|LIBRARY|RUNTIME|FRAMEWORK|BUNDLE| PRIVATE_HEADER|PUBLIC_HEADER|RESOURCE] [DESTINATION <dir>] [INCLUDES DESTINATION [<dir> ...]] [PERMISSIONS permissions...] [CONFIGURATIONS [Debug|Release|...]] [COMPONENT <component>] [OPTIONAL] [NAMELINK_ONLY|NAMELINK_SKIP] ] [...])The TARGETS form specifies rules for installing targets from a project. There are five kinds of target files that may be installed: ARCHIVE, LIBRARY, RUNTIME, FRAMEWORK, and BUNDLE. Executables are treated as RUNTIME targets, except that those marked with the MACOSX_BUNDLE property are treated as BUNDLE targets on OS X. Static libraries are always treated as ARCHIVE targets. Module libraries are always treated as LIBRARY targets. For non−DLL platforms shared libraries are treated as LIBRARY targets, except that those marked with the FRAMEWORK property are treated as FRAMEWORK targets on OS X. For DLL platforms the DLL part of a shared library is treated as a RUNTIME target and the corresponding import library is treated as an ARCHIVE target. All Windows−based systems including Cygwin are DLL platforms. The ARCHIVE, LIBRARY, RUNTIME, and FRAMEWORK arguments change the type of target to which the subsequent properties apply. If none is given the installation properties apply to all target types. If only one is given then only targets of that type will be installed (which can be used to install just a DLL or just an import library).The INCLUDES DESTINATION specifies a list of directories which will be added to the INTERFACE_INCLUDE_DIRECTORIES of the <targets> when exported by install(EXPORT). If a relative path is specified, it is treated as relative to the $<INSTALL_PREFIX>. The PRIVATE_HEADER, PUBLIC_HEADER, and RESOURCE arguments cause subsequent properties to be applied to installing a FRAMEWORK shared library target's associated files on non−Apple platforms. Rules defined by these arguments are ignored on Apple platforms because the associated files are installed into the appropriate locations inside the framework folder. See documentation of the PRIVATE_HEADER, PUBLIC_HEADER, and RESOURCE target properties for details. Either NAMELINK_ONLY or NAMELINK_SKIP may be specified as a LIBRARY option. On some platforms a versioned shared library has a symbolic link such as lib<name>.so −> lib<name>.so.1where "lib<name>.so.1" is the soname of the library and "lib<name>.so" is a "namelink" allowing linkers to find the library when given "−l<name>". The NAMELINK_ONLY option causes installation of only the namelink when a library target is installed. The NAMELINK_SKIP option causes installation of library files other than the namelink when a library target is installed. When neither option is given both portions are installed. On platforms where versioned shared libraries do not have namelinks or when a library is not versioned the NAMELINK_SKIP option installs the library and the NAMELINK_ONLY option installs nothing. See the VERSION and SOVERSION target properties for details on creating versioned shared libraries. One or more groups of properties may be specified in a single call to the TARGETS form of this command. A target may be installed more than once to different locations. Consider hypothetical targets "myExe", "mySharedLib", and "myStaticLib". The code install(TARGETS myExe mySharedLib myStaticLib RUNTIME DESTINATION bin LIBRARY DESTINATION lib ARCHIVE DESTINATION lib/static) install(TARGETS mySharedLib DESTINATION /some/full/path)will install myExe to <prefix>/bin and myStaticLib to <prefix>/lib/static. On non−DLL platforms mySharedLib will be installed to <prefix>/lib and /some/full/path. On DLL platforms the mySharedLib DLL will be installed to <prefix>/bin and /some/full/path and its import library will be installed to <prefix>/lib/static and /some/full/path. The EXPORT option associates the installed target files with an export called <export−name>. It must appear before any RUNTIME, LIBRARY, or ARCHIVE options. To actually install the export file itself, call install(EXPORT). See documentation of the install(EXPORT ...) signature below for details. Installing a target with EXCLUDE_FROM_ALL set to true has undefined behavior. The FILES signature: install(FILES files... DESTINATION <dir> [PERMISSIONS permissions...] [CONFIGURATIONS [Debug|Release|...]] [COMPONENT <component>] [RENAME <name>] [OPTIONAL])The FILES form specifies rules for installing files for a project. File names given as relative paths are interpreted with respect to the current source directory. Files installed by this form are by default given permissions OWNER_WRITE, OWNER_READ, GROUP_READ, and WORLD_READ if no PERMISSIONS argument is given. The PROGRAMS signature: install(PROGRAMS files... DESTINATION <dir> [PERMISSIONS permissions...] [CONFIGURATIONS [Debug|Release|...]] [COMPONENT <component>] [RENAME <name>] [OPTIONAL])The PROGRAMS form is identical to the FILES form except that the default permissions for the installed file also include OWNER_EXECUTE, GROUP_EXECUTE, and WORLD_EXECUTE. This form is intended to install programs that are not targets, such as shell scripts. Use the TARGETS form to install targets built within the project. The DIRECTORY signature: install(DIRECTORY dirs... DESTINATION <dir> [FILE_PERMISSIONS permissions...] [DIRECTORY_PERMISSIONS permissions...] [USE_SOURCE_PERMISSIONS] [OPTIONAL] [CONFIGURATIONS [Debug|Release|...]] [COMPONENT <component>] [FILES_MATCHING] [[PATTERN <pattern> | REGEX <regex>] [EXCLUDE] [PERMISSIONS permissions...]] [...])The DIRECTORY form installs contents of one or more directories to a given destination. The directory structure is copied verbatim to the destination. The last component of each directory name is appended to the destination directory but a trailing slash may be used to avoid this because it leaves the last component empty. Directory names given as relative paths are interpreted with respect to the current source directory. If no input directory names are given the destination directory will be created but nothing will be installed into it. The FILE_PERMISSIONS and DIRECTORY_PERMISSIONS options specify permissions given to files and directories in the destination. If USE_SOURCE_PERMISSIONS is specified and FILE_PERMISSIONS is not, file permissions will be copied from the source directory structure. If no permissions are specified files will be given the default permissions specified in the FILES form of the command, and the directories will be given the default permissions specified in the PROGRAMS form of the command. Installation of directories may be controlled with fine granularity using the PATTERN or REGEX options. These "match" options specify a globbing pattern or regular expression to match directories or files encountered within input directories. They may be used to apply certain options (see below) to a subset of the files and directories encountered. The full path to each input file or directory (with forward slashes) is matched against the expression. A PATTERN will match only complete file names: the portion of the full path matching the pattern must occur at the end of the file name and be preceded by a slash. A REGEX will match any portion of the full path but it may use '/' and '$' to simulate the PATTERN behavior. By default all files and directories are installed whether or not they are matched. The FILES_MATCHING option may be given before the first match option to disable installation of files (but not directories) not matched by any expression. For example, the code install(DIRECTORY src/ DESTINATION include/myproj FILES_MATCHING PATTERN "*.h")will extract and install header files from a source tree. Some options may follow a PATTERN or REGEX expression and are applied only to files or directories matching them. The EXCLUDE option will skip the matched file or directory. The PERMISSIONS option overrides the permissions setting for the matched file or directory. For example the code install(DIRECTORY icons scripts/ DESTINATION share/myproj PATTERN "CVS" EXCLUDE PATTERN "scripts/*" PERMISSIONS OWNER_EXECUTE OWNER_WRITE OWNER_READ GROUP_EXECUTE GROUP_READ)will install the icons directory to share/myproj/icons and the scripts directory to share/myproj. The icons will get default file permissions, the scripts will be given specific permissions, and any CVS directories will be excluded. The SCRIPT and CODE signature: install([[SCRIPT <file>] [CODE <code>]] [...])The SCRIPT form will invoke the given CMake script files during installation. If the script file name is a relative path it will be interpreted with respect to the current source directory. The CODE form will invoke the given CMake code during installation. Code is specified as a single argument inside a double−quoted string. For example, the code install(CODE "MESSAGE(\"Sample install message.