OPENSSL-OCSP - Online Linux Manual PageSection : 1ossl
Updated : 2023-03-21
Source : 3.0.8
Note : OpenSSL

NAMEopenssl−ocsp − Online Certificate Status Protocol command

SYNOPSIS

OCSP Clientopenssl ocsp [−help] [−out file] [−issuer file] [−cert file] [−no_certs] [−serial n] [−signer file] [−signkey file] [−sign_other file] [−nonce] [−no_nonce] [−req_text] [−resp_text] [−text] [−reqout file] [−respout file] [−reqin file] [−respin file] [−url URL] [−host host:port] [−path] [−proxy [http[s]://][userinfo@]host[:port][/path]] [−no_proxy addresses] [−header] [−timeout seconds] [−VAfile file] [−validity_period n] [−status_age n] [−noverify] [−verify_other file] [−trust_other] [−no_intern] [−no_signature_verify] [−no_cert_verify] [−no_chain] [−no_cert_checks] [−no_explicit] [−port num] [−ignore_err]

OCSP Serveropenssl ocsp [−index file] [−CA file] [−rsigner file] [−rkey file] [−passin arg] [−rother file] [−rsigopt nm:v] [−rmd digest] [−badsig] [−resp_no_certs] [−nmin n] [−ndays n] [−resp_key_id] [−nrequest n] [−multi process-count] [−rcid digest] [digest] [−CAfile file] [−no−CAfile] [−CApath dir] [−no−CApath] [−CAstore uri] [−no−CAstore] [−allow_proxy_certs] [−attime timestamp] [−no_check_time] [−check_ss_sig] [−crl_check] [−crl_check_all] [−explicit_policy] [−extended_crl] [−ignore_critical] [−inhibit_any] [−inhibit_map] [−partial_chain] [−policy arg] [−policy_check] [−policy_print] [−purpose purpose] [−suiteB_128] [−suiteB_128_only] [−suiteB_192] [−trusted_first] [−no_alt_chains] [−use_deltas] [−auth_level num] [−verify_depth num] [−verify_email email] [−verify_hostname hostname] [−verify_ip ip] [−verify_name name] [−x509_strict] [−issuer_checks] [−provider name] [−provider−path path] [−propquery propq]

DESCRIPTIONThe Online Certificate Status Protocol (OCSP) enables applications to determine the (revocation) state of an identified certificate (RFC 2560). This command performs many common OCSP tasks. It can be used to print out requests and responses, create requests and send queries to an OCSP responder and behave like a mini OCSP server itself.

OPTIONSThis command operates as either a client or a server. The options are described below, divided into those two modes.

