GLSTENCILOPSEPARATE - Online Linux Manual PageSection : 3G
Updated : 01/20/2022
Source : [FIXME: source]
Note : [FIXME: manual]
NAMEglStencilOpSeparate − set front and/or back stencil test actions
C SPECIFICATIONvoid glStencilOpSeparate(GLenum face, GLenum sfail, GLenum dpfail, GLenum dppass);
PARAMETERSface Specifies whether front and/or back stencil state is updated. Three symbolic constants are valid: GL_FRONT, GL_BACK, and GL_FRONT_AND_BACK. sfail Specifies the action to take when the stencil test fails. Eight symbolic constants are accepted: GL_KEEP, GL_ZERO, GL_REPLACE, GL_INCR, GL_INCR_WRAP, GL_DECR, GL_DECR_WRAP, and GL_INVERT. The initial value is GL_KEEP. dpfail Specifies the stencil action when the stencil test passes, but the depth test fails. dpfail accepts the same symbolic constants as sfail. The initial value is GL_KEEP. dppass Specifies the stencil action when both the stencil test and the depth test pass, or when the stencil test passes and either there is no depth buffer or depth testing is not enabled. dppass accepts the same symbolic constants as sfail. The initial value is GL_KEEP.
DESCRIPTIONStenciling, like depth−buffering, enables and disables drawing on a per−pixel basis. You draw into the stencil planes using GL drawing primitives, then render geometry and images, using the stencil planes to mask out portions of the screen. Stenciling is typically used in multipass rendering algorithms to achieve special effects, such as decals, outlining, and constructive solid geometry rendering. The stencil test conditionally eliminates a pixel based on the outcome of a comparison between the value in the stencil buffer and a reference value. To enable and disable the test, call glEnable() and glDisable with argument GL_STENCIL_TEST; to control it, call glStencilFunc() or glStencilFuncSeparate(). There can be two separate sets of sfail, dpfail, and dppass parameters; one affects back−facing polygons, and the other affects front−facing polygons as well as other non−polygon primitives. glStencilOp() sets both front and back stencil state to the same values, as if glStencilOpSeparate() were called with face set to GL_FRONT_AND_BACK. glStencilOpSeparate takes three arguments that indicate what happens to the stored stencil value while stenciling is enabled. If the stencil test fails, no change is made to the pixel's color or depth buffers, and sfail specifies what happens to the stencil buffer contents. The following eight actions are possible. GL_KEEP Keeps the current value. GL_ZERO Sets the stencil buffer value to 0. GL_REPLACE Sets the stencil buffer value to ref, as specified by glStencilFunc(). GL_INCR Increments the current stencil buffer value. Clamps to the maximum representable unsigned value. GL_INCR_WRAP Increments the current stencil buffer value. Wraps stencil buffer value to zero when incrementing the maximum representable unsigned value. GL_DECR Decrements the current stencil buffer value. Clamps to 0. GL_DECR_WRAP Decrements the current stencil buffer value. Wraps stencil buffer value to the maximum representable unsigned value when decrementing a stencil buffer value of zero. GL_INVERT Bitwise inverts the current stencil buffer value. Stencil buffer values are treated as unsigned integers. When incremented and decremented, values are clamped to 0 and 2 n − 1, where n is the value returned by querying GL_STENCIL_BITS. The other two arguments to glStencilOpSeparate specify stencil buffer actions that depend on whether subsequent depth buffer tests succeed (dppass) or fail (dpfail) (see glDepthFunc()). The actions are specified using the same eight symbolic constants as sfail. Note that dpfail is ignored when there is no depth buffer, or when the depth buffer is not enabled. In these cases, sfail and dppass specify stencil action when the stencil test fails and passes, respectively.
NOTESInitially the stencil test is disabled. If there is no stencil buffer, no stencil modification can occur and it is as if the stencil test always passes.
ERRORSGL_INVALID_ENUM is generated if face is any value other than GL_FRONT, GL_BACK, or GL_FRONT_AND_BACK. GL_INVALID_ENUM is generated if sfail, dpfail, or dppass is any value other than the eight defined constant values.
ASSOCIATED GETSglGet() with argument GL_STENCIL_FAIL, GL_STENCIL_PASS_DEPTH_PASS, GL_STENCIL_PASS_DEPTH_FAIL, GL_STENCIL_BACK_FAIL, GL_STENCIL_BACK_PASS_DEPTH_PASS, GL_STENCIL_BACK_PASS_DEPTH_FAIL, or GL_STENCIL_BITS glIsEnabled() with argument GL_STENCIL_TEST
VERSION SUPPORT OpenGL Version Function / Feature Name 2.0 none;'>none;'>none;'>none;'>none;'>none;'>none;'>none;'>none;'>none;'>none;'>none;'>none;'> 2.1 3.0 3.1 3.2 3.3 4.0 4.1 4.2 4.3 4.4 4.5 glStencilOpSeparate ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
SEE ALSOglBlendFunc(), glDepthFunc(), glEnable(), glLogicOp(), glStencilFunc(), glStencilFuncSeparate(), glStencilMask(), glStencilMaskSeparate(), glStencilOp()
COPYRIGHTCopyright © 2006 Khronos Group. This material may be distributed subject to the terms and conditions set forth in the Open Publication License, v 1.0, 8 June 1999. http://opencontent.org/openpub/.
COPYRIGHT
Copyright © 1991-2006 Silicon Graphics, Inc.
0
Johanes Gumabo
Data Size : 27,920 byte
man-glStencilOpSeparate.3GBuild : 2024-12-05, 20:55 :
Visitor Screen : x
Visitor Counter ( page / site ) : 2 / 183,042
Visitor ID : :
Visitor IP : 18.221.240.14 :
Visitor Provider : AMAZON-02 :
Provider Position ( lat x lon ) : 39.962500 x -83.006100 : x
Provider Accuracy Radius ( km ) : 1000 :
Provider City : Columbus :
Provider Province : Ohio , : ,
Provider Country : United States :
Provider Continent : North America :
Visitor Recorder : Version :
Visitor Recorder : Library :
Online Linux Manual Page : Version : Online Linux Manual Page - Fedora.40 - march=x86-64 - mtune=generic - 24.12.05
Online Linux Manual Page : Library : lib_c - 24.10.03 - march=x86-64 - mtune=generic - Fedora.40
Online Linux Manual Page : Library : lib_m - 24.10.03 - march=x86-64 - mtune=generic - Fedora.40
Data Base : Version : Online Linux Manual Page Database - 24.04.13 - march=x86-64 - mtune=generic - fedora-38
Data Base : Library : lib_c - 23.02.07 - march=x86-64 - mtune=generic - fedora.36
Very long time ago, I have the best tutor, Wenzel Svojanovsky . If someone knows the email address of Wenzel Svojanovsky , please send an email to johanes_gumabo@yahoo.co.id .
If error, please print screen and send to johanes_gumabo@yahoo.co.id
Under development. Support me via PayPal.