DH_INSTALL - Online Linux Manual PageSection : 1
Updated : 2021-03-06
Source : 13.3.4
Note : Debhelper

NAMEdh_install − install files into package build directories

SYNOPSISdh_install [−Xitem] [−−autodest] [−−sourcedir=dir] [debhelper options] [file|dir ... destdir]

DESCRIPTIONdh_install is a debhelper program that handles installing files into package build directories. There are many dh_install* commands that handle installing specific types of files such as documentation, examples, man pages, and so on, and they should be used when possible as they often have extra intelligence for those particular tasks. dh_install, then, is useful for installing everything else, for which no particular intelligence is needed. It is a replacement for the old dh_movefiles command. This program may be used in one of two ways. If you just have a file or two that the upstream Makefile does not install for you, you can run dh_install on them to move them into place. On the other hand, maybe you have a large package that builds multiple binary packages. You can use the upstream ​Makefile to install it all into debian/tmp, and then use dh_install to copy directories and files from there into the proper package build directories. From debhelper compatibility level 7 on, dh_install will fall back to looking in debian/tmp for files, if it does not find them in the current directory (or wherever you've told it to look using −−sourcedir).

FILESdebian/package.install List the files to install into each package and the directory they should be installed to. The format is a set of lines, where each line lists a file or files to install, and at the end of the line tells the directory it should be installed in. The name of the files (or directories) to install should be given relative to the current directory, while the installation directory is given relative to the package build directory. You may use wildcards in the names of the files to install. Note that if you list exactly one filename or wildcard-pattern on a line by itself, with no explicit destination, then dh_install will automatically guess the destination to use, the same as if the ​−−autodest option were used. Supports substitution variables in compat 13 and later as documented in debhelper(7). debian/not−installed Used with the deprecated −−list−missing and −−fail−missing options. Please refer to dh_missing(1) for the documentation of this file.

OPTIONS−−list−missing Deprecated: Please use dh_missing −−list−missing instead. If you use this option, dh_install will call dh_missing with that option after it has processed all the files. Please see dh_missing(1) for the documentation of this option. This option is removed in compat 12. −−fail−missing Deprecated: Please use dh_missing −−fail−missing instead. If you use this option, dh_install will call dh_missing with that option after it has processed all the files. Please see dh_missing(1) for the documentation of this option. This option is removed in compat 12. −−sourcedir=dir Look in the specified directory for files to be installed. Note that this is not the same as the −−sourcedirectory option used by the dh_auto_* commands. You rarely need to use this option, since ​dh_install automatically looks for files in debian/tmp in debhelper compatibility level 7 and above. −−autodest Guess as the destination directory to install things to. If this is specified, you should not list destination directories in ​debian/package.install files or on the command line. Instead, dh_install will guess as follows: Strip off debian/tmp (or the sourcedir if one is given) from the front of the filename, if it is present, and install into the dirname of the filename. So if the filename is debian/tmp/usr/bin, then that directory will be copied to debian/package/usr/. If the filename is ​debian/tmp/etc/passwd, it will be copied to debian/package/etc/. file|dir ... destdir Lists files (or directories) to install and where to install them to. The files will be installed into the first package dh_install acts on.

EXAMPLESHere are some small examples of configuration files for dh_install. ​ # Install my−prog into usr/bin (as "usr/bin/my−prog") ​ my−prog usr/bin ​ ​ # Install a plugins directory into usr/share/my−prog ​ # (as "usr/share/my−prog/plugins/") ​ plugins usr/share/my−prog ​ ​ # Install a file with spaces in into usr/share/my−prog/data ​ # (as "usr/share/my−prog/data/my datafile with spaces.txt") ​ # ASSUMES COMPAT 13, where substitution patterns are available ​ my${Space}datafile${Space}with${Space}spaces.txt usr/share/my−prog/data ​ ​ # Install a library into the multi−arch lib directory ​ # ASSUMES COMPAT 13, where substitution patterns are available ​ build/output/libfrop*.so.* usr/lib/${DEB_HOST_MULTIARCH}

LIMITATIONSdh_install cannot rename files or directories, it can only install them with the names they already have into wherever you want in the package build tree. However, renaming can be achieved by using dh-exec with compatibility level 9 or later. An example debian/package.install file using dh-exec could look like: ​ #!/usr/bin/dh−exec ​ debian/default.conf => /etc/my−package/start.conf Please remember the following three things: • The package must be using compatibility level 9 or later (see debhelper(7)) • The package will need a build-dependency on dh-exec. • The install file must be marked as executable.

SEE ALSOdebhelper(7) This program is a part of debhelper.

AUTHORJoey Hess <joeyh@debian.org>
0
Johanes Gumabo
Data Size   :   18,310 byte
man-dh_install.1Build   :   2024-12-05, 20:55   :  
Visitor Screen   :   x
Visitor Counter ( page / site )   :   2 / 198,504
Visitor ID   :     :  
Visitor IP   :   3.145.12.100   :  
Visitor Provider   :   AMAZON-02   :  
Provider Position ( lat x lon )   :   39.962500 x -83.006100   :   x
Provider Accuracy Radius ( km )   :   1000   :  
Provider City   :   Columbus   :  
Provider Province   :   Ohio ,   :   ,
Provider Country   :   United States   :  
Provider Continent   :   North America   :  
Visitor Recorder   :   Version   :  
Visitor Recorder   :   Library   :  
Online Linux Manual Page   :   Version   :   Online Linux Manual Page - Fedora.40 - march=x86-64 - mtune=generic - 24.12.05
Online Linux Manual Page   :   Library   :   lib_c - 24.10.03 - march=x86-64 - mtune=generic - Fedora.40
Online Linux Manual Page   :   Library   :   lib_m - 24.10.03 - march=x86-64 - mtune=generic - Fedora.40
Data Base   :   Version   :   Online Linux Manual Page Database - 24.04.13 - march=x86-64 - mtune=generic - fedora-38
Data Base   :   Library   :   lib_c - 23.02.07 - march=x86-64 - mtune=generic - fedora.36

Very long time ago, I have the best tutor, Wenzel Svojanovsky . If someone knows the email address of Wenzel Svojanovsky , please send an email to johanes_gumabo@yahoo.co.id .
If error, please print screen and send to johanes_gumabo@yahoo.co.id
Under development. Support me via PayPal.

ERROR : Need New Coding :         (parse_manual_page_|249|dh_install.1|36/37|el══─{─══.|.el══─{─══. ds -- \|\(em\| )         (htmlprn|149|dh_install.1|36/37|.el══─{─══. ds --  —  |.el══─{─══. ds -- \|\(em\| )         (parse_manual_page_|249|dh_install.1|43|br══─}─══|'br══─}─══ )         (htmlprn|149|dh_install.1|43|'br══─}─══ |'br══─}─══ )