OCSP Client Options−help Print out a usage message. −out filename specify output filename, default is standard output. −issuer filename This specifies the current issuer certificate. This option can be used multiple times. This option MUST come before any −cert options. −cert filename Add the certificate filename to the request. The issuer certificate is taken from the previous −issuer option, or an error occurs if no issuer certificate is specified. −no_certs Don't include any certificates in signed request. −serial num Same as the −cert option except the certificate with serial number ​num is added to the request. The serial number is interpreted as a decimal integer unless preceded by \*(C`0x\*(C'\fR. Negative integers can also be specified by preceding the value by a \*(C`\-\*(C'\fR sign. −signer filename, −signkey filename Sign the OCSP request using the certificate specified in the −signer option and the private key specified by the −signkey option. If the −signkey option is not present then the private key is read from the same file as the certificate. If neither option is specified then the OCSP request is not signed. −sign_other filename Additional certificates to include in the signed request. The input can be in PEM, DER, or PKCS#12 format. −nonce, −no_nonce Add an OCSP nonce extension to a request or disable OCSP nonce addition. Normally if an OCSP request is input using the −reqin option no nonce is added: using the −nonce option will force addition of a nonce. If an OCSP request is being created (using −cert and −serial options) a nonce is automatically added specifying −no_nonce overrides this. −req_text, −resp_text, −text Print out the text form of the OCSP request, response or both respectively. −reqout file, −respout file Write out the DER encoded certificate request or response to file. −reqin file, −respin file Read OCSP request or response file from file. These option are ignored if OCSP request or response creation is implied by other options (for example with −serial, −cert and −host options). −url responder_url Specify the responder URL. Both HTTP and HTTPS (SSL/TLS) URLs can be specified. The optional userinfo and fragment components are ignored. Any given query component is handled as part of the path component. −host hostname:port, −path pathname If the −host option is present then the OCSP request is sent to the host ​hostname on port port. The −path option specifies the HTTP pathname to use or "/" by default. This is equivalent to specifying −url with scheme http:// and the given hostname, port, and pathname. −proxy [http[s]://][userinfo@]host[:port][/path] The HTTP(S) proxy server to use for reaching the OCSP server unless −no_proxy applies, see below. The proxy port defaults to 80 or 443 if the scheme is \*(C`https\*(C'\fR; apart from that the optional \*(C`http://\*(C'\fR or \f(CW\*(C`https://\*(C'\fR prefix is ignored, as well as any userinfo and path components. Defaults to the environment variable \*(C`http_proxy\*(C'\fR if set, else \f(CW\*(C`HTTP_PROXY\*(C'\fR in case no TLS is used, otherwise \*(C`https_proxy\*(C'\fR if set, else \f(CW\*(C`HTTPS_PROXY\*(C'\fR. −no_proxy addresses List of IP addresses and/or DNS names of servers not to use an HTTP(S) proxy for, separated by commas and/or whitespace (where in the latter case the whole argument must be enclosed in "..."). Default is from the environment variable \*(C`no_proxy\*(C'\fR if set, else \f(CW\*(C`NO_PROXY\*(C'\fR. −header name=value Adds the header name with the specified value to the OCSP request that is sent to the responder. This may be repeated. −timeout seconds Connection timeout to the OCSP responder in seconds. On POSIX systems, when running as an OCSP responder, this option also limits the time that the responder is willing to wait for the client request. This time is measured from the time the responder accepts the connection until the complete request is received. −verify_other file File or URI containing additional certificates to search when attempting to locate the OCSP response signing certificate. Some responders omit the actual signer's certificate from the response: this option can be used to supply the necessary certificate in such cases. The input can be in PEM, DER, or PKCS#12 format. −trust_other The certificates specified by the −verify_other option should be explicitly trusted and no additional checks will be performed on them. This is useful when the complete responder certificate chain is not available or trusting a root CA is not appropriate. −VAfile file File or URI containing explicitly trusted responder certificates. Equivalent to the −verify_other and −trust_other options. The input can be in PEM, DER, or PKCS#12 format. −noverify Don't attempt to verify the OCSP response signature or the nonce values. This option will normally only be used for debugging since it disables all verification of the responders certificate. −no_intern Ignore certificates contained in the OCSP response when searching for the signers certificate. With this option the signers certificate must be specified with either the −verify_other or −VAfile options. −no_signature_verify Don't check the signature on the OCSP response. Since this option tolerates invalid signatures on OCSP responses it will normally only be used for testing purposes. −no_cert_verify Don't verify the OCSP response signers certificate at all. Since this option allows the OCSP response to be signed by any certificate it should only be used for testing purposes. −no_chain Do not use certificates in the response as additional untrusted CA certificates. −no_explicit Do not explicitly trust the root CA if it is set to be trusted for OCSP signing. −no_cert_checks Don't perform any additional checks on the OCSP response signers certificate. That is do not make any checks to see if the signers certificate is authorised to provide the necessary status information: as a result this option should only be used for testing purposes. −validity_period nsec, −status_age age These options specify the range of times, in seconds, which will be tolerated in an OCSP response. Each certificate status response includes a notBefore time and an optional notAfter time. The current time should fall between these two values, but the interval between the two times may be only a few seconds. In practice the OCSP responder and clients clocks may not be precisely synchronised and so such a check may fail. To avoid this the ​−validity_period option can be used to specify an acceptable error range in seconds, the default value is 5 minutes. If the notAfter time is omitted from a response then this means that new status information is immediately available. In this case the age of the ​notBefore field is checked to see it is not older than age seconds old. By default this additional check is not performed. −rcid digest This option sets the digest algorithm to use for certificate identification in the OCSP response. Any digest supported by the openssl−dgst(1) command can be used. The default is the same digest algorithm used in the request. digest This option sets digest algorithm to use for certificate identification in the OCSP request. Any digest supported by the OpenSSL dgst command can be used. The default is SHA−1. This option may be used multiple times to specify the digest used by subsequent certificate identifiers. −CAfile file, −no−CAfile, −CApath dir, −no−CApath, −CAstore uri, −no−CAstore See "Trusted Certificate Options" in openssl−verification−options(1) for details. −allow_proxy_certs, −attime, −no_check_time, −check_ss_sig, −crl_check, −crl_check_all, −explicit_policy, −extended_crl, −ignore_critical, −inhibit_any, −inhibit_map, −no_alt_chains, −partial_chain, −policy, −policy_check, −policy_print, −purpose, −suiteB_128, −suiteB_128_only, −suiteB_192, −trusted_first, −use_deltas, −auth_level, −verify_depth, −verify_email, −verify_hostname, −verify_ip, −verify_name, −x509_strict −issuer_checks Set various options of certificate chain verification. See "Verification Options" in openssl−verification−options(1) for details. −provider name −provider−path path −propquery propq See "Provider Options" in openssl(1), provider(7), and property(7).

