openipmicmd - Online Linux Manual PageSection : 1
Updated : 05/13/03
Source : OpenIPMI
Note : An IPMI Command Interface
NAMEopenipmicmd − An IPMI Command Interface
SYNOPSISopenipmicmd [−k entry-to-execute] <connection parms>
DESCRIPTIONThe openipmicmd program allows a user to execute direct IPMI commands. It can work with direct interface with the OpenIPMI driver or with IPMI LAN interfaces.
OPTIONS−k entry-to-execute Execute a single command an exit. <connectionparms> The parameters for the connection depend on the connection type. These are all described in openipmi_conparms (7)
COMMANDSOnce up, you can execute commands in the user interface. Note that commands and responses are asynchronous, you issue a command and the interface returns immediately. When the response comes back, it will be dumped on your console. That's a little strange looking, but IPMI is ansychronous underneath. Note that the −k option is synchronous, it will wait for the response or a timeout before returning. 0f lun netfn cmd [data1 [data2 ...]] Send a command to the BMC you are connected to. channel [ipmb] IPMB-addr lun netfn [seq] cmd [data1 [data2 ...]] Send a command to a device on the IPMB bus. The "ipmb" string is optional. The seq must be provided if the netfn is a response (an odd number). It must be the same sequence number that came in on the command in the "Command Sequence = seq" part of the command. channel 00 IPMB-addr lun netfn cmd [data1 [data2 ...]] Send a broadcast command to a device on the IPMB bus. channel lan handle remote-swid local-swid lun netfn cmd [data1 [data ...]] Send a command to a device over a LAN channel. Note that this not the same as a LAN connection. This sends a message through a local BMC to a remote system that is hooked up with a LAN connection. test_lat count command Executes the given commands (one of the previous commands) count times and gives the average time per command to execute. Note that "count" is hexadecimal. help Display some help. regcmd netfn cmd Register to receive the given command. If the driver receives an external command, it will print it out. This only works with system interface connections, it will not work on LAN connections. unregcmd netfn cmd Remove a command registration.
SEE ALSOipmi_ui(1), ipmilan(8), openipmi_conparms(7)
KNOWN PROBLEMSThe asychronous nature of the program can be annoying.
AUTHORCorey Minyard <cminyard@mvista.org> 0
Johanes Gumabo
Data Size : 12,866 byte
man-openipmicmd.1Build : 2024-12-05, 20:55 :
Visitor Screen : x
Visitor Counter ( page / site ) : 3 / 180,192
Visitor ID : :
Visitor IP : 52.14.173.116 :
Visitor Provider : AMAZON-02 :
Provider Position ( lat x lon ) : 39.962500 x -83.006100 : x
Provider Accuracy Radius ( km ) : 1000 :
Provider City : Columbus :
Provider Province : Ohio , : ,
Provider Country : United States :
Provider Continent : North America :
Visitor Recorder : Version :
Visitor Recorder : Library :
Online Linux Manual Page : Version : Online Linux Manual Page - Fedora.40 - march=x86-64 - mtune=generic - 24.12.05
Online Linux Manual Page : Library : lib_c - 24.10.03 - march=x86-64 - mtune=generic - Fedora.40
Online Linux Manual Page : Library : lib_m - 24.10.03 - march=x86-64 - mtune=generic - Fedora.40
Data Base : Version : Online Linux Manual Page Database - 24.04.13 - march=x86-64 - mtune=generic - fedora-38
Data Base : Library : lib_c - 23.02.07 - march=x86-64 - mtune=generic - fedora.36
Very long time ago, I have the best tutor, Wenzel Svojanovsky . If someone knows the email address of Wenzel Svojanovsky , please send an email to johanes_gumabo@yahoo.co.id .
If error, please print screen and send to johanes_gumabo@yahoo.co.id
Under development. Support me via PayPal.