\\")")will print a message during installation. The EXPORT signature: install(EXPORT <export−name> DESTINATION <dir> [NAMESPACE <namespace>] [FILE <name>.cmake] [PERMISSIONS permissions...] [CONFIGURATIONS [Debug|Release|...]] [EXPORT_LINK_INTERFACE_LIBRARIES] [COMPONENT <component>])The EXPORT form generates and installs a CMake file containing code to import targets from the installation tree into another project. Target installations are associated with the export <export−name> using the EXPORT option of the install(TARGETS ...) signature documented above. The NAMESPACE option will prepend <namespace> to the target names as they are written to the import file. By default the generated file will be called <export−name>.cmake but the FILE option may be used to specify a different name. The value given to the FILE option must be a file name with the ".cmake" extension. If a CONFIGURATIONS option is given then the file will only be installed when one of the named configurations is installed. Additionally, the generated import file will reference only the matching target configurations. The EXPORT_LINK_INTERFACE_LIBRARIES keyword, if present, causes the contents of the properties matching (IMPORTED_)?LINK_INTERFACE_LIBRARIES(_<CONFIG>)? to be exported, when policy CMP0022 is NEW. If a COMPONENT option is specified that does not match that given to the targets associated with <export−name> the behavior is undefined. If a library target is included in the export but a target to which it links is not included the behavior is unspecified. The EXPORT form is useful to help outside projects use targets built and installed by the current project. For example, the code install(TARGETS myexe EXPORT myproj DESTINATION bin) install(EXPORT myproj NAMESPACE mp_ DESTINATION lib/myproj)will install the executable myexe to <prefix>/bin and code to import it in the file "<prefix>/lib/myproj/myproj.cmake". An outside project may load this file with the include command and reference the myexe executable from the installation tree using the imported target name mp_myexe as if the target were built in its own tree. NOTE: This command supercedes the INSTALL_TARGETS command and the target properties PRE_INSTALL_SCRIPT and POST_INSTALL_SCRIPT. It also replaces the FILES forms of the INSTALL_FILES and INSTALL_PROGRAMS commands. The processing order of these install rules relative to those generated by INSTALL_TARGETS, INSTALL_FILES, and INSTALL_PROGRAMS commands is not defined. link_directories  Specify directories in which the linker will look for libraries. link_directories(directory1 directory2 ...)Specify the paths in which the linker should search for libraries. The command will apply only to targets created after it is called. Relative paths given to this command are interpreted as relative to the current source directory, see CMP0015. Note that this command is rarely necessary. Library locations returned by find_package() and find_library() are absolute paths. Pass these absolute library file paths directly to the target_link_libraries() command. CMake will ensure the linker finds them. list  List operations. list(LENGTH <list> <output variable>) list(GET <list> <element index> [<element index> ...] <output variable>) list(APPEND <list> <element> [<element> ...]) list(FIND <list> <value> <output variable>) list(INSERT <list> <element_index> <element> [<element> ...]) list(REMOVE_ITEM <list> <value> [<value> ...]) list(REMOVE_AT <list> <index> [<index> ...]) list(REMOVE_DUPLICATES <list>) list(REVERSE <list>) list(SORT <list>)LENGTH will return a given list's length. GET will return list of elements specified by indices from the list. APPEND will append elements to the list. FIND will return the index of the element specified in the list or −1 if it wasn't found. INSERT will insert elements to the list to the specified location. REMOVE_AT and REMOVE_ITEM will remove items from the list. The difference is that REMOVE_ITEM will remove the given items, while REMOVE_AT will remove the items at the given indices. REMOVE_DUPLICATES will remove duplicated items in the list. REVERSE reverses the contents of the list in−place. SORT sorts the list in−place alphabetically. The list subcommands APPEND, INSERT, REMOVE_AT, REMOVE_ITEM, REMOVE_DUPLICATES, REVERSE and SORT may create new values for the list within the current CMake variable scope. Similar to the SET command, the LIST command creates new variable values in the current scope, even if the list itself is actually defined in a parent scope. To propagate the results of these operations upwards, use SET with PARENT_SCOPE, SET with CACHE INTERNAL, or some other means of value propagation. NOTES: A list in cmake is a ; separated group of strings. To create a list the set command can be used. For example, set(var a b c d e) creates a list with a;b;c;d;e, and set(var "a b c d e") creates a string or a list with one item in it. When specifying index values, if <element index> is 0 or greater, it is indexed from the beginning of the list, with 0 representing the first list element. If <element index> is −1 or lesser, it is indexed from the end of the list, with −1 representing the last list element. Be careful when counting with negative indices: they do not start from 0. −0 is equivalent to 0, the first list element. load_cache  Load in the values from another project's CMake cache. load_cache(pathToCacheFile READ_WITH_PREFIX prefix entry1...)Read the cache and store the requested entries in variables with their name prefixed with the given prefix. This only reads the values, and does not create entries in the local project's cache. load_cache(pathToCacheFile [EXCLUDE entry1...] [INCLUDE_INTERNALS entry1...])Load in the values from another cache and store them in the local project's cache as internal entries. This is useful for a project that depends on another project built in a different tree. EXCLUDE option can be used to provide a list of entries to be excluded. INCLUDE_INTERNALS can be used to provide a list of internal entries to be included. Normally, no internal entries are brought in. Use of this form of the command is strongly discouraged, but it is provided for backward compatibility. load_command  Load a command into a running CMake. load_command(COMMAND_NAME <loc1> [loc2 ...])The given locations are searched for a library whose name is cmCOMMAND_NAME. If found, it is loaded as a module and the command is added to the set of available CMake commands. Usually, TRY_COMPILE is used before this command to compile the module. If the command is successfully loaded a variable named CMAKE_LOADED_COMMAND_<COMMAND_NAME>will be set to the full path of the module that was loaded. Otherwise the variable will not be set. macro  Start recording a macro for later invocation as a command. macro(<name> [arg1 [arg2 [arg3 ...]]]) COMMAND1(ARGS ...) COMMAND2(ARGS ...) ... endmacro(<name>)Define a macro named <name> that takes arguments named arg1 arg2 arg3 (...). Commands listed after macro, but before the matching endmacro, are not invoked until the macro is invoked. When it is invoked, the commands recorded in the macro are first modified by replacing formal parameters (${arg1}) with the arguments passed, and then invoked as normal commands. In addition to referencing the formal parameters you can reference the values ${ARGC} which will be set to the number of arguments passed into the function as well as ${ARGV0} ${ARGV1} ${ARGV2} ... which will have the actual values of the arguments passed in. This facilitates creating macros with optional arguments. Additionally ${ARGV} holds the list of all arguments given to the macro and ${ARGN} holds the list of arguments past the last expected argument. Note that the parameters to a macro and values such as ARGN are not variables in the usual CMake sense. They are string replacements much like the C preprocessor would do with a macro. If you want true CMake variables and/or better CMake scope control you should look at the function command. See the cmake_policy() command documentation for the behavior of policies inside macros. mark_as_advanced  Mark cmake cached variables as advanced. mark_as_advanced([CLEAR|FORCE] VAR VAR2 VAR...)Mark the named cached variables as advanced. An advanced variable will not be displayed in any of the cmake GUIs unless the show advanced option is on. If CLEAR is the first argument advanced variables are changed back to unadvanced. If FORCE is the first argument, then the variable is made advanced. If neither FORCE nor CLEAR is specified, new values will be marked as advanced, but if the variable already has an advanced/non−advanced state, it will not be changed. It does nothing in script mode. math  Mathematical expressions. math(EXPR <output variable> <math expression>)EXPR evaluates mathematical expression and returns result in the output variable. Example mathematical expression is '5 * ( 10 + 13 )'. Supported operators are + − * / % | & ^ ~ << >> * / %. They have the same meaning as they do in C code. message  Display a message to the user. message([STATUS|WARNING|AUTHOR_WARNING|FATAL_ERROR|SEND_ERROR] "message to display" ...)The optional keyword determines the type of message: (none) = Important information STATUS = Incidental information WARNING = CMake Warning, continue processing AUTHOR_WARNING = CMake Warning (dev), continue processing SEND_ERROR = CMake Error, continue processing, but skip generation FATAL_ERROR = CMake Error, stop processing and generationThe CMake command−line tool displays STATUS messages on stdout and all other message types on stderr. The CMake GUI displays all messages in its log area. The interactive dialogs (ccmake and CMakeSetup) show STATUS messages one at a time on a status line and other messages in interactive pop−up boxes. CMake Warning and Error message text displays using a simple markup language. Non−indented text is formatted in line−wrapped paragraphs delimited by newlines. Indented text is considered pre−formatted. option  Provides an option that the user can optionally select. option(<option_variable> "help string describing option" [initial value])Provide an option for the user to select as ON or OFF. If no initial value