MBIMCLI - Online Linux Manual Page

Section : 1
Updated : January 2023
Source : mbimcli 1.28.2
Note : User Commands
NAMEmbimcli − Control MBIM devices
DESCRIPTION
Usage:mbimcli [OPTIONā​.¦] − Control MBIM devices
Help Options:−h, −−help  Show help options −−help−all  Show all help options −−help−basic−connect  Show Basic Connect Service options −−help−phonebook  Show Phonebook Service options −−help−dss  Show Device Service Stream options −−help−ms−firmware−id  Show Microsoft Firmware ID Service options −−help−ms−host−shutdown  Show Microsoft Host Shutdown Service options −−help−ms−sar  Show Microsoft SAR Service options −−help−atds  Show AT&T Device Service options −−help−intel−firmware−update  Show Intel Firmware Update Service options −−help−ms−basic−connect−extensions  Show Microsoft Basic Connect Extensions Service options −−help−quectel  Show Quectel Service options −−help−link−management  Show link management specific options −−help−intel−thermal−rf  Show Intel Thermal RF Service options −−help−ms−voice−extensions  Show Microsoft Voice Extensions Service options −−help−ms−uicc−low−level−access  Show Microsoft UICC Low Level Access Service options −−help−intel−mutual−authentication  Show Intel mutual authentication Service options −−help−intel−tools  Show Intel 5G tools options
Basic Connect options:−−query−device−caps  Query device capabilities −−query−subscriber−ready−status  Query subscriber ready status −−query−radio−state  Query radio state −−set−radio−state=[(on|off)]  Set radio state −−query−device−services  Query device services −−query−pin−state  Query PIN state −−enter−pin=[(PIN type),(current PIN)]  Enter PIN (PIN type is optional, defaults to PIN1, allowed options: (pin1,network−pin,network−subset−pin,service−provider−pin,corporate−pin) −−change−pin=[(current PIN),(new PIN)]  Change PIN −−enable−pin=[(current PIN)]  Enable PIN −−disable−pin=[(PIN type),(current PIN)]  Disable PIN (PIN type is optional, see enter−pin for details) −−enter−puk=[(PUK type),(PUK),(new PIN)]  Enter PUK (PUK type is optional, defaults to PUK1, allowed options: (puk1,network−puk,network−subset−puk,service−provider−puk,corporate−puk) −−query−pin−list  Query PIN list −−query−home−provider  Query home provider −−query−preferred−providers  Query preferred providers −−query−visible−providers  Query visible providers −−query−registration−state  Query registration state −−register−automatic  Launch automatic registration −−query−signal−state  Query signal state −−query−packet−service−state  Query packet service state −−attach−packet−service  Attach to the packet service −−detach−packet−service  Detach from the packet service −−query−connection−state=[SessionID]  Query connection state (SessionID is optional, defaults to 0) −−connect=["key=value,..."]  Connect (allowed keys: session−id, access−string, ip−type, auth, username, password, compression, context−type) −−query−ip−configuration=[SessionID]  Query IP configuration (SessionID is optional, defaults to 0) −−disconnect=[SessionID]  Disconnect (SessionID is optional, defaults to 0) −−query−packet−statistics  Query packet statistics −−query−ip−packet−filters=[SessionID]  Query IP packet filters (SessionID is optional, defaults to 0) −−set−ip−packet−filters=["key=value,..."]  Set IP packet filters (allowed keys: session−id, packet−filter, packet−mask, filter−id) −−query−provisioned−contexts  Query provisioned contexts −−set−provisioned−contexts=["key=value,..."]  