™.. PERLREPOSITORY - Online Linux Manual PageSection : 1
Updated : 2009-08-03
Source : perl v5.10.1
Note : Perl Programmers Reference Guide

NAMEperlrepository − Using the Perl source repository

SYNOPSISAll of Perl's source code is kept centrally in a Git repository at ​perl5.git.perl.org. The repository contains many Perl revisions from Perl 1 onwards and all the revisions from Perforce, the version control system we were using previously. This repository is accessible in different ways. The full repository takes up about 80MB of disk space. A check out of the blead branch (that is, the main development branch, which contains bleadperl, the development version of perl 5) takes up about 160MB of disk space (including the repository). A build of bleadperl takes up about 200MB (including the repository and the check out).

GETTING ACCESS TO THE REPOSITORY

READ ACCESS VIA THE WEBYou may access the repository over the web. This allows you to browse the tree, see recent commits, subscribe to RSS feeds for the changes, search for particular commits and more. You may access it at: ​ http://perl5.git.perl.org/perl.git A mirror of the repository is found at: ​ http://github.com/github/perl

READ ACCESS VIA GITYou will need a copy of Git for your computer. You can fetch a copy of the repository using the Git protocol (which uses port 9418): ​ git clone git://perl5.git.perl.org/perl.git perl−git This clones the repository and makes a local copy in the perl-git directory. If your local network does not allow you to use port 9418, then you can fetch a copy of the repository over HTTP (this is slower): ​ git clone http://perl5.git.perl.org/perl.git perl−http This clones the repository and makes a local copy in the perl-http directory.

WRITE ACCESS TO THE REPOSITORYIf you are a committer, then you can fetch a copy of the repository that you can push back on with: ​ git clone ssh://perl5.git.perl.org/gitroot/perl.git perl−ssh This clones the repository and makes a local copy in the perl-ssh directory. If you cloned using the git protocol, which is faster than ssh, then you will need to modify your config in order to enable pushing. Edit ​.git/config where you will see something like: [remote "origin"] ​ url = git://perl5.git.perl.org/perl.git change that to something like this: [remote "origin"] ​ url = ssh://perl5.git.perl.org/gitroot/perl.git NOTE: there are symlinks set up so that the /gitroot is optional and since SSH is the default protocol you can actually shorten the url to ​\*(C`perl5.git.perl.org:/perl.git\*(C'\fR. You can also set up your user name and e−mail address. For example ​ % git config user.name "Leon Brocard" ​ % git config user.email acme@astray.com It is also possible to keep \*(C`origin\*(C'\fR as a git remote, and add a new remote for ssh access: ​ % git remote add camel perl5.git.perl.org:/perl.git This allows you to update your local repository by pulling from ​\*(C`origin\*(C'\fR, which is faster and doesn't require you to authenticate, and to push your changes back with the \*(C`camel\*(C'\fR remote: ​ % git fetch camel ​ % git push camel The \*(C`fetch\*(C'\fR command just updates the \f(CW\*(C`camel\*(C'\fR refs, as the objects themselves should have been fetched when pulling from \*(C`origin\*(C'\fR. The committers have access to 2 servers that serve perl5.git.perl.org. One is camel.booking.com, which is the 'master' repository. The perl5.git.perl.org IP address also lives on this machine. The second one is dromedary.booking.com, which can be used for general testing and development. Dromedary syncs the git tree from camel every few minutes, you should not push there. Both machines also have a full CPAN mirror. To share files with the general public, dromedary serves your ~/public_html/ as http://users.perl5.git.perl.org/~yourlogin/

