openconnect.8 - Online Linux Manual Page

OPENCONNECT - Online Linux Manual PageSection : 8

NAMEopenconnect − Multi-protocol VPN client, for Cisco AnyConnect VPNs and others

SYNOPSISopenconnect [ −−config configfile ] [ −b,−−background ] [ −−pid−file pidfile ] [ −c,−−certificate cert ] [ −e,−−cert−expire−warning days ] [ −k,−−sslkey key ] [ −C,−−cookie cookie ] [ −−cookie−on−stdin ] [ −−compression MODE ] [ −d,−−deflate ] [ −D,−−no−deflate ] [ −−force−dpd interval ] [ −−force−trojan interval ] [ −F,−−form−entry form:opt=value ] [ −g,−−usergroup group ] [ −h,−−help ] [ −−http−auth methods ] [ −i,−−interface ifname ] [ −l,−−syslog ] [ −−timestamp ] [ −−passtos ] [ −U,−−setuid user ] [ −−csd−user user ] [ −m,−−mtu mtu ] [ −−base−mtu mtu ] [ −p,−−key−password pass ] [ −P,−−proxy proxyurl ] [ −−proxy−auth methods ] [ −−no−proxy ] [ −−libproxy ] [ −−key−password−from−fsid ] [ −q,−−quiet ] [ −Q,−−queue−len len ] [ −s,−−script vpnc−script ] [ −S,−−script−tun ] [ −u,−−user name ] [ −V,−−version ] [ −v,−−verbose ] [ −x,−−xmlconfig config ] [ −−authgroup group ] [ −−authenticate ] [ −−cookieonly ] [ −−printcookie ] [ −−cafile file ] [ −−disable−ipv6 ] [ −−dtls−ciphers list ] [ −−dtls12−ciphers list ] [ −−dtls−local−port port ] [ −−dump−http−traffic ] [ −−no−system−trust ] [ −−pfs ] [ −−no−dtls ] [ −−no−http−keepalive ] [ −−no−passwd ] [ −−no−xmlpost ] [ −−non−inter ] [ −−passwd−on−stdin ] [ −−protocol proto ] [ −−token−mode mode ] [ −−token−secret {secret[,counter]|@file} ] [ −−reconnect−timeout seconds ] [ −−resolve host:ip ] [ −−servercert sha1 ] [ −−useragent string ] [ −−version−string string ] [ −−local−hostname string ] [ −−os string ] [−−server] [https://]host[:port][/group]

DESCRIPTIONThe program openconnect connects to VPN servers which use standard TLS/SSL, DTLS, and ESP protocols for data transport. It was originally written to support Cisco "AnyConnect" VPN servers, and has since been extended with experimental support for Juniper Network Connect (−−protocol=nc) Junos Pulse VPN servers, (−−protocol=pulse) PAN GlobalProtect VPN servers, (−−protocol=gp) F5 Big-IP VPN servers, (−−protocol=f5) Fortinet Fortigate VPN servers, (−−protocol=fortinet) and Array Networks SSL VPN servers, (−−protocol=array) The connection happens in two phases. First there is a simple HTTPS connection over which the user authenticates somehow − by using a certificate, or password or SecurID, etc. Having authenticated, the user is rewarded with an authentication cookie which can be used to make the real VPN connection. The second phase uses that cookie to connect to a tunnel via HTTPS, and data packets can be passed over the resulting connection. When possible, a UDP tunnel is also configured: AnyConnect uses DTLS, while Juniper and GlobalProtect use UDP-encapsulated ESP. The UDP tunnel may be disabled with −−no−dtls, but is preferred when correctly supported by the server and network for performance reasons. (TCP performs poorly and unreliably over TCP-based tunnels; see http://sites.inka.de/~W1011/devel/tcp-tcp.html.)