is provided, OFF is used. If you have options that depend on the values of other options, see the module help for CMakeDependentOption. project  Set a name for the entire project. project(<projectname> [languageName1 languageName2 ... ] )Sets the name of the project. Additionally this sets the variables <projectName>_BINARY_DIR and <projectName>_SOURCE_DIR to the respective values. Optionally you can specify which languages your project supports. Example languages are CXX (i.e. C++), C, Fortran, etc. By default C and CXX are enabled. E.g. if you do not have a C++ compiler, you can disable the check for it by explicitly listing the languages you want to support, e.g. C. By using the special language "NONE" all checks for any language can be disabled. If a variable exists called CMAKE_PROJECT_<projectName>_INCLUDE, the file pointed to by that variable will be included as the last step of the project command. The top−level CMakeLists.txt file for a project must contain a literal, direct call to the project() command; loading one through the include() command is not sufficient. If no such call exists CMake will implicitly add one to the top that enables the default languages (C and CXX). qt_wrap_cpp  Create Qt Wrappers. qt_wrap_cpp(resultingLibraryName DestName SourceLists ...)Produce moc files for all the .h files listed in the SourceLists. The moc files will be added to the library using the DestName source list. qt_wrap_ui  Create Qt user interfaces Wrappers. qt_wrap_ui(resultingLibraryName HeadersDestName SourcesDestName SourceLists ...)Produce .h and .cxx files for all the .ui files listed in the SourceLists. The .h files will be added to the library using the HeadersDestNamesource list. The .cxx files will be added to the library using the SourcesDestNamesource list. remove_definitions  Removes −D define flags added by add_definitions. remove_definitions(−DFOO −DBAR ...)Removes flags (added by add_definitions) from the compiler command line for sources in the current directory and below. return  Return from a file, directory or function. return()Returns from a file, directory or function. When this command is encountered in an included file (via include() or find_package()), it causes processing of the current file to stop and control is returned to the including file. If it is encountered in a file which is not included by another file, e.g. a CMakeLists.txt, control is returned to the parent directory if there is one. If return is called in a function, control is returned to the caller of the function. Note that a macro is not a function and does not handle return like a function does. separate_arguments  Parse space−separated arguments into a semicolon−separated list. separate_arguments(<var> <UNIX|WINDOWS>_COMMAND "<args>")Parses a unix− or windows−style command−line string "<args>" and stores a semicolon−separated list of the arguments in <var>. The entire command line must be given in one "<args>" argument. The UNIX_COMMAND mode separates arguments by unquoted whitespace. It recognizes both single−quote and double−quote pairs. A backslash escapes the next literal character (\" is "); there are no special escapes (\\n is just n). The WINDOWS_COMMAND mode parses a windows command−line using the same syntax the runtime library uses to construct argv at startup. It separates arguments by whitespace that is not double−quoted. Backslashes are literal unless they precede double−quotes. See the MSDN article "Parsing C Command−Line Arguments" for details. separate_arguments(VARIABLE)Convert the value of VARIABLE to a semi−colon separated list. All spaces are replaced with ';'. This helps with generating command lines. set  Set a CMake, cache or environment variable to a given value. set(<variable> <value> [[CACHE <type> <docstring> [FORCE]] | PARENT_SCOPE])Within CMake sets <variable> to the value <value>. <value> is expanded before <variable> is set to it. Normally, set will set a regular CMake variable. If CACHE is present, then the <variable> is put in the cache instead, unless it is already in the cache. See section 'Variable types in CMake' below for details of regular and cache variables and their interactions. If CACHE is used, <type> and <docstring> are required. <type> is used by the CMake GUI to choose a widget with which the user sets a value. The value for <type> may be one of FILEPATH = File chooser dialog. PATH = Directory chooser dialog. STRING = Arbitrary string. BOOL = Boolean ON/OFF checkbox. INTERNAL = No GUI entry (used for persistent variables).If <type> is INTERNAL, the cache variable is marked as internal, and will not be shown to the user in tools like cmake−gui. This is intended for values that should be persisted in the cache, but which users should not normally change. INTERNAL implies FORCE. Normally, set(...CACHE...) creates cache variables, but does not modify them. If FORCE is specified, the value of the cache variable is set, even if the variable is already in the cache. This should normally be avoided, as it will remove any changes to the cache variable's value by the user. If PARENT_SCOPE is present, the variable will be set in the scope above the current scope. Each new directory or function creates a new scope. This command will set the value of a variable into the parent directory or calling function (whichever is applicable to the case at hand). PARENT_SCOPE cannot be combined with CACHE. If <value> is not specified then the variable is removed instead of set. See also: the unset() command. set(<variable> <value1> ... <valueN>)In this case <variable> is set to a semicolon separated list of values. <variable> can be an environment variable such as: set( ENV{PATH} /home/martink )in which case the environment variable will be set. *** Variable types in CMake *** In CMake there are two types of variables: normal variables and cache variables. Normal variables are meant for the internal use of the script (just like variables in most programming languages); they are not persisted across CMake runs. Cache variables (unless set with INTERNAL) are mostly intended for configuration settings where the first CMake run determines a suitable default value, which the user can then override, by editing the cache with tools such as ccmake or cmake−gui. Cache variables are stored in the CMake cache file, and are persisted across CMake runs. Both types can exist at the same time with the same name but different values. When ${FOO} is evaluated, CMake first looks for a normal variable 'FOO' in scope and uses it if set. If and only if no normal variable exists then it falls back to the cache variable 'FOO'. Some examples: The code 'set(FOO "x")' sets the normal variable 'FOO'. It does not touch the cache, but it will hide any existing cache value 'FOO'. The code 'set(FOO "x" CACHE ...)' checks for 'FOO' in the cache, ignoring any normal variable of the same name. If 'FOO' is in the cache then nothing happens to either the normal variable or the cache variable. If 'FOO' is not in the cache, then it is added to the cache. Finally, whenever a cache variable is added or modified by a command, CMake also *removes* the normal variable of the same name from the current scope so that an immediately following evaluation of it will expose the newly cached value. Normally projects should avoid using normal and cache variables of the same name, as this interaction can be hard to follow. However, in some situations it can be useful. One example (used by some projects): A project has a subproject in its source tree. The child project has its own CMakeLists.txt, which is included from the parent CMakeLists.txt using add_subdirectory(). Now, if the parent and the child project provide the same option (for example a compiler option), the parent gets the first chance to add a user−editable option to the cache. Normally, the child would then use the same value that the parent uses. However, it may be necessary to hard−code the value for the child project's option while still allowing the user to edit the value used by the parent project. The parent project can achieve this simply by setting a normal variable with the same name as the option in a scope sufficient to hide the option's cache variable from the child completely. The parent has already set the cache variable, so the child's set(...CACHE...) will do nothing, and evaluating the option variable will use the value from the normal variable, which hides the cache variable. set_directory_properties  Set a property of the directory. set_directory_properties(PROPERTIES prop1 value1 prop2 value2)Set a property for the current directory and subdirectories. If the property is not found, CMake will report an error. The properties include: INCLUDE_DIRECTORIES, LINK_DIRECTORIES, INCLUDE_REGULAR_EXPRESSION, and ADDITIONAL_MAKE_CLEAN_FILES. ADDITIONAL_MAKE_CLEAN_FILES is a list of files that will be cleaned as a part of "make clean" stage. set_property  Set a named property in a given scope. set_property(<GLOBAL | DIRECTORY [dir] | TARGET [target1 [target2 ...]] | SOURCE [src1 [src2 ...]] | TEST [test1 [test2 ...]] | CACHE [entry1 [entry2 ...]]