OVERVIEW OF THE REPOSITORYOnce you have changed into the repository directory, you can inspect it. After a clone the repository will contain a single local branch, which will be the current branch as well, as indicated by the asterisk. ​ % git branch ​ * blead Using the −a switch to \*(C`branch\*(C'\fR will also show the remote tracking branches in the repository: ​ % git branch −a ​ * blead ​ origin/HEAD ​ origin/blead ​ ... The branches that begin with origin correspond to the git remote that you cloned from (which is named origin). Each branch on the remote will be exactly tracked by theses branches. You should NEVER do work on these remote tracking branches. You only ever do work in a local branch. Local branches can be configured to automerge (on pull) from a designated remote tracking branch. This is the case with the default branch \*(C`blead\*(C'\fR which will be configured to merge from the remote tracking branch \*(C`origin/blead\*(C'\fR. You can see recent commits: ​ % git log And pull new changes from the repository, and update your local repository (must be clean first) ​ % git pull Assuming we are on the branch \*(C`blead\*(C'\fR immediately after a pull, this command would be more or less equivalent to: ​ % git fetch ​ % git merge origin/blead In fact if you want to update your local repository without touching your working directory you do: ​ % git fetch And if you want to update your remote-tracking branches for all defined remotes simultaneously you can do ​ % git remote update Neither of these last two commands will update your working directory, however both will update the remote-tracking branches in your repository. To switch to another branch: ​ % git checkout origin/maint−5.8−dor To make a local branch of a remote branch: ​ % git checkout −b maint−5.10 origin/maint−5.10 To switch back to blead: ​ % git checkout blead

FINDING OUT YOUR STATUSThe most common git command you will use will probably be ​ % git status This command will produce as output a description of the current state of the repository, including modified files and unignored untracked files, and in addition it will show things like what files have been staged for the next commit, and usually some useful information about how to change things. For instance the following: ​ $ git status ​ # On branch blead ​ # Your branch is ahead of 'origin/blead' by 1 commit. ​ # ​ # Changes to be committed: ​ # (use "git reset HEAD <file>..." to unstage) ​ # ​ # modified: pod/perlrepository.pod ​ # ​ # Changed but not updated: ​ # (use "git add <file>..." to update what will be committed) ​ # ​ # modified: pod/perlrepository.pod ​ # ​ # Untracked files: ​ # (use "git add <file>..." to include in what will be committed) ​ # ​ # deliberate.untracked This shows that there were changes to this document staged for commit, and that there were further changes in the working directory not yet staged. It also shows that there was an untracked file in the working directory, and as you can see shows how to change all of this. It also shows that there is one commit on the working branch \*(C`blead\*(C'\fR which has not been pushed to the \*(C`origin\*(C'\fR remote yet. \fB\s-1NOTE\s0\fR: that this output is also what you see as a template if you do not provide a message to ​\*(C`git commit\*(C'\fR. Assuming we commit all the mentioned changes above: ​ % git commit −a −m'explain git status and stuff about remotes' ​ Created commit daf8e63: explain git status and stuff about remotes ​ 1 files changed, 83 insertions(+), 3 deletions() We can re-run git status and see something like this: ​ % git status ​ # On branch blead ​ # Your branch is ahead of 'origin/blead' by 2 commits. ​ # ​ # Untracked files: ​ # (use "git add <file>..." to include in what will be committed) ​ # ​ # deliberate.untracked ​ nothing added to commit but untracked files present (use "git add" to track) When in doubt, before you do anything else, check your status and read it carefully, many questions are answered directly by the git status output.