OPTIONS−−config=CONFIGFILE Read further options from CONFIGFILE before continuing to process options from the command line. The file should contain long-format options as would be accepted on the command line, but without the two leading −− dashes. Empty lines, or lines where the first non-space character is a # character, are ignored. Any option except the config option may be specified in the file. −b,−−background Continue in background after startup −−pid−file=PIDFILE Save the pid to PIDFILE when backgrounding −c,−−certificate=CERT [,−−mca-certificate=CERT] Use SSL client certificate CERT which may be either a file name or, if OpenConnect has been built with an appropriate version of GnuTLS, a PKCS#11 URL. The −−mca-certificate option sets the secondary certificate for multi-certificate authentication (according to Cisco's terminology, the SSL client certificate is called the "machine" certificate, and the second certificate is called the "user" certificate). −e,−−cert−expire−warning=DAYS Give a warning when SSL client certificate has DAYS left before expiry −k,−−sslkey=KEY [,−−mca−key=KEY] Use SSL private key KEY which may be either a file name or, if OpenConnect has been built with an appropriate version of GnuTLS, a PKCS#11 URL. The −−mca−key option sets the private key for the secondary certificate (see −−mca−certificate ). −C,−−cookie=COOKIE Use authentication cookie COOKIE. −−cookie−on−stdin Read cookie from standard input. −d,−−deflate Enable all compression, including stateful modes. By default, only stateless compression algorithms are enabled. −D,−−no−deflate Disable all compression. −−compression=MODE Set compression mode, where MODE is one of stateless, none, or all. By default, only stateless compression algorithms which do not maintain state from one packet to the next (and which can be used on UDP transports) are enabled. By setting the mode to all" stateful algorithms (currently only zlib deflate) can be enabled. Or all compression can be disabled by setting the mode to none. −−force−dpd=INTERVAL Use INTERVAL as Dead Peer Detection interval (in seconds). This will cause the client to use DPD at the specified interval even if the server hasn't requested it, or at a different interval from the one requested by the server. DPD mechanisms vary by protocol and by transport (TLS or DTLS/ESP), but are all functionally similar: they enable either the VPN client or the VPN server to transmit a signal to the peer, requesting an immediate reply which can be used to confirm that the link between the two peers is still working. −g,−−usergroup=GROUP Use GROUP as login UserGroup −F,−−form−entry=FORM:OPTION=VALUE Provide authentication form input, where FORM and OPTION are the identifiers from the form and the specific input field, and VALUE is the string to be filled in automatically. For example, the standard username field (also handled by the −−user option) could also be provided with this option thus: −−form−entry main:username=joebloggs. This option should not be used to enter passwords. −−passwd−on−stdin should be used for that purpose. Not only will this option expose the password value via the OpenConnect process's command line, but unlike −−passwd−on−stdin this option will not recognize the case of an incorrect password, and stop trying to re-enter it repeatedly. −h,−−help Display help text −−http−auth=METHODS Use only the specified methods for HTTP authentication to a server. By default, only Negotiate, NTLM and Digest authentication are enabled. Basic authentication is also supported but because it is insecure it must be explicitly enabled. The argument is a comma-separated list of methods to be enabled. Note that the order does not matter: OpenConnect will use Negotiate, NTLM, Digest and Basic authentication in that order, if each is enabled, regardless of the order specified in the METHODS string. −i,−−interface=IFNAME Use IFNAME for tunnel interface −l,−−syslog After tunnel is brought up, use syslog for further progress messages −−timestamp Prepend a timestamp to each progress message −−passtos Copy TOS / TCLASS of payload packet into DTLS and ESP packets. This is not set by default because it may leak information about the payload (for example, by differentiating voice/video traffic). −U,−−setuid=USER Drop privileges after connecting, to become user USER −−csd−user=USER Drop privileges during execution of trojan binary or script (CSD, TNCC, or HIP). −−csd−wrapper=SCRIPT Run SCRIPT instead of the trojan binary or script. −−force−trojan=INTERVAL Use INTERVAL as interval (in seconds) for repeat execution of Trojan binary or script, overriding default and/or server-set interval. −m,−−mtu=MTU Request MTU from server as the MTU of the tunnel. −−base−mtu=MTU Indicate MTU as the path MTU between client and server on the unencrypted network. Newer servers will automatically calculate the MTU to be used on the tunnel from this value. −p,−−key−password=PASS [,−−mca−key−password=PASS] Provide passphrase for certificate