OCSP Server Options−index indexfile The indexfile parameter is the name of a text index file in ca format containing certificate revocation information. If the −index option is specified then this command switches to responder mode, otherwise it is in client mode. The request(s) the responder processes can be either specified on the command line (using −issuer and −serial options), supplied in a file (using the −reqin option) or via external OCSP clients (if −port or −url is specified). If the −index option is present then the −CA and −rsigner options must also be present. −CA file CA certificate corresponding to the revocation information in the index file given with −index. The input can be in PEM, DER, or PKCS#12 format. −rsigner file The certificate to sign OCSP responses with. −rkey file The private key to sign OCSP responses with: if not present the file specified in the −rsigner option is used. −passin arg The private key password source. For more information about the format of arg see openssl−passphrase−options(1). −rother file Additional certificates to include in the OCSP response. The input can be in PEM, DER, or PKCS#12 format. −rsigopt nm:v Pass options to the signature algorithm when signing OCSP responses. Names and values of these options are algorithm-specific. −rmd digest The digest to use when signing the response. −badsig Corrupt the response signature before writing it; this can be useful for testing. −resp_no_certs Don't include any certificates in the OCSP response. −resp_key_id Identify the signer certificate using the key ID, default is to use the subject name. −port portnum Port to listen for OCSP requests on. The port may also be specified using the url option. A 0 argument indicates that any available port shall be chosen automatically. −ignore_err Ignore malformed requests or responses: When acting as an OCSP client, retry if a malformed response is received. When acting as an OCSP responder, continue running instead of terminating upon receiving a malformed request. −nrequest number The OCSP server will exit after receiving number requests, default unlimited. −multi process-count Run the specified number of OCSP responder child processes, with the parent process respawning child processes as needed. Child processes will detect changes in the CA index file and automatically reload it. When running as a responder −timeout option is recommended to limit the time each child is willing to wait for the client's OCSP response. This option is available on POSIX systems (that support the fork() and other required unix system-calls). −nmin minutes, −ndays days Number of minutes or days when fresh revocation information is available: used in the nextUpdate field. If neither option is present then the ​nextUpdate field is omitted meaning fresh revocation information is immediately available.

