FENCE_AGENT - Online Linux Manual PageSection : 8
Updated : 2009-10-20
Source : fence_apc_snmp (Fence Agent)
NAMEfence_apc_snmp - Fence agent for APC, Tripplite PDU over SNMP
DESCRIPTIONfence_apc_snmp is an I/O Fencing agent which can be used with the APC network power switch or Tripplite PDU devices.It logs into a device via SNMP and reboots a specified outlet. It supports SNMP v1, v2c, v3 with all combinations of authenticity/privacy settings. fence_apc_snmp accepts options on the command line as well as from stdin. Fenced sends parameters through stdin when it execs the agent. fence_apc_snmp can be run by itself with command line options. This is useful for testing and for turning outlets on or off from scripts. Vendor URL: http://www.apc.com
PARAMETERS -o, --action=[action] Fencing Action (Default Value: reboot) -c, --community=[community] Set the community string (Default Value: private) -4, --inet4-only Forces agent to use IPv4 addresses only -6, --inet6-only Forces agent to use IPv6 addresses only -a, --ip=[ip] IP Address or Hostname This parameter is always required. -l, --username=[name] Login Name -p, --password=[password] Login password or passphrase -S, --password-script=[script] Script to retrieve password -n, --plug=[id] Physical plug number, name of virtual machine or UUID This parameter is always required. -b, --snmp-auth-prot=[prot] Set authentication protocol (MD5|SHA) -P, --snmp-priv-passwd=[pass] Set privacy protocol password -R, --snmp-priv-passwd-script Script to run to retrieve privacy password -B, --snmp-priv-prot=[prot] Set privacy protocol (DES|AES) -E, --snmp-sec-level=[level] Set security level (noAuthNoPriv|authNoPriv|authPriv) -d, --snmp-version=[version] Specifies SNMP version to use (1,2c,3) (Default Value: 1) -u, --udpport UDP/TCP port to use for connection with device -v, --verbose Verbose mode -D, --debug-file=[debugfile] Write debug information to given file -V, --version Display version information and exit -h, --help Display help and exit -C, --separator=[char] Separator for CSV created by operation list (Default Value: ,) --delay=[seconds] Wait X seconds before fencing is started (Default Value: 0) --login-timeout=[seconds] Wait X seconds for cmd prompt after login (Default Value: 5) --power-timeout=[seconds] Test X seconds for status change after ON/OFF (Default Value: 20) --power-wait=[seconds] Wait X seconds after issuing ON/OFF (Default Value: 0) --shell-timeout=[seconds] Wait X seconds for cmd prompt after issuing command (Default Value: 3) --retry-on=[attempts] Count of attempts to retry power on (Default Value: 1)
ACTIONS on Power on machine. off Power off machine. reboot Reboot machine. status This returns the status of the plug/virtual machine. list List available plugs with aliases/virtual machines if there is support for more then one device. Returns N/A otherwise. list-status List available plugs with aliases/virtual machines and their power state if it can be obtained without additional commands. monitor Check the health of fence device metadata Display the XML metadata describing this resource.
STDIN PARAMETERS action Fencing Action (Default Value: reboot) community Set the community string (Default Value: private) inet4_only Forces agent to use IPv4 addresses only inet6_only Forces agent to use IPv6 addresses only ipaddr IP Address or Hostname This parameter is always required. login Login Name passwd Login password or passphrase passwd_script Script to retrieve password port Physical plug number, name of virtual machine or UUID This parameter is always required. snmp_auth_prot Set authentication protocol (MD5|SHA) snmp_priv_passwd Set privacy protocol password snmp_priv_passwd_script Script to run to retrieve privacy password snmp_priv_prot Set privacy protocol (DES|AES) snmp_sec_level Set security level (noAuthNoPriv|authNoPriv|authPriv) snmp_version Specifies SNMP version to use (1,2c,3) (Default Value: 1) udpport UDP/TCP port to use for connection with device verbose Verbose mode debug Write debug information to given file version Display version information and exit help Display help and exit separator Separator for CSV created by operation list (Default Value: ,) delay Wait X seconds before fencing is started (Default Value: 0) login_timeout Wait X seconds for cmd prompt after login (Default Value: 5) power_timeout Test X seconds for status change after ON/OFF (Default Value: 20) power_wait Wait X seconds after issuing ON/OFF (Default Value: 0) shell_timeout Wait X seconds for cmd prompt after issuing command (Default Value: 3) retry_on Count of attempts to retry power on (Default Value: 1) 0
Johanes Gumabo
Data Size : 26,028 byte
man-fence_apc_snmp.8Build : 2024-12-05, 20:55 :
Visitor Screen : x
Visitor Counter ( page / site ) : 6 / 168,359
Visitor ID : :
Visitor IP : 3.129.210.35 :
Visitor Provider : AMAZON-02 :
Provider Position ( lat x lon ) : 39.962500 x -83.006100 : x
Provider Accuracy Radius ( km ) : 1000 :
Provider City : Columbus :
Provider Province : Ohio , : ,
Provider Country : United States :
Provider Continent : North America :
Visitor Recorder : Version :
Visitor Recorder : Library :
Online Linux Manual Page : Version : Online Linux Manual Page - Fedora.40 - march=x86-64 - mtune=generic - 24.12.05
Online Linux Manual Page : Library : lib_c - 24.10.03 - march=x86-64 - mtune=generic - Fedora.40
Online Linux Manual Page : Library : lib_m - 24.10.03 - march=x86-64 - mtune=generic - Fedora.40
Data Base : Version : Online Linux Manual Page Database - 24.04.13 - march=x86-64 - mtune=generic - fedora-38
Data Base : Library : lib_c - 23.02.07 - march=x86-64 - mtune=generic - fedora.36
Very long time ago, I have the best tutor, Wenzel Svojanovsky . If someone knows the email address of Wenzel Svojanovsky , please send an email to johanes_gumabo@yahoo.co.id .
If error, please print screen and send to johanes_gumabo@yahoo.co.id
Under development. Support me via PayPal.