file, or SRK (System Root Key) PIN for TPM −−mca−key−password provides the passphrase for the secondary certificate (see −−mca−certificate ). −P,−−proxy=PROXYURL Use HTTP or SOCKS proxy for connection. A username and password can be provided in the given URL, and will be used for authentication. If authentication is required but no credentials are given, GSSAPI and automatic NTLM authentication using Samba's ntlm_auth helper tool may be attempted. −−proxy−auth=METHODS Use only the specified methods for HTTP authentication to a proxy. By default, only Negotiate, NTLM and Digest authentication are enabled. Basic authentication is also supported but because it is insecure it must be explicitly enabled. The argument is a comma-separated list of methods to be enabled. Note that the order does not matter: OpenConnect will use Negotiate, NTLM, Digest and Basic authentication in that order, if each is enabled, regardless of the order specified in the METHODS string. −−no−proxy Disable use of proxy −−libproxy Use libproxy to configure proxy automatically (when built with libproxy support) −−key−password−from−fsid Passphrase for certificate file is automatically generated from the fsid of the file system on which it is stored. The fsid is obtained from the statvfs(2) or statfs(2) system call, depending on the operating system. On a Linux or similar system with GNU coreutils, the fsid used by this option should be equal to the output of the command: stat −−file−system −−printf=%i\\n $CERTIFICATEIt is not the same as the 128−bit UUID of the file system. −q,−−quiet Less output −Q,−−queue−len=LEN Set packet queue limit to LEN packets. The default is 10. A high value may allow better overall bandwidth but at a cost of latency. If you run Voice over IP or other interactive traffic over the VPN, you don't want those packets to be queued behind thousands of other large packets which are part of a bulk transfer. This option sets the maximum inbound and outbound packet queue sizes in OpenConnect itself, which control how many packets will be sent and received in a single batch, as well as affecting other buffering such as the socket send buffer (SO_SNDBUF) for network connections and the OS tunnel device. Ultimately, the right size for a queue is "just enough packets that it never quite gets empty before more are pushed to it". Any higher than that is simply introducing bufferbloat and additional latency with no benefit. With the default of 10, we are able to saturate a single Gigabit Ethernet from modest hardware, which is more than enough for most VPN users. If OpenConnect is built with vhost-net support, it will only be used if the queue length is set to 16 or more. This is because vhost-net introduces a small amount of additional latency, but improves total bandwidth quite considerably for those operating at high traffic rates. Thus it makes sense to use it when the user has indicated a preference for bandwidth over latency, by increasing the queue size. −s,−−script=SCRIPT Invoke SCRIPT to configure the network after connection. Without this, routing and name service are unlikely to work correctly. The script is expected to be compatible with the vpnc−script which is shipped with the "vpnc" VPN client. See https://www.infradead.org/openconnect/vpnc-script.html for more information. This version of OpenConnect is configured to use /etc/vpnc/vpnc-script by default. On Windows, a relative directory for the default script will be handled as starting from the directory that the openconnect executable is running from, rather than the current directory. The script will be invoked with the command-based script host cscript.exe. −S,−−script−tun Pass traffic to 'script' program over a UNIX socket, instead of to a kernel tun/tap device. This allows the VPN IP traffic to be handled entirely in userspace, for example by a program which uses lwIP to provide SOCKS access into the VPN. −−server=[https://]HOST[:PORT][/GROUP] Define the VPN server as a simple HOST or as an URL containing the HOST and optionally the PORT number and the login GROUP or realm. As an alternative, define the VPN server as non-option command line argument. −u,−−user=NAME Set login username to NAME −V,−−version Report version number −v,−−verbose More output (may be specified multiple times for additional output) −x,−−xmlconfig=CONFIG XML config file −−authgroup=GROUP Choose authentication login selection −−authenticate Authenticate to the VPN, output the information needed to make the connection in a form which can be used to set shell environment variables, and then exit. When invoked with this option, OpenConnect will not actually create the VPN connection or configure a tunnel interface, but if successful will print something like the following to stdout: COOKIE='3311180634@13561856@1339425499@B315A0E29D16C6FD92EE...' HOST='10.0.0.1' CONNECT_URL='https://vpnserver.example.com' FINGERPRINT='469bb424ec8835944d30bc77c77e8fc1d8e23a42' RESOLVE='vpnserver.example.com:10.0.0.1'Thus, you