Set provisioned contexts (allowed keys: context−id, context−type, auth, compression, username, password, access−string, provider−id) −−set−signal−state=["key=value,..."]  Set signal state (allowed keys: signal−strength−interval, rssi−threshold, error−rate−threshold) −−set−network−idle−hint=[(enabled|disabled)]  Set network idle hint −−query−network−idle−hint  Query network idle hint −−set−emergency−mode=[(on|off)]  Set emergency mode −−query−emergency−mode  Query emergency mode −−set−service−activation=[Data]  Set service activation
Phonebook options:−−phonebook−query−configuration  Query the phonebook configuration −−phonebook−read=[(Phonebook index)]  Read phonebook entry with given index −−phonebook−read−all  Read all phonebook entries −−phonebook−write=[(Name),(Number)[,(Index)]]  Add new phonebook entry or update an existing one −−phonebook−delete=[(Phonebook index)]  Delete phonebook entry with given index −−phonebook−delete−all  Delete all phonebook entries
Device Service Stream options:−−dss−connect=[(UUID),(Session ID)]  Connect DSS session −−dss−disconnect=[(UUID),(Session ID)]  Disconnect DSS session
Microsoft Firmware ID options:−−ms−query−firmware−id  Query firmware ID
Microsoft Host Shutdown options:−−ms−notify−host−shutdown  Notify that host is shutting down
Microsoft SAR options:−−ms−set−sar−config=[(device|os),(enabled|disabled)[,[{antenna_index,backoff_index}...]]]  Set SAR config −−ms−query−sar−config  Query SAR config −−ms−set−transmission−status=[(enabled|disabled),(timer)]  Set transmission status and hysteresis timer (in seconds) −−ms−query−transmission−status  Query transmission status
AT&T Device Service options:−−atds−query−signal  Query signal info −−atds−query−location  Query cell location
Intel Firmware Update Service options:−−intel−modem−reboot=[(Boot Mode),(Timeout)]  Reboot modem. Boot mode and timeout arguments only required if MBIMEx >= 2.0.
Microsoft Basic Connect Extensions options:−−ms−query−pco=[SessionID]  Query PCO value (SessionID is optional, defaults to 0) −−ms−query−lte−attach−configuration  Query LTE attach configuration −−ms−query−lte−attach−info  Query LTE attach status information −−ms−query−sys−caps  Query system capabilities −−ms−query−device−caps  Query device capabilities −−ms−query−slot−info−status=[SlotIndex]  Query slot information status −−ms−set−device−slot−mappings=[(SlotIndex)[,(SlotIndex)[,...]]]  Set device slot mappings for each executor −−ms−query−device−slot−mappings  Query device slot mappings −−ms−query−location−info−status  Query location info status −−ms−set−provisioned−contexts=["key=value,..."]  Set provisioned contexts (allowed keys: operation, context−type, ip−type, state, roaming−control, media−type, source, auth, compression, username, password, access−string) −−ms−query−provisioned−contexts  Query provisioned contexts −−ms−query−base−stations−info  Query base stations info −−ms−query−version=[(MBIM version),(MBIM extended version)]  Exchange supported version information. Since MBIMEx v2.0. −−ms−query−registration−parameters  Query registration parameters. Since MBIMEx v3.0. −−ms−set−registration−parameters=["key=value,..."]  Set registration parameters (required keys: mico−mode, drx−cycle, ladn−info, default−pdu−activation−hint, re−register−if−needed). Since MBIMEx v3.0. −−ms−query−modem−configuration  Query modem configuration. Since MBIMEx v3.0. −−ms−query−wake−reason  Query wake reason. Since MBIMEx v3.0.