SUBMITTING A PATCHIf you have a patch in mind for Perl, you should first get a copy of the repository: ​ % git clone git://perl5.git.perl.org/perl.git perl−git Then change into the directory: ​ % cd perl−git Alternatively, if you already have a Perl repository, you should ensure that you're on the blead branch, and your repository is up to date: ​ % git checkout blead ​ % git pull It's preferable to patch against the latest blead version, since this is where new development occurs for all changes other than critical bug fixes. Critical bug fix patches should be made against the relevant maint branches, or should be submitted with a note indicating all the branches where the fix should be applied. Now that we have everything up to date, we need to create a temporary new branch for these changes and switch into it: ​ % git checkout −b orange which is the short form of ​ % git branch orange ​ % git checkout orange Then make your changes. For example, if Leon Brocard changes his name to Orange Brocard, we should change his name in the AUTHORS file: ​ % perl −pi −e 's{Leon Brocard}{Orange Brocard}' AUTHORS You can see what files are changed: ​ % git status ​ # On branch orange ​ # Changes to be committed: ​ # (use "git reset HEAD <file>..." to unstage) ​ # ​ # modified: AUTHORS ​ # And you can see the changes: ​ % git diff ​ diff −−git a/AUTHORS b/AUTHORS ​ index 293dd70..722c93e 100644 ​ −−− a/AUTHORS ​ +++ b/AUTHORS ​ @@ −541,7 +541,7 @@ Lars Hecking <lhecking@nmrc.ucc.ie> ​ Laszlo Molnar <laszlo.molnar@eth.ericsson.se> ​ Leif Huhn <leif@hale.dkstat.com> ​ Len Johnson <lenjay@ibm.net> ​ −Leon Brocard <acme@astray.com> ​ +Orange Brocard <acme@astray.com> ​ Les Peters <lpeters@aol.net> ​ Lesley Binks <lesley.binks@gmail.com> ​ Lincoln D. Stein <lstein@cshl.org> Now commit your change locally: ​ % git commit −a −m 'Rename Leon Brocard to Orange Brocard' ​ Created commit 6196c1d: Rename Leon Brocard to Orange Brocard ​ 1 files changed, 1 insertions(+), 1 deletions() You can examine your last commit with: ​ % git show HEAD and if you are not happy with either the description or the patch itself you can fix it up by editing the files once more and then issue: ​ % git commit −a −−amend Now you should create a patch file for all your local changes: ​ % git format−patch origin ​ 0001−Rename−Leon−Brocard−to−Orange−Brocard.patch You should now send an email to perl5−porters@perl.org with a description of your changes, and include this patch file as an attachment. If you want to delete your temporary branch, you may do so with: ​ % git checkout blead ​ % git branch −d orange ​ error: The branch 'orange' is not an ancestor of your current HEAD. ​ If you are sure you want to delete it, run 'git branch −D orange'. ​ % git branch −D orange ​ Deleted branch orange.

A note on derived filesBe aware that many files in the distribution are derivative\*(--avoid patching them, because git won't see the changes to them, and the build process will overwrite them. Patch the originals instead. Most utilities (like perldoc) are in this category, i.e. patch utils/perldoc.PL rather than utils/perldoc. Similarly, don't create patches for files under $src_root/ext from their copies found in ​$install_root/lib. If you are unsure about the proper location of a file that may have gotten copied while building the source distribution, consult the \*(C`MANIFEST\*(C'\fR.

A note on binary filesSince the patch(1) utility cannot deal with binary files, it's important that you either avoid the use of binary files in your patch, generate the files dynamically, or that you encode any binary files using the uupacktool.pl utility. Assuming you needed to include a gzip-encoded file for a module's test suite, you might do this as follows using the uupacktool.pl utility: ​ $ perl uupacktool.pl −v −p −D lib/Some/Module/t/src/t.gz ​ Writing lib/Some/Module/t/src/t.gz into lib/Some/Module/t/src/t.gz.packed This will replace the \*(C`t.gz\*(C'\fR file with an encoded counterpart. During ​\*(C`make test\*(C'\fR, before any tests are run, perl's Makefile will restore all the \*(C`.packed\*(C'\fR files mentioned in the \s-1MANIFEST\s0 to their original name. This means that the test suite does not need to be aware of this packing scheme and will not need to be altered.