> [APPEND] [APPEND_STRING] PROPERTY <name> [value1 [value2 ...]])Set one property on zero or more objects of a scope. The first argument determines the scope in which the property is set. It must be one of the following: GLOBAL scope is unique and does not accept a name. DIRECTORY scope defaults to the current directory but another directory (already processed by CMake) may be named by full or relative path. TARGET scope may name zero or more existing targets. SOURCE scope may name zero or more source files. Note that source file properties are visible only to targets added in the same directory (CMakeLists.txt). TEST scope may name zero or more existing tests. CACHE scope must name zero or more cache existing entries. The required PROPERTY option is immediately followed by the name of the property to set. Remaining arguments are used to compose the property value in the form of a semicolon−separated list. If the APPEND option is given the list is appended to any existing property value.If the APPEND_STRING option is given the string is append to any existing property value as string, i.e. it results in a longer string and not a list of strings. set_source_files_properties  Source files can have properties that affect how they are built. set_source_files_properties([file1 [file2 [...]]] PROPERTIES prop1 value1 [prop2 value2 [...]])Set properties associated with source files using a key/value paired list. See properties documentation for those known to CMake. Unrecognized properties are ignored. Source file properties are visible only to targets added in the same directory (CMakeLists.txt). set_target_properties  Targets can have properties that affect how they are built. set_target_properties(target1 target2 ... PROPERTIES prop1 value1 prop2 value2 ...)Set properties on a target. The syntax for the command is to list all the files you want to change, and then provide the values you want to set next. You can use any prop value pair you want and extract it later with the GET_TARGET_PROPERTY command. Properties that affect the name of a target's output file are as follows. The PREFIX and SUFFIX properties override the default target name prefix (such as "lib") and suffix (such as ".so"). IMPORT_PREFIX and IMPORT_SUFFIX are the equivalent properties for the import library corresponding to a DLL (for SHARED library targets). OUTPUT_NAME sets the real name of a target when it is built and can be used to help create two targets of the same name even though CMake requires unique logical target names. There is also a <CONFIG>_OUTPUT_NAME that can set the output name on a per−configuration basis. <CONFIG>_POSTFIX sets a postfix for the real name of the target when it is built under the configuration named by <CONFIG> (in upper−case, such as "DEBUG_POSTFIX"). The value of this property is initialized when the target is created to the value of the variable CMAKE_<CONFIG>_POSTFIX (except for executable targets because earlier CMake versions which did not use this variable for executables). The LINK_FLAGS property can be used to add extra flags to the link step of a target. LINK_FLAGS_<CONFIG> will add to the configuration <CONFIG>, for example, DEBUG, RELEASE, MINSIZEREL, RELWITHDEBINFO. DEFINE_SYMBOL sets the name of the preprocessor symbol defined when compiling sources in a shared library. If not set here then it is set to target_EXPORTS by default (with some substitutions if the target is not a valid C identifier). This is useful for headers to know whether they are being included from inside their library or outside to properly setup dllexport/dllimport decorations. The COMPILE_FLAGS property sets additional compiler flags used to build sources within the target. It may also be used to pass additional preprocessor definitions. The LINKER_LANGUAGE property is used to change the tool used to link an executable or shared library. The default is set the language to match the files in the library. CXX and C are common values for this property. For shared libraries VERSION and SOVERSION can be used to specify the build version and API version respectively. When building or installing appropriate symlinks are created if the platform supports symlinks and the linker supports so−names. If only one of both is specified the missing is assumed to have the same version number. For executables VERSION can be used to specify the build version. When building or installing appropriate symlinks are created if the platform supports symlinks. For shared libraries and executables on Windows the VERSION attribute is parsed to extract a "major.minor" version number. These numbers are used as the image version of the binary. There are a few properties used to specify RPATH rules. INSTALL_RPATH is a semicolon−separated list specifying the rpath to use in installed targets (for platforms that support it). INSTALL_RPATH_USE_LINK_PATH is a boolean that if set to true will append directories in the linker search path and outside the project to the INSTALL_RPATH. SKIP_BUILD_RPATH is a boolean specifying whether to skip automatic generation of an rpath allowing the target to run from the build tree. BUILD_WITH_INSTALL_RPATH is a boolean specifying whether to link the target in the build tree with the INSTALL_RPATH. This takes precedence over SKIP_BUILD_RPATH and avoids the need for relinking before installation. INSTALL_NAME_DIR is a string specifying the directory portion of the "install_name" field of shared libraries on Mac OSX to use in the installed targets. When the target is created the values of the variables CMAKE_INSTALL_RPATH, CMAKE_INSTALL_RPATH_USE_LINK_PATH, CMAKE_SKIP_BUILD_RPATH, CMAKE_BUILD_WITH_INSTALL_RPATH, and CMAKE_INSTALL_NAME_DIR are used to initialize these properties. PROJECT_LABEL can be used to change the name of the target in an IDE like visual studio. VS_KEYWORD can be set to change the visual studio keyword, for example Qt integration works better if this is set to Qt4VSv1.0. VS_SCC_PROJECTNAME, VS_SCC_LOCALPATH, VS_SCC_PROVIDER and VS_SCC_AUXPATH can be set to add support for source control bindings in a Visual Studio project file. VS_GLOBAL_<variable> can be set to add a Visual Studio project−specific global variable. Qt integration works better if VS_GLOBAL_QtVersion is set to the Qt version FindQt4.cmake found. For example, "4.7.3" The PRE_INSTALL_SCRIPT and POST_INSTALL_SCRIPT properties are the old way to specify CMake scripts to run before and after installing a target. They are used only when the old INSTALL_TARGETS command is used to install the target. Use the INSTALL command instead. The EXCLUDE_FROM_DEFAULT_BUILD property is used by the visual studio generators. If it is set to 1 the target will not be part of the default build when you select "Build Solution". This can also be set on a per−configuration basis using EXCLUDE_FROM_DEFAULT_BUILD_<CONFIG>. set_tests_properties  Set a property of the tests. set_tests_properties(test1 [test2...] PROPERTIES prop1 value1 prop2 value2)Set a property for the tests. If the property is not found, CMake will report an error. The properties include: WILL_FAIL: If set to true, this will invert the pass/fail flag of the test. PASS_REGULAR_EXPRESSION: If set, the test output will be checked against the specified regular expressions and at least one of the regular expressions has to match, otherwise the test will fail. Example: PASS_REGULAR_EXPRESSION "TestPassed;All ok"FAIL_REGULAR_EXPRESSION: If set, if the output will match to one of specified regular expressions, the test will fail. Example: PASS_REGULAR_EXPRESSION "[^a−z]Error;ERROR;Failed"Both PASS_REGULAR_EXPRESSION and FAIL_REGULAR_EXPRESSION expect a list of regular expressions. TIMEOUT: Setting this will limit the test runtime to the number of seconds specified. site_name  Set the given variable to the name of the computer. site_name(variable)source_group  Define a grouping for sources in the makefile. source_group(name [REGULAR_EXPRESSION regex] [FILES src1 src2 ...])Defines a group into which sources will be placed in project files. This is mainly used to setup file tabs in Visual Studio. Any file whose name is listed or matches the regular expression will be placed in this group. If a file matches multiple groups, the LAST group that explicitly lists the file will be favored, if any. If no group explicitly lists the file, the LAST group whose regular expression matches the file will be favored. The name of the group may contain backslashes to specify subgroups: source_group(outer\inner ...)For backwards compatibility, this command also supports the format: source_group(name regex)string  String operations. string(REGEX MATCH <regular_expression> <output variable> <input> [<input>...]) string(REGEX MATCHALL <regular_expression> <output variable> <input> [<input>...]) string(REGEX REPLACE <regular_expression> <replace_expression> <output variable> <input> [<input>...]) string(REPLACE <match_string> <replace_string> <output variable> <input> [<input>...]) string(<MD5|SHA1|SHA224|SHA256|SHA384|SHA512> <output variable> <input>) string(COMPARE EQUAL <string1> <string2> <output variable>) string(COMPARE NOTEQUAL <string1> <string2> <output variable>) string(COMPARE LESS <string1> <string2> <output variable>) string(COMPARE GREATER <string1> <string2> <output variable>) string(ASCII <number> [<number> ...] <output variable>) string(CONFIGURE <string1> <output variable> [@ONLY] [ESCAPE_QUOTES]) string(TOUPPER <string1> <output variable>) string(TOLOWER <string1> <output variable>) string(LENGTH <string> <output variable>) string(SUBSTRING <string> <begin> <length> <output variable>) string(STRIP <string> <output variable>) string(RANDOM [LENGTH <length>] [ALPHABET <alphabet>] [RANDOM_SEED <seed>] <output variable>) string(FIND <string> <substring> <output variable> [REVERSE]) string(TIMESTAMP <output variable> [<format string>] [UTC]) string(MAKE_C_IDENTIFIER <input string> <output variable>)REGEX MATCH will match the regular expression once and store the match in the output variable. REGEX MATCHALL will match the regular expression as many times as possible and store the matches in the output variable as a list. REGEX REPLACE will match the regular expression as many times as possible and substitute the replacement expression for the match in the output. The replace expression may refer to paren−delimited subexpressions of the match using \1, \\2, ..., \\9. Note that two backslashes (\\\\1) are required in CMake code to get a backslash through argument parsing. REPLACE will replace all occurrences of match_string in the input with replace_string and store the result in the output. MD5, SHA1, SHA224, SHA256, SHA384, and SHA512 will compute a cryptographic hash of the input string. COMPARE EQUAL/NOTEQUAL/LESS/GREATER will compare the strings and store true or false in the output variable. ASCII will convert all numbers into corresponding ASCII characters. CONFIGURE will transform a string like CONFIGURE_FILE transforms a file. TOUPPER/TOLOWER will convert string to upper/lower characters. LENGTH will return a given string's length. SUBSTRING will return a substring of a given string. If length is −1 the remainder of the string starting at begin will be returned. STRIP will return a substring of a given string with leading and trailing spaces removed. RANDOM will return a random string of given length consisting of characters from the given alphabet. Default length is 5 characters and default alphabet is all numbers and upper and lower case letters. If an integer RANDOM_SEED is given, its value will be used to seed the random number generator. FIND will return the position where the given substring was found in the supplied string. If the REVERSE flag was used, the command will search for the position of the last occurrence of the specified substring. The following characters have special meaning in regular expressions: ^ Matches at beginning of input $ Matches at end of input . Matches any single character [ ] Matches any character(s) inside the brackets [^ ] Matches any character(s) not inside the brackets − Inside brackets, specifies an inclusive range between characters on either side e.g. [a−f] is [abcdef] To match a literal − using brackets, make it the first or the last character e.g. [+*/−] matches basic mathematical operators. * Matches preceding pattern zero or more times + Matches preceding pattern one or more times ? Matches preceding pattern zero or once only | Matches a pattern on either side of the | () Saves a matched subexpression, which can be referenced in the REGEX REPLACE operation. Additionally it is saved by all regular expression−related commands, including e.g. if( MATCHES ), in the variables CMAKE_MATCH_(0..9).*, + and ? have higher precedence than concatenation. | has lower precedence than concatenation. This means that the regular expression "^ab+d$" matches "abbd" but not "ababd", and the regular expression "^(ab|cd)$" matches "ab" but not "abd". TIMESTAMP will write a string representation of the current date and/or time to the output variable. Should the command be unable to obtain a timestamp the output variable will be set to the empty string "". The optional UTC flag requests the current date/time representation to be in Coordinated Universal Time (UTC) rather than local time. The optional <format string> may contain the following format specifiers: %d The day of the current month (01−31). %H The hour on a 24−hour clock (00−23). %I The hour on a 12−hour clock (01−12). %j The day of the current year (001−366). %m The month of the current year (01−12). %M The minute of the current hour (00−59). %S The second of the current minute. 60 represents a leap second. (00−60) %U The week number of the current year (00−53). %w The day of the current week. 0 is Sunday. (0−6) %y The last two digits of the current year (00−99) %Y The current year. Unknown format specifiers will be ignored and copied to the output as−is. If no explicit <format string> is given it will default to: %Y−%m−%dT%H:%M:%S for local time. %Y−%m−%dT%H:%M:%SZ for UTC.MAKE_C_IDENTIFIER will write a string which can be used as an identifier in C. target_compile_definitions  Add compile definitions to a target. target_compile_definitions(<target> <INTERFACE|PUBLIC|PRIVATE> [items1...] [<INTERFACE|PUBLIC|PRIVATE> [items2...] ...])Specify compile definitions to use when compiling a given target. The named <target> must have been created by a command such as add_executable or add_library and must not be an IMPORTED target. The INTERFACE, PUBLIC and PRIVATE keywords are required to specify the scope of the following arguments. PRIVATE and PUBLIC items will populate the COMPILE_DEFINITIONS property of <target>. PUBLIC and INTERFACE items will populate the INTERFACE_COMPILE_DEFINITIONS property of <target>. The following arguments specify compile definitions. Repeated calls for the same <target> append items in the order called. Arguments to target_compile_definitions may use "generator expressions" with the syntax "$<...>". Generator expressions are evaluated during build system generation to produce information specific to each build configuration. Valid expressions are: $<0:...> = empty string (ignores "...") $<1:...> = content of "..." $<CONFIG:cfg> = '1' if config is "cfg", else '0' $<CONFIGURATION> = configuration name $<BOOL:...> = '1' if the '...' is true, else '0' $<STREQUAL:a,b> = '1' if a is STREQUAL b, else '0' $<ANGLE−R> = A literal '>'. Used to compare strings which contain a '>' for example. $<COMMA> = A literal ','. Used to compare strings which contain a ',' for example. $<SEMICOLON> = A literal ';'. Used to prevent list expansion on an argument with ';'. $<JOIN:list,...> = joins the list with the content of "..." $<TARGET_NAME:...> = Marks ... as being the name of a target. This is required if exporting targets to multiple dependent export sets. The '...' must be a literal name of a target− it may not contain generator expressions. $<INSTALL_INTERFACE:...> = content of "..." when the property is exported using install(EXPORT), and empty otherwise. $<BUILD_INTERFACE:...> = content of "..." when the property is exported using export(), or when the target is used by another target in the same buildsystem. Expands to the empty string otherwise. $<C_COMPILER_ID> = The CMake−id of the C compiler used. $<C_COMPILER_ID:comp> = '1' if the CMake−id of the C compiler matches comp, otherwise '0'. $<CXX_COMPILER_ID> = The CMake−id of the CXX compiler used. $<CXX_COMPILER_ID:comp> = '1' if the CMake−id of the CXX compiler matches comp, otherwise '0'. $<VERSION_GREATER:v1,v2> = '1' if v1 is a version greater than v2, else '0'. $<VERSION_LESS:v1,v2> = '1' if v1 is a version less than v2, else '0'. $<VERSION_EQUAL:v1,v2> = '1' if v1 is the same version as v2, else '0'. $<C_COMPILER_VERSION> = The version of the C compiler used. $<C_COMPILER_VERSION:ver> = '1' if the version of the C compiler matches ver, otherwise '0'. $<CXX_COMPILER_VERSION> = The version of the CXX compiler used. $<CXX_COMPILER_VERSION:ver> = '1' if the version of the CXX compiler matches ver, otherwise '0'. $<TARGET_FILE:tgt> = main file (.exe, .so.1.2, .a) $<TARGET_LINKER_FILE:tgt> = file used to link (.a, .lib, .so) $<TARGET_SONAME_FILE:tgt> = file with soname (.so.3)where "tgt" is the name of a target. Target file expressions produce a full path, but _DIR and _NAME versions can produce the directory and file name components: $<TARGET_FILE_DIR:tgt>/$<TARGET_FILE_NAME:tgt> $<TARGET_LINKER_FILE_DIR:tgt>/$<TARGET_LINKER_FILE_NAME:tgt> $<TARGET_SONAME_FILE_DIR:tgt>/$<TARGET_SONAME_FILE_NAME:tgt> $<TARGET_PROPERTY:tgt,prop> = The value of the property prop on the target tgt.Note that tgt is not added as a dependency of the target this expression is evaluated on. $<TARGET_POLICY:pol> = '1' if the policy was NEW when the 'head' target was created, else '0'. If the policy was not set, the warning message for the policy will be emitted. This generator expression only works for a subset of policies. $<INSTALL_PREFIX> = Content of the install prefix when the target is exported via INSTALL(EXPORT) and empty otherwise.Boolean expressions: $<AND:?[,?]...> = '1' if all '?' are '1', else '0' $<OR:?[,?]...> = '0' if all '?' are '0', else '1' $<NOT:?> = '0' if '?' is '1', else '1'where '?' is always either '0' or '1'. Expressions with an implicit 'this' target: $<TARGET_PROPERTY:prop> = The value of the property prop on the target on which the generator expression is evaluated.target_compile_options  Add compile options to a target. target_compile_options(<target> [BEFORE] <INTERFACE|PUBLIC|PRIVATE> [items1...] [<INTERFACE|PUBLIC|PRIVATE> [items2...] ...])Specify compile options to use when compiling a given target. The named <target> must have been created by a command such as add_executable or add_library and must not be an IMPORTED target. If BEFORE is specified, the content will be prepended to the property instead of being appended. The INTERFACE, PUBLIC and PRIVATE keywords are required to specify the scope of the following arguments. PRIVATE and PUBLIC items will populate the COMPILE_OPTIONS property of <target>. PUBLIC and INTERFACE items will populate the INTERFACE_COMPILE_OPTIONS property of <target>. The following arguments specify compile opitions. Repeated calls for the same <target> append items in the order called. Arguments to target_compile_options may use "generator expressions" with the syntax "$<...