irqbalance_selinux - Online Linux Manual PageSection : 8
Updated : 21-04-01
Source : irqbalance
Note : SELinux Policy irqbalance
NAMEirqbalance_selinux − Security Enhanced Linux Policy for the irqbalance processes
DESCRIPTIONSecurity-Enhanced Linux secures the irqbalance processes via flexible mandatory access control. The irqbalance processes execute with the irqbalance_t SELinux type. You can check if you have these processes running by executing the ps command with the −Z qualifier. For example: ps -eZ | grep irqbalance_t
ENTRYPOINTSThe irqbalance_t SELinux type can be entered via the irqbalance_exec_t file type. The default entrypoint paths for the irqbalance_t domain are the following: /usr/sbin/irqbalance
PROCESS TYPESSELinux defines process types (domains) for each process running on the system You can see the context of a process using the −Z option to ps Policy governs the access confined processes have to files. SELinux irqbalance policy is very flexible allowing users to setup their irqbalance processes in as secure a method as possible. The following process types are defined for irqbalance: irqbalance_tNote: semanage permissive -a irqbalance_t can be used to make the process type irqbalance_t permissive. SELinux does not deny access to permissive process types, but the AVC (SELinux denials) messages are still generated.
BOOLEANSSELinux policy is customizable based on least access required. irqbalance policy is extremely flexible and has several booleans that allow you to manipulate the policy and run irqbalance with the tightest access possible. If you want to allow all domains to execute in fips_mode, you must turn on the fips_mode boolean. Enabled by default. setsebool -P fips_mode 1
MANAGED FILESThe SELinux process type irqbalance_t can manage files labeled with the following file types. The paths listed are the default paths for these file types. Note the processes UID still need to have DAC permissions.
cluster_conf_t /etc/cluster(/.*)?
cluster_var_lib_t /var/lib/pcsd(/.*)?
/var/lib/cluster(/.*)?
/var/lib/openais(/.*)?
/var/lib/pengine(/.*)?
/var/lib/corosync(/.*)?
/usr/lib/heartbeat(/.*)?
/var/lib/heartbeat(/.*)?
/var/lib/pacemaker(/.*)?
cluster_var_run_t /var/run/crm(/.*)?
/var/run/cman_.*
/var/run/rsctmp(/.*)?
/var/run/aisexec.*
/var/run/heartbeat(/.*)?
/var/run/pcsd-ruby.socket
/var/run/corosync-qnetd(/.*)?
/var/run/corosync-qdevice(/.*)?
/var/run/corosync.pid
/var/run/cpglockd.pid
/var/run/rgmanager.pid
/var/run/cluster/rgmanager.sk
irqbalance_var_run_t /var/run/irqbalance.*
root_t /sysroot/ostree/deploy/.*-atomic/deploy(/.*)?
/
/initrd
FILE CONTEXTSSELinux requires files to have an extended attribute to define the file type. You can see the context of a file using the −Z option to ls Policy governs the access confined processes have to these files. SELinux irqbalance policy is very flexible allowing users to setup their irqbalance processes in as secure a method as possible. STANDARD FILE CONTEXT SELinux defines the file context types for the irqbalance, if you wanted to store files with these types in a diffent paths, you need to execute the semanage command to sepecify alternate labeling and then use restorecon to put the labels on disk. semanage fcontext -a -t irqbalance_var_run_t '/srv/myirqbalance_content(/.*)?'
restorecon -R -v /srv/myirqbalance_content Note: SELinux often uses regular expressions to specify labels that match multiple files. The following file types are defined for irqbalance: irqbalance_exec_t- Set files with the irqbalance_exec_t type, if you want to transition an executable to the irqbalance_t domain. irqbalance_initrc_exec_t- Set files with the irqbalance_initrc_exec_t type, if you want to transition an executable to the irqbalance_initrc_t domain. irqbalance_var_run_t- Set files with the irqbalance_var_run_t type, if you want to store the irqbalance files under the /run or /var/run directory. Note: File context can be temporarily modified with the chcon command. If you want to permanently change the file context you need to use the semanage fcontext command. This will modify the SELinux labeling database. You will need to use restorecon to apply the labels.
COMMANDSsemanage fcontext can also be used to manipulate default file context mappings. semanage permissive can also be used to manipulate whether or not a process type is permissive. semanage module can also be used to enable/disable/install/remove policy modules. semanage boolean can also be used to manipulate the booleans system-config-selinux is a GUI tool available to customize SELinux policy settings.
AUTHORThis manual page was auto-generated using sepolicy manpage".
SEE ALSOselinux(8), irqbalance(8), semanage(8), restorecon(8), chcon(1), sepolicy(8), setsebool(8) 0
Johanes Gumabo
Data Size : 15,104 byte
man-irqbalance_selinux.8Build : 2024-12-05, 20:55 :
Visitor Screen : x
Visitor Counter ( page / site ) : 3 / 184,206
Visitor ID : :
Visitor IP : 3.22.242.169 :
Visitor Provider : AMAZON-02 :
Provider Position ( lat x lon ) : 39.962500 x -83.006100 : x
Provider Accuracy Radius ( km ) : 1000 :
Provider City : Columbus :
Provider Province : Ohio , : ,
Provider Country : United States :
Provider Continent : North America :
Visitor Recorder : Version :
Visitor Recorder : Library :
Online Linux Manual Page : Version : Online Linux Manual Page - Fedora.40 - march=x86-64 - mtune=generic - 24.12.05
Online Linux Manual Page : Library : lib_c - 24.10.03 - march=x86-64 - mtune=generic - Fedora.40
Online Linux Manual Page : Library : lib_m - 24.10.03 - march=x86-64 - mtune=generic - Fedora.40
Data Base : Version : Online Linux Manual Page Database - 24.04.13 - march=x86-64 - mtune=generic - fedora-38
Data Base : Library : lib_c - 23.02.07 - march=x86-64 - mtune=generic - fedora.36
Very long time ago, I have the best tutor, Wenzel Svojanovsky . If someone knows the email address of Wenzel Svojanovsky , please send an email to johanes_gumabo@yahoo.co.id .
If error, please print screen and send to johanes_gumabo@yahoo.co.id
Under development. Support me via PayPal.