OCSP RESPONSE VERIFICATIONOCSP Response follows the rules specified in RFC2560. Initially the OCSP responder certificate is located and the signature on the OCSP request checked using the responder certificate's public key. Then a normal certificate verify is performed on the OCSP responder certificate building up a certificate chain in the process. The locations of the trusted certificates used to build the chain can be specified by the −CAfile, ​−CApath or −CAstore options or they will be looked for in the standard OpenSSL certificates directory. If the initial verify fails then the OCSP verify process halts with an error. Otherwise the issuing CA certificate in the request is compared to the OCSP responder certificate: if there is a match then the OCSP verify succeeds. Otherwise the OCSP responder certificate's CA is checked against the issuing CA certificate in the request. If there is a match and the OCSPSigning extended key usage is present in the OCSP responder certificate then the OCSP verify succeeds. Otherwise, if −no_explicit is not set the root CA of the OCSP responders CA is checked to see if it is trusted for OCSP signing. If it is the OCSP verify succeeds. If none of these checks is successful then the OCSP verify fails. What this effectively means if that if the OCSP responder certificate is authorised directly by the CA it is issuing revocation information about (and it is correctly configured) then verification will succeed. If the OCSP responder is a "global responder" which can give details about multiple CAs and has its own separate certificate chain then its root CA can be trusted for OCSP signing. For example: ​ openssl x509 −in ocspCA.pem −addtrust OCSPSigning −out trustedCA.pem Alternatively the responder certificate itself can be explicitly trusted with the −VAfile option.

NOTESAs noted, most of the verify options are for testing or debugging purposes. Normally only the −CApath, −CAfile, −CAstore and (if the responder is a 'global VA') −VAfile options need to be used. The OCSP server is only useful for test and demonstration purposes: it is not really usable as a full OCSP responder. It contains only a very simple HTTP request handling and can only handle the POST form of OCSP queries. It also handles requests serially meaning it cannot respond to new requests until it has processed the current one. The text index file format of revocation is also inefficient for large quantities of revocation data. It is possible to run this command in responder mode via a CGI script using the −reqin and −respout options.

EXAMPLESCreate an OCSP request and write it to a file: ​ openssl ocsp −issuer issuer.pem −cert c1.pem −cert c2.pem −reqout req.der Send a query to an OCSP responder with URL http://ocsp.myhost.com/ save the response to a file, print it out in text form, and verify the response: ​ openssl ocsp −issuer issuer.pem −cert c1.pem −cert c2.pem \ ​ −url http://ocsp.myhost.com/ −resp_text −respout resp.der Read in an OCSP response and print out text form: ​ openssl ocsp −respin resp.der −text −noverify OCSP server on port 8888 using a standard ca configuration, and a separate responder certificate. All requests and responses are printed to a file. ​ openssl ocsp −index demoCA/index.txt −port 8888 −rsigner rcert.pem −CA demoCA/cacert.pem ​ −text −out log.txt As above but exit after processing one request: ​ openssl ocsp −index demoCA/index.txt −port 8888 −rsigner rcert.pem −CA demoCA/cacert.pem ​ −nrequest 1 Query status information using an internally generated request: ​ openssl ocsp −index demoCA/index.txt −rsigner rcert.pem −CA demoCA/cacert.pem ​ −issuer demoCA/cacert.pem −serial 1 Query status information using request read from a file, and write the response to a second file. ​ openssl ocsp −index demoCA/index.txt −rsigner rcert.pem −CA demoCA/cacert.pem ​ −reqin req.der −respout resp.der

HISTORYThe −no_alt_chains option was added in OpenSSL 1.1.0.