>". Generator expressions are evaluated during build system generation to produce information specific to each build configuration. Valid expressions are: $<0:...> = empty string (ignores "...") $<1:...> = content of "..." $<CONFIG:cfg> = '1' if config is "cfg", else '0' $<CONFIGURATION> = configuration name $<BOOL:...> = '1' if the '...' is true, else '0' $<STREQUAL:a,b> = '1' if a is STREQUAL b, else '0' $<ANGLE−R> = A literal '>'. Used to compare strings which contain a '>' for example. $<COMMA> = A literal ','. Used to compare strings which contain a ',' for example. $<SEMICOLON> = A literal ';'. Used to prevent list expansion on an argument with ';'. $<JOIN:list,...> = joins the list with the content of "..." $<TARGET_NAME:...> = Marks ... as being the name of a target. This is required if exporting targets to multiple dependent export sets. The '...' must be a literal name of a target− it may not contain generator expressions. $<INSTALL_INTERFACE:...> = content of "..." when the property is exported using install(EXPORT), and empty otherwise. $<BUILD_INTERFACE:...> = content of "..." when the property is exported using export(), or when the target is used by another target in the same buildsystem. Expands to the empty string otherwise. $<C_COMPILER_ID> = The CMake−id of the C compiler used. $<C_COMPILER_ID:comp> = '1' if the CMake−id of the C compiler matches comp, otherwise '0'. $<CXX_COMPILER_ID> = The CMake−id of the CXX compiler used. $<CXX_COMPILER_ID:comp> = '1' if the CMake−id of the CXX compiler matches comp, otherwise '0'. $<VERSION_GREATER:v1,v2> = '1' if v1 is a version greater than v2, else '0'. $<VERSION_LESS:v1,v2> = '1' if v1 is a version less than v2, else '0'. $<VERSION_EQUAL:v1,v2> = '1' if v1 is the same version as v2, else '0'. $<C_COMPILER_VERSION> = The version of the C compiler used. $<C_COMPILER_VERSION:ver> = '1' if the version of the C compiler matches ver, otherwise '0'. $<CXX_COMPILER_VERSION> = The version of the CXX compiler used. $<CXX_COMPILER_VERSION:ver> = '1' if the version of the CXX compiler matches ver, otherwise '0'. $<TARGET_FILE:tgt> = main file (.exe, .so.1.2, .a) $<TARGET_LINKER_FILE:tgt> = file used to link (.a, .lib, .so) $<TARGET_SONAME_FILE:tgt> = file with soname (.so.3)where "tgt" is the name of a target. Target file expressions produce a full path, but _DIR and _NAME versions can produce the directory and file name components: $<TARGET_FILE_DIR:tgt>/$<TARGET_FILE_NAME:tgt> $<TARGET_LINKER_FILE_DIR:tgt>/$<TARGET_LINKER_FILE_NAME:tgt> $<TARGET_SONAME_FILE_DIR:tgt>/$<TARGET_SONAME_FILE_NAME:tgt> $<TARGET_PROPERTY:tgt,prop> = The value of the property prop on the target tgt.Note that tgt is not added as a dependency of the target this expression is evaluated on. $<TARGET_POLICY:pol> = '1' if the policy was NEW when the 'head' target was created, else '0'. If the policy was not set, the warning message for the policy will be emitted. This generator expression only works for a subset of policies. $<INSTALL_PREFIX> = Content of the install prefix when the target is exported via INSTALL(EXPORT) and empty otherwise.Boolean expressions: $<AND:?[,?]...> = '1' if all '?' are '1', else '0' $<OR:?[,?]...> = '0' if all '?' are '0', else '1' $<NOT:?> = '0' if '?' is '1', else '1'where '?' is always either '0' or '1'. Expressions with an implicit 'this' target: $<TARGET_PROPERTY:prop> = The value of the property prop on the target on which the generator expression is evaluated.target_include_directories  Add include directories to a target. target_include_directories(<target> [SYSTEM] [BEFORE] <INTERFACE|PUBLIC|PRIVATE> [items1...] [<INTERFACE|PUBLIC|PRIVATE> [items2...] ...])Specify include directories or targets to use when compiling a given target. The named <target> must have been created by a command such as add_executable or add_library and must not be an IMPORTED target. If BEFORE is specified, the content will be prepended to the property instead of being appended. The INTERFACE, PUBLIC and PRIVATE keywords are required to specify the scope of the following arguments. PRIVATE and PUBLIC items will populate the INCLUDE_DIRECTORIES property of <target>. PUBLIC and INTERFACE items will populate the INTERFACE_INCLUDE_DIRECTORIES property of <target>. The following arguments specify include directories. Specified include directories may be absolute paths or relative paths. Repeated calls for the same <target> append items in the order called.If SYSTEM is specified, the compiler will be told the directories are meant as system include directories on some platforms (signalling this setting might achieve effects such as the compiler skipping warnings, or these fixed−install system files not being considered in dependency calculations − see compiler docs). If SYSTEM is used together with PUBLIC or INTERFACE, the INTERFACE_SYSTEM_INCLUDE_DIRECTORIES target property will be populated with the specified directories. Arguments to target_include_directories may use "generator expressions" with the syntax "$<...>". Generator expressions are evaluated during build system generation to produce information specific to each build configuration. Valid expressions are: $<0:...> = empty string (ignores "...") $<1:...> = content of "..." $<CONFIG:cfg> = '1' if config is "cfg", else '0' $<CONFIGURATION> = configuration name $<BOOL:...> = '1' if the '...' is true, else '0' $<STREQUAL:a,b> = '1' if a is STREQUAL b, else '0' $<ANGLE−R> = A literal '>'. Used to compare strings which contain a '>' for example. $<COMMA> = A literal ','. Used to compare strings which contain a ',' for example. $<SEMICOLON> = A literal ';'. Used to prevent list expansion on an argument with ';'. $<JOIN:list,...> = joins the list with the content of "..." $<TARGET_NAME:...> = Marks ... as being the name of a target. This is required if exporting targets to multiple dependent export sets. The '...' must be a literal name of a target− it may not contain generator expressions. $<INSTALL_INTERFACE:...> = content of "..." when the property is exported using install(EXPORT), and empty otherwise. $<BUILD_INTERFACE:...> = content of "..." when the property is exported using export(), or when the target is used by another target in the same buildsystem. Expands to the empty string otherwise. $<C_COMPILER_ID> = The CMake−id of the C compiler used. $<C_COMPILER_ID:comp> = '1' if the CMake−id of the C compiler matches comp, otherwise '0'. $<CXX_COMPILER_ID> = The CMake−id of the CXX compiler used. $<CXX_COMPILER_ID:comp> = '1' if the CMake−id of the CXX compiler matches comp, otherwise '0'. $<VERSION_GREATER:v1,v2> = '1' if v1 is a version greater than v2, else '0'. $<VERSION_LESS:v1,v2> = '1' if v1 is a version less than v2, else '0'. $<VERSION_EQUAL:v1,v2> = '1' if v1 is the same version as v2, else '0'. $<C_COMPILER_VERSION> = The version of the C compiler used. $<C_COMPILER_VERSION:ver> = '1' if the version of the C compiler matches ver, otherwise '0'. $<CXX_COMPILER_VERSION> = The version of the CXX compiler used. $<CXX_COMPILER_VERSION:ver> = '1' if the version of the CXX compiler matches ver, otherwise '0'. $<TARGET_FILE:tgt> = main file (.exe, .so.1.2, .a) $<TARGET_LINKER_FILE:tgt> = file used to link (.a, .lib, .so) $<TARGET_SONAME_FILE:tgt> = file with soname (.so.3)where "tgt" is the name of a target. Target file expressions produce a full path, but _DIR and _NAME versions can produce the directory and file name components: $<TARGET_FILE_DIR:tgt>/$<TARGET_FILE_NAME:tgt> $<TARGET_LINKER_FILE_DIR:tgt>/$<TARGET_LINKER_FILE_NAME:tgt> $<TARGET_SONAME_FILE_DIR:tgt>/$<TARGET_SONAME_FILE_NAME:tgt> $<TARGET_PROPERTY:tgt,prop> = The value of the property prop on the target tgt.Note that tgt is not added as a dependency of the target this expression is evaluated on. $<TARGET_POLICY:pol> = '1' if the policy was NEW when the 'head' target was created, else '0'. If the policy was not set, the warning message for the policy will be emitted. This generator expression only works for a subset of policies. $<INSTALL_PREFIX> = Content of the install prefix when the target is exported via INSTALL(EXPORT) and empty otherwise.Boolean expressions: $<AND:?[,?]...> = '1' if all '?' are '1', else '0' $<OR:?[,?]...> = '0' if all '?' are '0', else '1' $<NOT:?