can invoke openconnect as a non-privileged user (with access to the user's PKCS#11 tokens, etc.) for authentication, and then invoke openconnect separately to make the actual connection as root: eval `openconnect --authenticate https://vpnserver.example.com`; [ -n "$COOKIE" ] && echo "$COOKIE" | sudo openconnect --cookie-on-stdin $CONNECT_URL --servercert $FINGERPRINT --resolve $RESOLVEEarlier versions of OpenConnect produced only the HOST variable (containing the numeric server address), and not the CONNECT_URL or RESOLVE variables. Subsequently, we discovered that servers behind proxies may not respond correctly unless the correct DNS name is present in the connection phase, and we added support for VPN protocols where the server URL's path component may be significant in the connection phase, prompting the addition of CONNECT_URL and RESOLVE, and the recommendation to use them as described above. If you are not certain that you are invoking a newer version of OpenConnect which outputs these variables, use the following command-line (compatible with most Bourne shell derivatives) which will work with either a newer or older version: sudo openconnect --cookie-on-stdin ${CONNECT_URL:-$HOST} --servercert $FINGERPRINT ${RESOLVE:+--resolve=$RESOLVE}−−cookieonly Fetch and print cookie only; don't connect (this is essentially a subset of −−authenticate). −−printcookie Print cookie to stdout before connecting (see −−authenticate for the meaning of this cookie) −−cafile=FILE Additional CA file for server verification. By default, this simply causes OpenConnect to trust additional root CA certificate(s) in addition to those trusted by the system. Use −−no−system−trust to prevent OpenConnect from trusting the system default certificate authorities. −−no−system−trust Do not trust the system default certificate authorities. If this option is given, only certificate authorities given with the −−cafile option, if any, will be trusted automatically. −−disable−ipv6 Do not advertise IPv6 capability to server −−dtls−ciphers=LIST Set OpenSSL ciphers to support for DTLS −−dtls12−ciphers=LIST Set OpenSSL ciphers for Cisco's DTLS v1.2 −−dtls−local−port=PORT Use PORT as the local port for DTLS and UDP datagrams −−dump−http−traffic Enable verbose output of all HTTP requests and the bodies of all responses received from the server. −−pfs Enforces Perfect Forward Secrecy (PFS). That ensures that if the server's long-term key is compromised, any session keys established before the compromise will be unaffected. If this option is provided and the server does not support PFS in the TLS channel the connection will fail. PFS is available in Cisco ASA releases 9.1(2) and higher; a suitable cipher suite may need to be manually enabled by the administrator using the ssl encryption setting. −−no−dtls Disable DTLS and ESP −−no−http−keepalive Version 8.2.2.5 of the Cisco ASA software has a bug where it will forget the client's SSL certificate when HTTP connections are being re−used for multiple requests. So far, this has only been seen on the initial connection, where the server gives an HTTP/1.0 redirect response with an explicit Connection: Keep−Alive directive. OpenConnect as of v2.22 has an unconditional workaround for this, which is never to obey that directive after an HTTP/1.0 response. However, Cisco's support team has failed to give any competent response to the bug report and we don't know under what other circumstances their bug might manifest itself. So this option exists to disable ALL re−use of HTTP sessions and cause a new connection to be made for each request. If your server seems not to be recognizing your certificate, try this option. If it makes a difference, please report this information to the openconnect−devel@lists.infradead.org mailing list. −−no−passwd Never attempt password (or SecurID) authentication. −−no−xmlpost Do not attempt to post an XML authentication/configuration request to the server; use the old style GET method which was used by older clients and servers instead. This option is a temporary safety net, to work around potential compatibility issues with the code which falls back to the old method automatically. It causes OpenConnect to behave more like older versions (4.08 and below) did. If you find that you need to use this option, then you have found a bug in OpenConnect. Please see https://www.infradead.org/openconnect/mail.html and report this to the developers. −−allow−insecure−crypto The ancient, broken 3DES and RC4 ciphers are insecure; we explicitly disable them by default. However, some still-in-use VPN servers can't do any better. This option enables use of these insecure ciphers, as well as the use of SHA1 for server certificate validation. −−non−inter Do not expect user input; exit if it is required. −−passwd−on−stdin Read password from standard input −−protocol=PROTO Select VPN protocol PROTO to be used for the connection. Supported protocols are anyconnect for Cisco AnyConnect (the default), nc for