LVRENAME - Online Linux Manual PageSection : 8
Updated : LVM TOOLS 2.03.18(2)-git (2022-11-10)
Source : Red Hat, Inc.
NAME lvrename — Rename a logical volume
SYNOPSIS lvrename position_args
[ option_args ]
DESCRIPTION lvrename renames an existing LV or a historical LV (see lvremove for historical LV information.)
USAGE lvrename VG LV LV_new
[ COMMON_OPTIONS ] lvrename LV LV_new
[ COMMON_OPTIONS ] Common options for command: [ −A|−−autobackup y|n ]
[ −−noudevsync ]
[ −−reportformat basic|json|json_std ] Common options for lvm: [ −d|−−debug ]
[ −h|−−help ]
[ −q|−−quiet ]
[ −t|−−test ]
[ −v|−−verbose ]
[ −y|−−yes ]
[ −−commandprofile String ]
[ −−config String ]
[ −−devices PV ]
[ −−devicesfile String ]
[ −−driverloaded y|n ]
[ −−journal String ]
[ −−lockopt String ]
[ −−longhelp ]
[ −−nohints ]
[ −−nolocking ]
[ −−profile String ]
[ −−version ]
OPTIONS −A|−−autobackup y|n
Specifies if metadata should be backed up automatically after a change. Enabling this is strongly advised! See vgcfgbackup(8) for more information. −−commandprofile String
The command profile to use for command configuration. See lvm.conf(5) for more information about profiles. −−config String
Config settings for the command. These override lvm.conf(5) settings. The String arg uses the same format as lvm.conf(5), or may use section/field syntax. See lvm.conf(5) for more information about config. −d|−−debug ...
Set debug level. Repeat from 1 to 6 times to increase the detail of messages sent to the log file and/or syslog (if configured). −−devices PV
Restricts the devices that are visible and accessible to the command. Devices not listed will appear to be missing. This option can be repeated, or accepts a comma separated list of devices. This overrides the devices file. −−devicesfile String
A file listing devices that LVM should use. The file must exist in /etc/lvm/devices/ and is managed with the lvmdevices(8) command. This overrides the lvm.conf(5) devices/devicesfile and devices/use_devicesfile settings. −−driverloaded y|n
If set to no, the command will not attempt to use device-mapper. For testing and debugging. −h|−−help
Display help text. −−journal String
Record information in the systemd journal. This information is in addition to information enabled by the lvm.conf log/journal setting. command: record information about the command. output: record the default command output. debug: record full command debugging. −−lockopt String
Used to pass options for special cases to lvmlockd. See lvmlockd(8) for more information. −−longhelp
Display long help text. −−nohints
Do not use the hints file to locate devices for PVs. A command may read more devices to find PVs when hints are not used. The command will still perform standard hint file invalidation where appropriate. −−nolocking
Disable locking. Use with caution, concurrent commands may produce incorrect results. −−noudevsync
Disables udev synchronisation. The process will not wait for notification from udev. It will continue irrespective of any possible udev processing in the background. Only use this if udev is not running or has rules that ignore the devices LVM creates. −−profile String
An alias for −−commandprofile or −−metadataprofile, depending on the command. −q|−−quiet ...
Suppress output and log messages. Overrides −−debug and −−verbose. Repeat once to also suppress any prompts with answer 'no'. −−reportformat basic|json|json_std
Overrides current output format for reports which is defined globally by the report/output_format setting in lvm.conf(5). basic is the original format with columns and rows. If there is more than one report per command, each report is prefixed with the report name for identification. json produces report output in JSON format. json_std produces report output in JSON format which is more compliant with JSON standard. See lvmreport(7) for more information. −t|−−test
Run in test mode. Commands will not update metadata. This is implemented by disabling all metadata writing but nevertheless returning success to the calling function. This may lead to unusual error messages in multi-stage operations if a tool relies on reading back metadata it believes has changed but hasn't. −v|−−verbose ...