> = '0' if '?' is '1', else '1'where '?' is always either '0' or '1'. Expressions with an implicit 'this' target: $<TARGET_PROPERTY:prop> = The value of the property prop on the target on which the generator expression is evaluated.target_link_libraries  Link a target to given libraries. target_link_libraries(<target> [item1 [item2 [...]]] [[debug|optimized|general] <item>] ...)Specify libraries or flags to use when linking a given target. The named <target> must have been created in the current directory by a command such as add_executable or add_library. The remaining arguments specify library names or flags. Repeated calls for the same <target> append items in the order called. If a library name matches that of another target in the project a dependency will automatically be added in the build system to make sure the library being linked is up−to−date before the target links. Item names starting with '', but not '−l' or '−framework', are treated as linker flags. A "debug", "optimized", or "general" keyword indicates that the library immediately following it is to be used only for the corresponding build configuration. The "debug" keyword corresponds to the Debug configuration (or to configurations named in the DEBUG_CONFIGURATIONS global property if it is set). The "optimized" keyword corresponds to all other configurations. The "general" keyword corresponds to all configurations, and is purely optional (assumed if omitted). Higher granularity may be achieved for per−configuration rules by creating and linking to IMPORTED library targets. See the IMPORTED mode of the add_library command for more information. Library dependencies are transitive by default with this signature. When this target is linked into another target then the libraries linked to this target will appear on the link line for the other target too. This transitive "link interface" is stored in the INTERFACE_LINK_LIBRARIES target property when policy CMP0022 is set to NEW and may be overridden by setting the property directly. (When CMP0022 is not set to NEW, transitive linking is builtin but may be overridden by the LINK_INTERFACE_LIBRARIES property. Calls to other signatures of this command may set the property making any libraries linked exclusively by this signature private.) CMake will also propagate "usage requirements" from linked library targets. Usage requirements affect compilation of sources in the <target>. They are specified by properties defined on linked targets. During generation of the build system, CMake integrates usage requirement property values with the corresponding build properties for <target>: INTERFACE_COMPILE_DEFINITONS: Appends to COMPILE_DEFINITONS INTERFACE_INCLUDE_DIRECTORIES: Appends to INCLUDE_DIRECTORIES INTERFACE_POSITION_INDEPENDENT_CODE: Sets POSITION_INDEPENDENT_CODE or checked for consistency with existing valueIf an <item> is a library in a Mac OX framework, the Headers directory of the framework will also be processed as a "usage requirement". This has the same effect as passing the framework directory as an include directory. target_link_libraries(<target> <PRIVATE|PUBLIC|INTERFACE> <lib> ... [<PRIVATE|PUBLIC|INTERFACE> <lib> ... ] ...])The PUBLIC, PRIVATE and INTERFACE keywords can be used to specify both the link dependencies and the link interface in one command. Libraries and targets following PUBLIC are linked to, and are made part of the link interface. Libraries and targets following PRIVATE are linked to, but are not made part of the link interface. Libraries following INTERFACE are appended to the link interface and are not used for linking <target>. target_link_libraries(<target> LINK_INTERFACE_LIBRARIES [[debug|optimized|general] <lib>] ...)The LINK_INTERFACE_LIBRARIES mode appends the libraries to the INTERFACE_LINK_LIBRARIES target property instead of using them for linking. If policy CMP0022 is not NEW, then this mode also appends libraries to the LINK_INTERFACE_LIBRARIES and its per−configuration equivalent. This signature is for compatibility only. Prefer the INTERFACE mode instead. Libraries specified as "debug" are wrapped in a generator expression to correspond to debug builds. If policy CMP0022 is not NEW, the libraries are also appended to the LINK_INTERFACE_LIBRARIES_DEBUG property (or to the properties corresponding to configurations listed in the DEBUG_CONFIGURATIONS global property if it is set). Libraries specified as "optimized" are appended to the INTERFACE_LINK_LIBRARIES property. If policy CMP0022 is not NEW, they are also appended to the LINK_INTERFACE_LIBRARIES property. Libraries specified as "general" (or without any keyword) are treated as if specified for both "debug" and "optimized". target_link_libraries(<target> <LINK_PRIVATE|LINK_PUBLIC> [[debug|optimized|general] <lib>] ... [<LINK_PRIVATE|LINK_PUBLIC> [[debug|optimized|general] <lib>] ...])The LINK_PUBLIC and LINK_PRIVATE modes can be used to specify both the link dependencies and the link interface in one command. This signature is for compatibility only. Prefer the PUBLIC or PRIVATE keywords instead. Libraries and targets following LINK_PUBLIC are linked to, and are made part of the INTERFACE_LINK_LIBRARIES. If policy CMP0022 is not NEW, they are also made part of the LINK_INTERFACE_LIBRARIES. Libraries and targets following LINK_PRIVATE are linked to, but are not made part of the INTERFACE_LINK_LIBRARIES (or LINK_INTERFACE_LIBRARIES). The library dependency graph is normally acyclic (a DAG), but in the case of mutually−dependent STATIC libraries CMake allows the graph to contain cycles (strongly connected components). When another target links to one of the libraries CMake repeats the entire connected component. For example, the code add_library(A STATIC a.c) add_library(B STATIC b.c) target_link_libraries(A B) target_link_libraries(B A) add_executable(main main.c) target_link_libraries(main A)links 'main' to 'A B A B'. (While one repetition is usually sufficient, pathological object file and symbol arrangements can require more. One may handle such cases by manually repeating the component in the last target_link_libraries call. However, if two archives are really so interdependent they should probably be combined into a single archive.) Arguments to target_link_libraries may use "generator expressions" with the syntax "$<...>". Note however, that generator expressions will not be used in OLD handling of CMP0003 or CMP0004. Generator expressions are evaluated during build system generation to produce information specific to each build configuration. Valid expressions are: $<0:...> = empty string (ignores "...") $<1:...> = content of "..." $<CONFIG:cfg> = '1' if config is "cfg", else '0' $<CONFIGURATION> = configuration name $<BOOL:...> = '1' if the '...' is true, else '0' $<STREQUAL:a,b> = '1' if a is STREQUAL b, else '0' $<ANGLE−R> = A literal '>'. Used to compare strings which contain a '>' for example. $<COMMA> = A literal ','. Used to compare strings which contain a ',' for example. $<SEMICOLON> = A literal ';'. Used to prevent list expansion on an argument with ';'. $<JOIN:list,...> = joins the list with the content of "..." $<TARGET_NAME:...> = Marks ... as being the name of a target. This is required if exporting targets to multiple dependent export sets. The '...' must be a literal name of a target− it may not contain generator expressions. $<INSTALL_INTERFACE:...> = content of "..." when the property is exported using install(EXPORT), and empty otherwise. $<BUILD_INTERFACE:...> = content of "..." when the property is exported using export(), or when the target is used by another target in the same buildsystem. Expands to the empty string otherwise. $<C_COMPILER_ID> = The CMake−id of the C compiler used. $<C_COMPILER_ID:comp> = '1' if the CMake−id of the C compiler matches comp, otherwise '0'. $<CXX_COMPILER_ID> = The CMake−id of the CXX compiler used. $<CXX_COMPILER_ID:comp> = '1' if the CMake−id of the CXX compiler matches comp, otherwise '0'. $<VERSION_GREATER:v1,v2> = '1' if v1 is a version greater than v2, else '0'. $<VERSION_LESS:v1,v2> = '1' if v1 is a version less than v2, else '0'. $<VERSION_EQUAL:v1,v2> = '1' if v1 is the same version as v2, else '0'. $<C_COMPILER_VERSION> = The version of the C compiler used. $<C_COMPILER_VERSION:ver> = '1' if the version of the C compiler matches ver, otherwise '0'. $<CXX_COMPILER_VERSION> = The version of the CXX compiler used. $<CXX_COMPILER_VERSION:ver> = '1' if the version of the CXX compiler matches ver, otherwise '0'. $<TARGET_FILE:tgt> = main file (.exe, .so.1.2, .a) $<TARGET_LINKER_FILE:tgt> = file used to link (.a, .lib, .so) $<TARGET_SONAME_FILE:tgt> = file with soname (.so.3)where "tgt" is the name of a target. Target file expressions produce a full path, but _DIR and _NAME versions can produce the directory and file name components: $<TARGET_FILE_DIR:tgt>/$<TARGET_FILE_NAME:tgt> $<TARGET_LINKER_FILE_DIR:tgt>/$<TARGET_LINKER_FILE_NAME:tgt> $<TARGET_SONAME_FILE_DIR:tgt>/$<TARGET_SONAME_FILE_NAME:tgt> $<TARGET_PROPERTY:tgt,prop> = The value of the property prop on the target tgt.Note that tgt is not added as a dependency of the target this expression is evaluated on. $<TARGET_POLICY:pol> = '1' if the policy was NEW when the 'head' target was created, else '0'. If the policy was not set, the warning message for the policy will be emitted. This generator expression only works for a subset of policies. $<INSTALL_PREFIX> = Content of the install prefix when the target is exported via INSTALL(EXPORT) and empty otherwise.Boolean expressions: $<AND:?[,?]...> = '1' if all '?' are '1', else '0' $<OR:?[,?]...> = '0' if all '?' are '0', else '1' $<NOT:?> = '0' if '?' is '1', else '1'where '?' is always either '0' or '1'. Expressions with an implicit 'this' target: $<TARGET_PROPERTY:prop> = The value of the property prop on the target on which the generator expression is evaluated.try_compile  Try building some code. try_compile(RESULT_VAR <bindir> <srcdir> <projectName> [targetName] [CMAKE_FLAGS flags...] [OUTPUT_VARIABLE <var>])Try building a project. In this form, srcdir should contain a complete CMake project with a CMakeLists.txt file and all sources. The bindir and srcdir will not be deleted after this command is run. Specify targetName to build a specific target instead of the 'all' or 'ALL_BUILD' target. try_compile(RESULT_VAR <bindir> <srcfile|SOURCES srcfile...