COPYRIGHTCopyright 2001−2021 The OpenSSL Project Authors. All Rights Reserved. Licensed under the Apache License 2.0 (the "License"). You may not use this file except in compliance with the License. You can obtain a copy in the file LICENSE in the source distribution or at <https://www.openssl.org/source/license.html>.
0
Johanes Gumabo
Data Size   :   76,520 byte
man-openssl-ocsp.1osslBuild   :   2024-12-05, 20:55   :  
Visitor Screen   :   x
Visitor Counter ( page / site )   :   3 / 180,717
Visitor ID   :     :  
Visitor IP   :   3.141.19.115   :  
Visitor Provider   :   AMAZON-02   :  
Provider Position ( lat x lon )   :   39.962500 x -83.006100   :   x
Provider Accuracy Radius ( km )   :   1000   :  
Provider City   :   Columbus   :  
Provider Province   :   Ohio ,   :   ,
Provider Country   :   United States   :  
Provider Continent   :   North America   :  
Visitor Recorder   :   Version   :  
Visitor Recorder   :   Library   :  
Online Linux Manual Page   :   Version   :   Online Linux Manual Page - Fedora.40 - march=x86-64 - mtune=generic - 24.12.05
Online Linux Manual Page   :   Library   :   lib_c - 24.10.03 - march=x86-64 - mtune=generic - Fedora.40
Online Linux Manual Page   :   Library   :   lib_m - 24.10.03 - march=x86-64 - mtune=generic - Fedora.40
Data Base   :   Version   :   Online Linux Manual Page Database - 24.04.13 - march=x86-64 - mtune=generic - fedora-38
Data Base   :   Library   :   lib_c - 23.02.07 - march=x86-64 - mtune=generic - fedora.36

Very long time ago, I have the best tutor, Wenzel Svojanovsky . If someone knows the email address of Wenzel Svojanovsky , please send an email to johanes_gumabo@yahoo.co.id .
If error, please print screen and send to johanes_gumabo@yahoo.co.id
Under development. Support me via PayPal.

ERROR : Need New Coding :         (parse_manual_page_|249|openssl-ocsp.1ossl|24/25|el══─{─══.|.el══─{─══. ds C` )         (htmlprn|149|openssl-ocsp.1ossl|24/25|.el══─{─══. ds C` |.el══─{─══. ds C` )         (parse_manual_page_|249|openssl-ocsp.1ossl|27|br══─}─══|'br══─}─══ )         (htmlprn|149|openssl-ocsp.1ossl|27|'br══─}─══ |'br══─}─══ )         (rof_escape_sequence|91|openssl-ocsp.1ossl|205|\*(C`0x\*(C'\fR. Negative integers can also |decimal integer unless preceded by \f(CW\*(C`0x\*(C'\fR. Negative integers can also )         (rof_escape_sequence|91|openssl-ocsp.1ossl|206|\*(C`\-\*(C'\fR sign. |be specified by preceding the value by a \f(CW\*(C`\-\*(C'\fR sign. )         (rof_escape_sequence|91|openssl-ocsp.1ossl|251|\*(C`https\*(C'\fR; apart from that |The proxy port defaults to 80 or 443 if the scheme is \f(CW\*(C`https\*(C'\fR; apart from that )         (rof_escape_sequence|91|openssl-ocsp.1ossl|252|\*(C`http://\*(C'\fR or \f(CW\*(C`https://\*(C'\fR prefix is ignored, |the optional \f(CW\*(C`http://\*(C'\fR or \f(CW\*(C`https://\*(C'\fR prefix is ignored, )         (rof_escape_sequence|91|openssl-ocsp.1ossl|254|\*(C`http_proxy\*(C'\fR if set, else \f(CW\*(C`HTTP_PROXY\*(C'\fR |Defaults to the environment variable \f(CW\*(C`http_proxy\*(C'\fR if set, else \f(CW\*(C`HTTP_PROXY\*(C'\fR )         (rof_escape_sequence|91|openssl-ocsp.1ossl|255|\*(C`https_proxy\*(C'\fR if set, else \f(CW\*(C`HTTPS_PROXY\*(C'\fR. |in case no TLS is used, otherwise \f(CW\*(C`https_proxy\*(C'\fR if set, else \f(CW\*(C`HTTPS_PROXY\*(C'\fR. )         (rof_escape_sequence|91|openssl-ocsp.1ossl|261|\*(C`no_proxy\*(C'\fR if set, else \f(CW\*(C`NO_PROXY\*(C'\fR. |Default is from the environment variable \f(CW\*(C`no_proxy\*(C'\fR if set, else \f(CW\*(C`NO_PROXY\*(C'\fR. )