Getting your patch acceptedThe first thing you should include with your patch is a description of the problem that the patch corrects. If it is a code patch (rather than a documentation patch) you should also include a small test case that illustrates the bug (a patch to an existing test file is preferred). If you are submitting a code patch there are several other things that you need to do. Comments, Comments, Comments Be sure to adequately comment your code. While commenting every line is unnecessary, anything that takes advantage of side effects of operators, that creates changes that will be felt outside of the function being patched, or that others may find confusing should be documented. If you are going to err, it is better to err on the side of adding too many comments than too few. Style In general, please follow the particular style of the code you are patching. In particular, follow these general guidelines for patching Perl sources: ​ 8−wide tabs (no exceptions!) ​ 4−wide indents for code, 2−wide indents for nested CPP #defines ​ try hard not to exceed 79−columns ​ ANSI C prototypes ​ uncuddled elses and "K&R" style for indenting control constructs ​ no C++ style (//) comments ​ mark places that need to be revisited with XXX (and revisit often!) ​ opening brace lines up with "if" when conditional spans multiple ​ lines; should be at end−of−line otherwise ​ in function definitions, name starts in column 0 (return value is on ​ previous line) ​ single space after keywords that are followed by parens, no space ​ between function name and following paren ​ avoid assignments in conditionals, but if they're unavoidable, use ​ extra paren, e.g. "if (a && (b = c)) ...""return foo;" rather than "return(foo);""if (!foo) ..." rather than "if (foo == FALSE) ..." etc. Testsuite When submitting a patch you should make every effort to also include an addition to perl's regression tests to properly exercise your patch. Your testsuite additions should generally follow these guidelines (courtesy of Gurusamy Sarathy <gsar@activestate.com>): ​ Know what you're testing. Read the docs, and the source. ​ Tend to fail, not succeed. ​ Interpret results strictly. ​ Use unrelated features (this will flush out bizarre interactions). ​ Use non−standard idioms (otherwise you are not testing TIMTOWTDI). ​ Avoid using hardcoded test numbers whenever possible (the ​ EXPECTED/GOT found in t/op/tie.t is much more maintainable, ​ and gives better failure reports). ​ Give meaningful error messages when a test fails. ​ Avoid using qx// and system() unless you are testing for them. If you ​ do use them, make sure that you cover _all_ perl platforms. ​ Unlink any temporary files you create. ​ Promote unforeseen warnings to errors with $SIG{_ _WARN_ _}. ​ Be sure to use the libraries and modules shipped with the version ​ being tested, not those that were already installed. ​ Add comments to the code explaining what you are testing for. ​ Make updating the '1..42' string unnecessary. Or make sure that ​ you update it. ​ Test _all_ behaviors of a given operator, library, or function: ​ − All optional arguments ​ − Return values in various contexts (boolean, scalar, list, lvalue) ​ − Use both global and lexical variables ​ − Don't forget the exceptional, pathological cases.

ACCEPTING A PATCHIf you have received a patch file generated using the above section, you should try out the patch. First we need to create a temporary new branch for these changes and switch into it: ​ % git checkout −b experimental Patches that were formatted by \*(C`git format\-patch\*(C'\fR are applied with ​\*(C`git am\*(C'\fR: ​ % git am 0001−Rename−Leon−Brocard−to−Orange−Brocard.patch ​ Applying Rename Leon Brocard to Orange Brocard If just a raw diff is provided, it is also possible use this two-step process: ​ % git apply bugfix.diff ​ % git commit −a −m "Some fixing" −−author="That Guy <that.guy@internets.com>" Now we can inspect the change: ​ % git show HEAD ​ commit b1b3dab48344cff6de4087efca3dbd63548ab5e2 ​ Author: Leon Brocard <acme@astray.com> ​ Date: Fri Dec 19 17:02:59 2008 +0000 ​ ​ Rename Leon Brocard to Orange Brocard ​ ​ diff −−git a/AUTHORS b/AUTHORS ​ index 293dd70..722c93e 100644 ​ −−− a/AUTHORS ​ +++ b/AUTHORS ​ @@ −541,7 +541,7 @@ Lars Hecking <lhecking@nmrc.ucc.ie> ​ Laszlo Molnar <laszlo.molnar@eth.ericsson.se> ​ Leif Huhn <leif@hale.dkstat.com> ​ Len Johnson <lenjay@ibm.net> ​ −Leon Brocard <acme@astray.com> ​ +Orange Brocard <acme@astray.com> ​ Les Peters <lpeters@aol.net> ​ Lesley Binks <lesley.binks@gmail.com> ​ Lincoln D. Stein <lstein@cshl.org> If you are a committer to Perl and you think the patch is good, you can then merge it into blead then push it out to the main repository: ​ % git checkout blead ​ % git merge experimental ​ % git push If you want to delete your temporary branch, you may do so with: ​ % git checkout blead ​ % git branch −d experimental ​ error: The branch 'experimental' is not an ancestor of your current HEAD. ​ If you are sure you want to delete it, run 'git branch −D experimental'. ​ % git branch −D experimental ​ Deleted branch experimental.