Set verbose level. Repeat from 1 to 4 times to increase the detail of messages sent to stdout and stderr. −−version
Display version information. −y|−−yes
Do not prompt for confirmation interactively but always assume the answer yes. Use with extreme caution. (For automatic no, see −qq.)
VARIABLES VG Volume Group name. See lvm(8) for valid names. LV Logical Volume name. See lvm(8) for valid names. An LV positional arg generally includes the VG name and LV name, e.g. VG/LV. String See the option description for information about the string content. Size[UNIT] Size is an input number that accepts an optional unit. Input units are always treated as base two values, regardless of capitalization, e.g. 'k' and 'K' both refer to 1024. The default input unit is specified by letter, followed by |UNIT. UNIT represents other possible input units: b|B is bytes, s|S is sectors of 512 bytes, k|K is KiB, m|M is MiB, g|G is GiB, t|T is TiB, p|P is PiB, e|E is EiB. (This should not be confused with the output control −−units, where capital letters mean multiple of 1000.)
ENVIRONMENT VARIABLES See lvm(8) for information about environment variables used by lvm. For example, LVM_VG_NAME can generally be substituted for a required VG parameter.
EXAMPLES Rename "lvold" to "lvnew":
lvrename /dev/vg02/lvold vg02/lvnew An alternate syntax to rename "lvold" to "lvnew":
lvrename vg02 lvold lvnew
SEE ALSO lvm(8), lvm.conf(5), lvmconfig(8), lvmdevices(8), pvchange(8), pvck(8), pvcreate(8), pvdisplay(8), pvmove(8), pvremove(8), pvresize(8), pvs(8), pvscan(8), vgcfgbackup(8), vgcfgrestore(8), vgchange(8), vgck(8), vgcreate(8), vgconvert(8), vgdisplay(8), vgexport(8), vgextend(8), vgimport(8), vgimportclone(8), vgimportdevices(8), vgmerge(8), vgmknodes(8), vgreduce(8), vgremove(8), vgrename(8), vgs(8), vgscan(8), vgsplit(8), lvcreate(8), lvchange(8), lvconvert(8), lvdisplay(8), lvextend(8), lvreduce(8), lvremove(8), lvrename(8), lvresize(8), lvs(8), lvscan(8), lvm−fullreport(8), lvm−lvpoll(8), blkdeactivate(8), lvmdump(8), dmeventd(8), lvmpolld(8), lvmlockd(8), lvmlockctl(8), cmirrord(8), lvmdbusd(8), fsadm(8), lvmsystemid(7), lvmreport(7), lvmraid(7), lvmthin(7), lvmcache(7) 0
Johanes Gumabo
Data Size : 35,454 byte
man-lvrename.8Build : 2024-12-05, 20:55 :
Visitor Screen : x
Visitor Counter ( page / site ) : 2 / 184,030
Visitor ID : :
Visitor IP : 18.219.81.129 :
Visitor Provider : AMAZON-02 :
Provider Position ( lat x lon ) : 39.962500 x -83.006100 : x
Provider Accuracy Radius ( km ) : 1000 :
Provider City : Columbus :
Provider Province : Ohio , : ,
Provider Country : United States :
Provider Continent : North America :
Visitor Recorder : Version :
Visitor Recorder : Library :
Online Linux Manual Page : Version : Online Linux Manual Page - Fedora.40 - march=x86-64 - mtune=generic - 24.12.05
Online Linux Manual Page : Library : lib_c - 24.10.03 - march=x86-64 - mtune=generic - Fedora.40
Online Linux Manual Page : Library : lib_m - 24.10.03 - march=x86-64 - mtune=generic - Fedora.40
Data Base : Version : Online Linux Manual Page Database - 24.04.13 - march=x86-64 - mtune=generic - fedora-38
Data Base : Library : lib_c - 23.02.07 - march=x86-64 - mtune=generic - fedora.36
Very long time ago, I have the best tutor, Wenzel Svojanovsky . If someone knows the email address of Wenzel Svojanovsky , please send an email to johanes_gumabo@yahoo.co.id .
If error, please print screen and send to johanes_gumabo@yahoo.co.id
Under development. Support me via PayPal.