> [CMAKE_FLAGS flags...] [COMPILE_DEFINITIONS flags...] [LINK_LIBRARIES libs...] [OUTPUT_VARIABLE <var>] [COPY_FILE <fileName> [COPY_FILE_ERROR <var>]])Try building an executable from one or more source files. In this form the user need only supply one or more source files that include a definition for 'main'. CMake will create a CMakeLists.txt file to build the source(s) as an executable. Specify COPY_FILE to get a copy of the linked executable at the given fileName and optionally COPY_FILE_ERROR to capture any error. In this version all files in bindir/CMakeFiles/CMakeTmp will be cleaned automatically. For debugging, −−debug−trycompile can be passed to cmake to avoid this clean. However, multiple sequential try_compile operations reuse this single output directory. If you use −−debug−trycompile, you can only debug one try_compile call at a time. The recommended procedure is to configure with cmake all the way through once, then delete the cache entry associated with the try_compile call of interest, and then re−run cmake again with −−debug−trycompile. Some extra flags that can be included are, INCLUDE_DIRECTORIES, LINK_DIRECTORIES, and LINK_LIBRARIES. COMPILE_DEFINITIONS are −Ddefinition that will be passed to the compile line. The srcfile signature also accepts a LINK_LIBRARIES argument which may contain a list of libraries or IMPORTED targets which will be linked to in the generated project. If LINK_LIBRARIES is specified as a parameter to try_compile, then any LINK_LIBRARIES passed as CMAKE_FLAGS will be ignored. try_compile creates a CMakeList.txt file on the fly that looks like this: add_definitions( <expanded COMPILE_DEFINITIONS from calling cmake>) include_directories(${INCLUDE_DIRECTORIES}) link_directories(${LINK_DIRECTORIES}) add_executable(cmTryCompileExec sources) target_link_libraries(cmTryCompileExec ${LINK_LIBRARIES})In both versions of the command, if OUTPUT_VARIABLE is specified, then the output from the build process is stored in the given variable. The success or failure of the try_compile, i.e. TRUE or FALSE respectively, is returned in RESULT_VAR. CMAKE_FLAGS can be used to pass −DVAR:TYPE=VALUE flags to the cmake that is run during the build. Set variable CMAKE_TRY_COMPILE_CONFIGURATION to choose a build configuration. try_run  Try compiling and then running some code. try_run(RUN_RESULT_VAR COMPILE_RESULT_VAR bindir srcfile [CMAKE_FLAGS <Flags>] [COMPILE_DEFINITIONS <flags>] [COMPILE_OUTPUT_VARIABLE comp] [RUN_OUTPUT_VARIABLE run] [OUTPUT_VARIABLE var] [ARGS <arg1> <arg2>...])Try compiling a srcfile. Return TRUE or FALSE for success or failure in COMPILE_RESULT_VAR. Then if the compile succeeded, run the executable and return its exit code in RUN_RESULT_VAR. If the executable was built, but failed to run, then RUN_RESULT_VAR will be set to FAILED_TO_RUN. COMPILE_OUTPUT_VARIABLE specifies the variable where the output from the compile step goes. RUN_OUTPUT_VARIABLE specifies the variable where the output from the running executable goes. For compatibility reasons OUTPUT_VARIABLE is still supported, which gives you the output from the compile and run step combined. Cross compiling issues When cross compiling, the executable compiled in the first step usually cannot be run on the build host. try_run() checks the CMAKE_CROSSCOMPILING variable to detect whether CMake is in crosscompiling mode. If that's the case, it will still try to compile the executable, but it will not try to run the executable. Instead it will create cache variables which must be filled by the user or by presetting them in some CMake script file to the values the executable would have produced if it had been run on its actual target platform. These variables are RUN_RESULT_VAR (explanation see above) and if RUN_OUTPUT_VARIABLE (or OUTPUT_VARIABLE) was used, an additional cache variable RUN_RESULT_VAR__COMPILE_RESULT_VAR__TRYRUN_OUTPUT.This is intended to hold stdout and stderr from the executable. In order to make cross compiling your project easier, use try_run only if really required. If you use try_run, use RUN_OUTPUT_VARIABLE (or OUTPUT_VARIABLE) only if really required. Using them will require that when crosscompiling, the cache variables will have to be set manually to the output of the executable. You can also "guard" the calls to try_run with if(CMAKE_CROSSCOMPILING) and provide an easy−to−preset alternative for this case. Set variable CMAKE_TRY_COMPILE_CONFIGURATION to choose a build configuration. unset  Unset a variable, cache variable, or environment variable. unset(<variable> [CACHE])Removes the specified variable causing it to become undefined. If CACHE is present then the variable is removed from the cache instead of the current scope. <variable> can be an environment variable such as: unset(ENV{LD_LIBRARY_PATH})in which case the variable will be removed from the current environment. variable_watch  Watch the CMake variable for change. variable_watch(<variable name> [<command to execute>])If the specified variable changes, the message will be printed about the variable being changed. If the command is specified, the command will be executed. The command will receive the following arguments: COMMAND(<variable> <access> <value> <current list file> <stack>) while  Evaluate a group of commands while a condition is true while(condition) COMMAND1(ARGS ...) COMMAND2(ARGS ...) ... endwhile(condition)All commands between while and the matching endwhile are recorded without being invoked. Once the endwhile is evaluated, the recorded list of commands is invoked as long as the condition is true. The condition is evaluated using the same logic as the if command.

COPYRIGHTCopyright 2000−2012 Kitware, Inc., Insight Software Consortium. All rights reserved. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. Neither the names of Kitware, Inc., the Insight Software Consortium, nor the names of their contributors may be used to endorse or promote products derived from this software without specific prior written permission. THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

SEE ALSOThe following resources are available to get help using CMake: Home Page  http://www.cmake.org The primary starting point for learning about CMake. Frequently Asked Questions  http://www.cmake.org/Wiki/CMake_FAQ A Wiki is provided containing answers to frequently asked questions. Online Documentation  http://www.cmake.org/HTML/Documentation.html Links to available documentation may be found on this web page. Mailing List  http://www.cmake.org/HTML/MailingLists.html For help and discussion about using cmake, a mailing list is provided at cmake@cmake.org. The list is member−post−only but one may sign up on the CMake web page. Please first read the full documentation at http://www.cmake.org before posting questions to the list.
0
Johanes Gumabo
Data Size   :   414,056 byte
man-cmakecommands.1Build   :   2024-12-05, 20:55   :  
Visitor Screen   :   x
Visitor Counter ( page / site )   :   4 / 180,765
Visitor ID   :     :  
Visitor IP   :   52.15.190.187   :  
Visitor Provider   :   AMAZON-02   :  
Provider Position ( lat x lon )   :   39.962500 x -83.006100   :   x
Provider Accuracy Radius ( km )   :   1000   :  
Provider City   :   Columbus   :  
Provider Province   :   Ohio ,   :   ,
Provider Country   :   United States   :  
Provider Continent   :   North America   :  
Visitor Recorder   :   Version   :  
Visitor Recorder   :   Library   :  
Online Linux Manual Page   :   Version   :   Online Linux Manual Page - Fedora.40 - march=x86-64 - mtune=generic - 24.12.05
Online Linux Manual Page   :   Library   :   lib_c - 24.10.03 - march=x86-64 - mtune=generic - Fedora.40
Online Linux Manual Page   :   Library   :   lib_m - 24.10.03 - march=x86-64 - mtune=generic - Fedora.40
Data Base   :   Version   :   Online Linux Manual Page Database - 24.04.13 - march=x86-64 - mtune=generic - fedora-38
Data Base   :   Library   :   lib_c - 23.02.07 - march=x86-64 - mtune=generic - fedora.36

Very long time ago, I have the best tutor, Wenzel Svojanovsky . If someone knows the email address of Wenzel Svojanovsky , please send an email to johanes_gumabo@yahoo.co.id .
If error, please print screen and send to johanes_gumabo@yahoo.co.id
Under development. Support me via PayPal.

ERROR : Need New Coding :         (rof_nr_x|149|cmakecommands.1|684|\n, 'DOS', 'WIN32' or 'CRLF' for \\r\\n.| 'UNIX' or 'LF' for \\n, 'DOS', 'WIN32' or 'CRLF' for \\r\\n. )         (rof_escape_sequence|91|cmakecommands.1|1453|\Software\\Kitware\\CMake\\Packages\\| HKEY_CURRENT_USER\\Software\\Kitware\\CMake\\Packages\\ )         (rof_escape_sequence|91|cmakecommands.1|1479|\Software\\Kitware\\CMake\\Packages\\| HKEY_LOCAL_MACHINE\\Software\\Kitware\\CMake\\Packages\\ )         (rof_escape_sequence|91|cmakecommands.1|2450|\"Sample install message.\\")")| install(CODE "MESSAGE(\\"Sample install message.\\")") )         (rof_escape_sequence|91|cmakecommands.1|2738|\" is "); there are no special escapes (\\n is just n). |The UNIX_COMMAND mode separates arguments by unquoted whitespace. It recognizes both single\-quote and double\-quote pairs. A backslash escapes the next literal character (\\" is "); there are no special escapes (\\n is just n). )         (rof_escape_sequence|91|cmakecommands.1|2984|\inner ...)| source_group(outer\\\\inner ...) )         (rof_escape_sequence|91|cmakecommands.1|3036|\1, \\2, ..., \\9. Note that two backslashes (\\\\1) are required in CMake code to get a backslash through argument parsing. |REGEX REPLACE will match the regular expression as many times as possible and substitute the replacement expression for the match in the output. The replace expression may refer to paren\-delimited subexpressions of the match using \\1, \\2, ..., \\9. Note that two backslashes (\\\\1) are required in CMake code to get a backslash through argument parsing. )