CLEANING A WORKING DIRECTORYThe command \*(C`git clean\*(C'\fR can with varying arguments be used as a replacement for \*(C`make clean\*(C'\fR. To reset your working directory to a pristine condition you can do: ​ git clean −dxf However, be aware this will delete ALL untracked content. You can use ​ git clean −Xf to remove all ignored untracked files, such as build and test byproduct, but leave any manually created files alone. If you only want to cancel some uncommitted edits, you can use \*(C`git checkout\*(C'\fR and give it a list of files to be reverted, or \f(CW\*(C`git checkout ​−f\*(C'\fR to revert them all. If you want to cancel one or several commits, you can use \*(C`git reset\*(C'\fR.

BISECTING\*(C`git\*(C'\fR provides a built-in way to determine, with a binary search in the history, which commit should be blamed for introducing a given bug. Suppose that we have a script ~/testcase.pl that exits with 0 when some behaviour is correct, and with 1 when it's faulty. We need an helper script that automates building \*(C`perl\*(C'\fR and running the testcase: ​ % cat ~/run ​ #!/bin/sh ​ git clean −dxf ​ # If you can use ccache, add −Dcc=ccache\ gcc −Dld=gcc to the Configure line ​ sh Configure −des −Dusedevel −Doptimize="−g" ​ test −f config.sh || exit 125 ​ # Correct makefile for newer GNU gcc ​ perl −ni −we 'print unless /<(?:built−in|command)/' makefile x2p/makefile ​ # if you just need miniperl, replace test_prep with miniperl ​ make −j4 test_prep ​ −x ./perl || exit 125 ​ ./perl −Ilib ~/testcase.pl ​ ret=$? ​ git clean −dxf ​ exit $ret This script may return 125 to indicate that the corresponding commit should be skipped. Otherwise, it returns the status of ​~/testcase.pl. We first enter in bisect mode with: ​ % git bisect start For example, if the bug is present on \*(C`HEAD\*(C'\fR but wasn't in 5.10.0, ​\*(C`git\*(C'\fR will learn about this when you enter: ​ % git bisect bad ​ % git bisect good perl−5.10.0 ​ Bisecting: 853 revisions left to test after this This results in checking out the median commit between \*(C`HEAD\*(C'\fR and ​\*(C`perl\-5.10.0\*(C'\fR. We can then run the bisecting process with: ​ % git bisect run ~/run When the first bad commit is isolated, \*(C`git bisect\*(C'\fR will tell you so: ​ ca4cfd28534303b82a216cfe83a1c80cbc3b9dc5 is first bad commit ​ commit ca4cfd28534303b82a216cfe83a1c80cbc3b9dc5 ​ Author: Dave Mitchell <davem@fdisolutions.com> ​ Date: Sat Feb 9 14:56:23 2008 +0000 ​ ​ [perl #49472] Attributes + Unknown Error ​ ... ​ ​ bisect run success You can peek into the bisecting process with \*(C`git bisect log\*(C'\fR and ​\*(C`git bisect visualize\*(C'\fR. \f(CW\*(C`git bisect reset\*(C'\fR will get you out of bisect mode. Please note that the first \*(C`good\*(C'\fR state must be an ancestor of the first \*(C`bad\*(C'\fR state. If you want to search for the commit that \fIsolved\fR some bug, you have to negate your test case (i.e. exit with 1 if OK and 0 if not) and still mark the lower bound as \*(C`good\*(C'\fR and the upper as \*(C`bad\*(C'\fR. The \*(L"first bad commit\*(R" has then to be understood as the first commit where the bug is solved. \*(C`git help bisect\*(C'\fR has much more information on how you can tweak your binary searches.

