lxc-start.1 - Online Linux Manual Page

lxc-start - Online Linux Manual PageSection : 1
Updated : 2021-01-26
Source :
Note :

NAMElxc-start − run an application inside a container.

SYNOPSIS.fi lxc-start {-n name} [-f config_file] [-c console_device] [-L console_logfile] [-d] [-F] [-p pid_file] [-s KEY=VAL] [-C] [--share-[net|ipc|uts] name|pid] [command]

DESCRIPTIONlxc-start runs the specified command inside the container specified by name. It will setup the container according to the configuration previously defined with the lxc-create command or with the configuration file parameter. If no configuration is defined, the default isolation is used. If no command is specified, lxc-start will use the command defined in lxc.init.cmd or if not set, the default "/sbin/init" command to run a system container.

OPTIONS\FC\fB\-d, \-\-daemon\fR\*(T> Run the container as a daemon. As the container has no more tty, if an error occurs nothing will be displayed, the log file can be used to check the error. (This is the default mode) \FC\fB\-F, \-\-foreground\fR\*(T> Run the container in the foreground. In this mode, the container console will be attached to the current tty and signals will be routed directly to the container. \FC\fB\-p, \-\-pidfile \fR\*(T>\fIpid_file\fR Create a file with the process id. \FC\fB\-f, \-\-rcfile \fR\*(T>\fIconfig_file\fR Specify the configuration file to configure the virtualization and isolation functionalities for the container. This configuration file if present will be used even if there is already a configuration file present in the previously created container (via lxc-create). \FC\fB\-c, \-\-console \fR\*(T>\fIconsole_device\fR Specify a device to use for the container's console, for example /dev/tty8. If this option is not specified the current terminal will be used unless \FC\fB\-d\fR\*(T> is specified. \FC\fB\-L, \-\-console\-log \fR\*(T>\fIconsole_logfile\fR Specify a file to log the container's console output to. \FC\fB\-s, \-\-define \fR\*(T>\fIKEY=VAL\fR Assign value VAL to configuration variable KEY. This overrides any assignment done in config_file. \FC\fB\-C, \-\-close\-all\-fds\fR\*(T> If any file descriptors are inherited, close them. If this option is not specified, then lxc-start will exit with failure instead. Note: --daemon implies --close-all-fds. \FC\fB\-\-share\-net \fR\*(T>\fIname|pid\fR Inherit a network namespace from a name container or a pid. The network namespace will continue to be managed by the original owner. The network configuration of the starting container is ignored and the up/down scripts won't be executed. \FC\fB\-\-share\-ipc \fR\*(T>\fIname|pid\fR Inherit an IPC namespace from a name container or a pid. \FC\fB\-\-share\-uts \fR\*(T>\fIname|pid\fR Inherit a UTS namespace from a name container or a pid. The starting LXC will not set the hostname, but the container OS may do it anyway.

COMMON OPTIONSThese options are common to most of lxc commands. \FC\fB\-?, \-h, \-\-help\fR\*(T> Print a longer usage message than normal. \FC\fB\-\-usage\fR\*(T> Give the usage message \FC\fB\-q, \-\-quiet\fR\*(T> mute on \FC\fB\-P, \-\-lxcpath=\fR\*(T>\fIPATH\fR Use an alternate container path. The default is /var/lib/lxc. \FC\fB\-o, \-\-logfile=\fR\*(T>\fIFILE\fR Output to an alternate log FILE. The default is no log. \FC\fB\-l, \-\-logpriority=\fR\*(T>\fILEVEL\fR Set log priority to LEVEL. The default log priority is \FCERROR\*(T>. Possible values are : \FCFATAL\*(T>, \*(T<CRIT\*(T>, \FCWARN\*(T>, \*(T<ERROR\*(T>, \FCNOTICE\*(T>, \*(T<INFO\*(T>, \FCDEBUG\*(T>. Note that this option is setting the priority of the events log in the alternate log file. It do not have effect on the ERROR events log on stderr. \FC\fB\-n, \-\-name=\fR\*(T>\fINAME\fR Use container identifier NAME. The container identifier format is an alphanumeric string. \FC\fB\-\-rcfile=\fR\*(T>\fIFILE\fR Specify the configuration file to configure the virtualization and isolation functionalities for the container. This configuration file if present will be used even if there is already a configuration file present in the previously created container (via lxc-create). \FC\fB\-\-version\fR\*(T> Show the version number.

DIAGNOSTICThe container is busy The specified container is already running an application. You should stop it before reuse this container or create a new one.

SEE ALSOlxc(7), lxc-create(1), lxc-copy(1), lxc-destroy(1), lxc-start(1), lxc-stop(1), lxc-execute(1), lxc-console(1), lxc-monitor(1), lxc-wait(1), lxc-cgroup(1), lxc-ls(1), lxc-info(1), lxc-freeze(1), lxc-unfreeze(1), lxc-attach(1), lxc.conf(5)

AUTHORDaniel Lezcano <\FCdaniel.lezcano@free.fr\*(T>> 0

Johanes Gumabo

Data Size : 18,007 byte
man-lxc-start.1Build : 2024-12-05, 20:55 :
Visitor Screen : x
Visitor Counter ( page / site ) : 4 / 191,537
Visitor ID : :
Visitor IP : 3.143.24.110 :
Visitor Provider : AMAZON-02 :
Provider Position ( lat x lon ) : 39.962500 x -83.006100 : x
Provider Accuracy Radius ( km ) : 1000 :
Provider City : Columbus :
Provider Province : Ohio , : ,
Provider Country : United States :
Provider Continent : North America :
Visitor Recorder : Version :
Visitor Recorder : Library :
Online Linux Manual Page : Version : Online Linux Manual Page - Fedora.40 - march=x86-64 - mtune=generic - 24.12.05
Online Linux Manual Page : Library : lib_c - 24.10.03 - march=x86-64 - mtune=generic - Fedora.40
Online Linux Manual Page : Library : lib_m - 24.10.03 - march=x86-64 - mtune=generic - Fedora.40
Data Base : Version : Online Linux Manual Page Database - 24.04.13 - march=x86-64 - mtune=generic - fedora-38
Data Base : Library : lib_c - 23.02.07 - march=x86-64 - mtune=generic - fedora.36

Very long time ago, I have the best tutor, Wenzel Svojanovsky . If someone knows the email address of Wenzel Svojanovsky , please send an email to johanes_gumabo@yahoo.co.id .

If error, please print screen and send to johanes_gumabo@yahoo.co.id
Under development. Support me via PayPal.