experimental support for Juniper Network Connect (also supported by most Junos Pulse servers), pulse for experimental support for Junos Pulse, gp for experimental support for PAN GlobalProtect, f5 for experimental support for F5 Big-IP, fortinet for experimental support for Fortinet Fortigate, and array for experimental support for Array Networks SSL VPN. See https://www.infradead.org/openconnect/protocols.html for details on features and deficiencies of the individual protocols. OpenConnect does not yet support all of the authentication options used by Pulse, nor does it support Host Checker/TNCC with Pulse. If your Junos Pulse VPN is not yet supported with −−protocol=pulse, then −−protocol=nc may be a useful fallback option. −−token−mode=MODE Enable one-time password generation using the MODE algorithm. −−token−mode=rsa will call libstoken to generate an RSA SecurID tokencode, −−token−mode=totp will call liboath to generate an RFC 6238 time-based password, and −−token−mode=hotp will call liboath to generate an RFC 4226 HMAC-based password. Yubikey tokens which generate OATH codes in hardware are supported with −−token−mode=yubioath. −−token−mode=oidc will use the provided OpenIDConnect token as an RFC 6750 bearer token. −−token−secret={ SECRET[,COUNTER] | @FILENAME } The secret to use when generating one-time passwords/verification codes. Base 32-encoded TOTP/HOTP secrets can be used by specifying "base32:" at the beginning of the secret, and for HOTP secrets the token counter can be specified following a comma. RSA SecurID secrets can be specified as an Android/iPhone URI or a raw numeric CTF string (with or without dashes). For Yubikey OATH the token secret specifies the name of the credential to be used. If not provided, the first OATH credential found on the device will be used. For OIDC the secret is the bearer token to be used. FILENAME, if specified, can contain any of the above strings. Or, it can contain a SecurID XML (SDTID) seed. If this option is omitted, and −−token−mode is "rsa", libstoken will try to use the software token seed saved in ~/.stokenrc by the "stoken import" command. −−reconnect−timeout=SECONDS After disconnection or Dead Peer Detection, keep trying to reconnect for SECONDS. The default is 300 seconds, which means that openconnect can recover a VPN connection after a temporary network outage lasting up to 300 seconds. −−resolve=HOST:IP Automatically resolve the hostname HOST to IP instead of using the normal resolver to look it up. −−servercert=HASH Accept server's SSL certificate only if it matches the provided fingerprint. This option implies −−no−system−trust, and may be specified multiple times in order to accept multiple possible fingerprints. The allowed fingerprint types are SHA1, SHA256, and PIN-SHA256. They are distinguished by the 'sha1:', 'sha256:' and 'pin-sha256:' prefixes to the encoded hash. The first two are custom identifiers providing hex encoding of the peer's public key, while 'pin-sha256:' is the RFC7469 key PIN, which utilizes base64 encoding. To ease certain testing use-cases, a partial match of the hash will also be accepted, if it is at least 4 characters past the prefix. −−useragent=STRING Use STRING as 'User−Agent:' field value in HTTP header. (e.g. −−useragent 'Cisco AnyConnect VPN Agent for Windows 2.2.0133') −−version−string=STRING Use STRING as the software version reported to the head end. (e.g. −−version−string '2.2.0133') −−local−hostname=STRING Use STRING as 'X−CSTP−Hostname:' field value in HTTP header. For example −−local−hostname 'mypc', will advertise the value 'mypc' as the suggested hostname to point to the provided IP address. −−os=STRING OS type to report to gateway. Recognized values are: linux, linux−64, win, mac−intel, android, apple−ios. Reporting a different OS type may affect the dynamic access policy (DAP) applied to the VPN session. If the gateway requires CSD, it will also cause the corresponding CSD trojan binary to be downloaded, so you may need to use −−csd−wrapper if this code is not executable on the local machine.

SIGNALSIn the data phase of the connection, the following signals are handled: SIGINT / SIGTERM performs a clean shutdown by logging the session off, disconnecting from the gateway, and running the vpnc−script to restore the network configuration. SIGHUP disconnects from the gateway and runs the vpnc−script, but does not log the session off; this allows for reconnection later using −−cookie. SIGUSR1 writes progress message with detailed connection information and statistics. SIGUSR2 forces an immediate disconnection and reconnection; this can be used to quickly recover from LAN IP address changes.

LIMITATIONS Note that although IPv6 has been tested on all platforms on which openconnect is known to run, it depends on a suitable vpnc−script to configure the network. The standard vpnc−script shipped with vpnc 0.5.3 is not capable of setting up IPv6 routes; the one from https://gitlab.com/openconnect/vpnc−scripts will be required.