Quectel options:−−quectel−query−radio−state  Query radio state −−quectel−set−radio−state=[(on)]  Set radio state
Link management options:−−link−list=[IFACE]  List links created from a given interface −−link−add=[iface=IFACE,prefix=PREFIX[,session−id=N]]  Create new network interface link −−link−delete=IFACE  Delete a given network interface link −−link−delete−all=[IFACE]  Delete all network interface links from the given interface
Intel Thermal RF Service options:−−intel−query−rfim  Query RFIM frequency information −−intel−set−rfim=[(on|off)]  Enable or disable RFIM (disabled by default)
Microsoft Voice Extensions Service options:−−ms−query−nitz  Query network identity and time zone
Microsoft UICC Low Level Access Service options:−−ms−query−uicc−application−list  Query UICC application list −−ms−query−uicc−file−status=["key=value,..."]  Query UICC file status (allowed keys: application−id, file−path) −−ms−query−uicc−read−binary=["key=value,..."]  Read UICC binary file (allowed keys: application−id, file−path, read−offset, read−size, local−pin and data) −−ms−query−uicc−read−record=["key=value,..."]  Read UICC record file (allowed keys: application−id, file−path, record−number, local−pin and data) −−ms−set−uicc−open−channel=["key=value,..."]  Set UICC open channel (allowed keys: application−id, selectp2arg, channel−group) −−ms−set−uicc−close−channel=["key=value,..."]  Set UICC close channel (allowed keys: channel, channel−group) −−ms−query−uicc−atr  Query UICC atr −−ms−set−uicc−apdu=["key=value,..."]  Set UICC apdu (allowed keys: channel, secure−message, classbyte−type, command) −−ms−set−uicc−reset=[(Pass Through Action)]  Set UICC reset −−ms−query−uicc−reset  Query UICC reset −−ms−set−uicc−terminal−capability=["key=value,..."]  Set UICC terminal capability (allowed keys: terminal−capability) −−ms−query−uicc−terminal−capability  Query UICC terminal capability
Intel mutual authentication Service options:−−query−fcc−lock  Query FCC lock information −−set−fcc−lock=[(ResponsePresent),(Response)]  Set FCC lock information Intel 5G tools options −−set−trace−config=[(TraceCmd)|(TraceValue)]  Set trace configuration −−query−trace−config=[(TraceCmd)]  Query trace configuration
Application Options:−d, −−device=[PATH]  Specify device path −p, −−device−open−proxy  Request to use the 'mbim−proxy' proxy −−device−open−ms−mbimex−v2  Request to enable Microsoft MBIMEx v2.0 support −−device−open−ms−mbimex−v3  Request to enable Microsoft MBIMEx v3.0 support −−no−open=[Transaction ID]  Do not explicitly open the MBIM device before running the command −−no−close  Do not close the MBIM device after running the command −−noop  Don't run any command −v, −−verbose  Run action with verbose logs, including the debug ones −−verbose−full  Run action with verbose logs, including the debug ones and personal info −−silent  Run action with no logs; not even the error/warning ones −V, −−version  Print version
COPYRIGHTCopyright © 2013−2021 Aleksander Morgado License GPLv2+: GNU GPL version 2 or later <http://gnu.org/licenses/gpl−2.0.html>
This is free software: you are free to change and redistribute it. There is NO WARRANTY, to the extent permitted by law.
SEE ALSOThe full documentation for mbimcli is maintained as a Texinfo manual. If the info and mbimcli programs are properly installed at your site, the command info mbimcli should give you access to the complete manual. 0
Johanes Gumabo
Data Size   :   66,710 byte
man-mbimcli.1Build   :   2025-03-22, 13:26   :  
Visitor Screen   :   x
Visitor Counter ( page / site )   :   56 / 5,717,571
Visitor ID   :     :  
Visitor IP   :   216.73.216.104   :  
Visitor Provider   :   Amazon.com, Inc.   :  
Provider Position ( lat x lon )   :   39.962500 x -83.006100   :   x
Provider Accuracy Radius ( km )   :   20   :  
Provider City   :   Columbus   :  
Provider Province   :   Ohio ,   :   ,
Provider Country   :   United States   :  
Provider Continent   :   North America   :  
Visitor Recorder   :   Version   :  
Visitor Recorder   :   Library   :  
Online Linux Manual Page   :   Version   :   Online Linux Manual Page - Fedora.40 - march=x86-64 - mtune=generic - 25.03.22
Online Linux Manual Page   :   Library   :   lib_c - 24.10.03 - march=x86-64 - mtune=generic - Fedora.40
Online Linux Manual Page   :   Library   :   lib_m - 24.10.03 - march=x86-64 - mtune=generic - Fedora.40
Data Base   :   Version   :   Online Linux Manual Page Database - 24.04.13 - march=x86-64 - mtune=generic - fedora-38
Data Base   :   Library   :   lib_c - 23.02.07 - march=x86-64 - mtune=generic - fedora.36
Very long time ago, I have the best tutor, Wenzel Svojanovsky. If someone knows the email address of Wenzel Svojanovsky, please send an email to johanesgumabo@gmail.com.
If error, please print screen and send to johanes_gumabo@yahoo.co.id
Under development. Support me via PayPal.