SUBMITTING A PATCH VIA GITHUBGitHub is a website that makes it easy to fork and publish projects with Git. First you should set up a GitHub account and log in. Perl's git repository is mirrored on GitHub at this page: ​ http://github.com/github/perl/tree/blead Visit the page and click the fork button. This clones the Perl git repository for you and provides you with Your Clone URL from which you should clone: ​ % git clone git@github.com:USERNAME/perl.git perl−github We shall make the same patch as above, creating a new branch: ​ % cd perl−github ​ % git remote add upstream git://github.com/github/perl.git ​ % git pull upstream blead ​ % git checkout −b orange ​ % perl −pi −e 's{Leon Brocard}{Orange Brocard}' AUTHORS ​ % git commit −a −m 'Rename Leon Brocard to Orange Brocard' ​ % git push origin orange The orange branch has been pushed to GitHub, so you should now send an email to perl5−porters@perl.org with a description of your changes and the following information: ​ http://github.com/USERNAME/perl/tree/orange ​ git@github.com:USERNAME/perl.git branch orange

MERGING FROM A BRANCH VIA GITHUBIf someone has provided a branch via GitHub and you are a committer, you should use the following in your perl-ssh directory: ​ % git remote add dandv git://github.com/dandv/perl.git ​ % git fetch Now you can see the differences between the branch and blead: ​ % git diff dandv/blead And you can see the commits: ​ % git log dandv/blead If you approve of a specific commit, you can cherry pick it: ​ % git cherry−pick 3adac458cb1c1d41af47fc66e67b49c8dec2323f Or you could just merge the whole branch if you like it all: ​ % git merge dandv/blead And then push back to the repository: ​ % git push

COMMITTING TO MAINTENANCE VERSIONSMaintenance versions should only be altered to add critical bug fixes. To commit to a maintenance version of perl, you need to create a local tracking branch: ​ % git checkout −−track −b maint−5.005 origin/maint−5.005 This creates a local branch named \*(C`maint\-5.005\*(C'\fR, which tracks the remote branch \*(C`origin/maint\-5.005\*(C'\fR. Then you can pull, commit, merge and push as before. You can also cherry-pick commits from blead and another branch, by using the \*(C`git cherry\-pick\*(C'\fR command. It is recommended to use the ​−x option to \*(C`git cherry\-pick\*(C'\fR in order to record the \s-1SHA1\s0 of the original commit in the new commit message.

SEE ALSOThe git documentation, accessible via \*(C`git help command\*(C'\fR.
0
Johanes Gumabo
Data Size   :   71,789 byte
man-perlrepository.1Build   :   2024-12-05, 20:55   :  
Visitor Screen   :   x
Visitor Counter ( page / site )   :   3 / 182,179
Visitor ID   :     :  
Visitor IP   :   18.188.211.58   :  
Visitor Provider   :   AMAZON-02   :  
Provider Position ( lat x lon )   :   39.962500 x -83.006100   :   x
Provider Accuracy Radius ( km )   :   1000   :  
Provider City   :   Columbus   :  
Provider Province   :   Ohio ,   :   ,
Provider Country   :   United States   :  
Provider Continent   :   North America   :  
Visitor Recorder   :   Version   :  
Visitor Recorder   :   Library   :  
Online Linux Manual Page   :   Version   :   Online Linux Manual Page - Fedora.40 - march=x86-64 - mtune=generic - 24.12.05
Online Linux Manual Page   :   Library   :   lib_c - 24.10.03 - march=x86-64 - mtune=generic - Fedora.40
Online Linux Manual Page   :   Library   :   lib_m - 24.10.03 - march=x86-64 - mtune=generic - Fedora.40
Data Base   :   Version   :   Online Linux Manual Page Database - 24.04.13 - march=x86-64 - mtune=generic - fedora-38
Data Base   :   Library   :   lib_c - 23.02.07 - march=x86-64 - mtune=generic - fedora.36

Very long time ago, I have the best tutor, Wenzel Svojanovsky . If someone knows the email address of Wenzel Svojanovsky , please send an email to johanes_gumabo@yahoo.co.id .
If error, please print screen and send to johanes_gumabo@yahoo.co.id
Under development. Support me via PayPal.

ERROR : Need New Coding :         (parse_manual_page_|249|perlrepository.1|36/37|el══─{─══.|.el══─{─══. ds -- \|\(em\| )         (htmlprn|149|perlrepository.1|36/37|.el══─{─══. ds --  —  |.el══─{─══. ds -- \|\(em\| )         (parse_manual_page_|249|perlrepository.1|41|br══─}─══|'br══─}─══ )         (htmlprn|149|perlrepository.1|41|'br══─}─══ |'br══─}─══ )         (rof_nr_x|149|perlrepository.1|51/52|\nF|.ie \nF ══─{─══. de IX )         (rof_unit_scale_px|41|perlrepository.1|51/52|F|.ie \nF ══─{─══. de IX )         (rof_if|19|perlrepository.1|51/52|\nF|.ie \nF ══─{─══. de IX )         (htmlprn|149|perlrepository.1|51/52|.ie \nF ══─{─══. de IX|.ie \nF ══─{─══. de IX )         (rof_escape_sequence|91|perlrepository.1|53|\$1\t\\n%\t"\\$2" |. tm Index:\\$1\t\\n%\t"\\$2" )         (parse_manual_page_|249|perlrepository.1|57|══─}─══|.══─}─══ )         (htmlprn|149|perlrepository.1|57|.══─}─══ |.══─}─══ )         (rof_escape_sequence|91|perlrepository.1|215|\*(C`perl5.git.perl.org:/perl.git\*(C'\fR. |\&\f(CW\*(C`perl5.git.perl.org:/perl.git\*(C'\fR. )         (rof_escape_sequence|91|perlrepository.1|224|\*(C`origin\*(C'\fR as a git remote, and add a new |It is also possible to keep \f(CW\*(C`origin\*(C'\fR as a git remote, and add a new )         (rof_escape_sequence|91|perlrepository.1|232|\*(C`origin\*(C'\fR, which is faster and doesn't require you to authenticate, and |\&\f(CW\*(C`origin\*(C'\fR, which is faster and doesn't require you to authenticate, and )         (rof_escape_sequence|91|perlrepository.1|233|\*(C`camel\*(C'\fR remote: |to push your changes back with the \f(CW\*(C`camel\*(C'\fR remote: )         (rof_escape_sequence|91|perlrepository.1|240|\*(C`fetch\*(C'\fR command just updates the \f(CW\*(C`camel\*(C'\fR refs, as the objects |The \f(CW\*(C`fetch\*(C'\fR command just updates the \f(CW\*(C`camel\*(C'\fR refs, as the objects )         (rof_escape_sequence|91|perlrepository.1|241|\*(C`origin\*(C'\fR. |themselves should have been fetched when pulling from \f(CW\*(C`origin\*(C'\fR. )         (rof_escape_sequence|91|perlrepository.1|264|\*(C`branch\*(C'\fR will also show the remote tracking |Using the \-a switch to \f(CW\*(C`branch\*(C'\fR will also show the remote tracking )         (rof_escape_sequence|91|perlrepository.1|281|\*(C`blead\*(C'\fR which will be configured to merge from the |default branch \f(CW\*(C`blead\*(C'\fR which will be configured to merge from the )         (rof_escape_sequence|91|perlrepository.1|282|\*(C`origin/blead\*(C'\fR. |remote tracking branch \f(CW\*(C`origin/blead\*(C'\fR. )         (rof_escape_sequence|91|perlrepository.1|297|\*(C`blead\*(C'\fR immediately after a pull, this |Assuming we are on the branch \f(CW\*(C`blead\*(C'\fR immediately after a pull, this )         (rof_escape_sequence|91|perlrepository.1|379|\*(C`blead\*(C'\fR which has |shows that there is one commit on the working branch \f(CW\*(C`blead\*(C'\fR which has )         (rof_escape_sequence|91|perlrepository.1|380|\*(C`origin\*(C'\fR remote yet. \fB\s-1NOTE\s0\fR: that this output |not been pushed to the \f(CW\*(C`origin\*(C'\fR remote yet. \fB\s-1NOTE\s0\fR: that this output )         (rof_escape_sequence|91|perlrepository.1|382|\*(C`git commit\*(C'\fR. |\&\f(CW\*(C`git commit\*(C'\fR. )         (rof_escape_sequence|91|perlrepository.1|534|\*(--avoid |Be aware that many files in the distribution are derivative\*(--avoid )         (rof_escape_sequence|91|perlrepository.1|542|\*(C`MANIFEST\*(C'\fR. |distribution, consult the \f(CW\*(C`MANIFEST\*(C'\fR. )         (rof_escape_sequence|91|perlrepository.1|558|\*(C`t.gz\*(C'\fR file with an encoded counterpart. During |This will replace the \f(CW\*(C`t.gz\*(C'\fR file with an encoded counterpart. During )         (rof_escape_sequence|91|perlrepository.1|559|\*(C`make test\*(C'\fR, before any tests are run, perl's Makefile will restore |\&\f(CW\*(C`make test\*(C'\fR, before any tests are run, perl's Makefile will restore )         (rof_escape_sequence|91|perlrepository.1|560|\*(C`.packed\*(C'\fR files mentioned in the \s-1MANIFEST\s0 to their original |all the \f(CW\*(C`.packed\*(C'\fR files mentioned in the \s-1MANIFEST\s0 to their original )         (rof_escape_sequence|91|perlrepository.1|652|\*(C`git format\-patch\*(C'\fR are applied with |Patches that were formatted by \f(CW\*(C`git format\-patch\*(C'\fR are applied with )         (rof_escape_sequence|91|perlrepository.1|653|\*(C`git am\*(C'\fR: |\&\f(CW\*(C`git am\*(C'\fR: )         (rof_escape_sequence|91|perlrepository.1|714|\*(C`git clean\*(C'\fR can with varying arguments be used as a |The command \f(CW\*(C`git clean\*(C'\fR can with varying arguments be used as a )         (rof_escape_sequence|91|perlrepository.1|715|\*(C`make clean\*(C'\fR. |replacement for \f(CW\*(C`make clean\*(C'\fR. )         (rof_escape_sequence|91|perlrepository.1|732|\*(C`git |If you only want to cancel some uncommitted edits, you can use \f(CW\*(C`git )         (rof_escape_sequence|91|perlrepository.1|733|\*(C'\fR and give it a list of files to be reverted, or \f(CW\*(C`git checkout |checkout\*(C'\fR and give it a list of files to be reverted, or \f(CW\*(C`git checkout )         (rof_escape_sequence|91|perlrepository.1|734|\*(C'\fR to revert them all. |\&\-f\*(C'\fR to revert them all. )         (rof_escape_sequence|91|perlrepository.1|736|\*(C`git reset\*(C'\fR. |If you want to cancel one or several commits, you can use \f(CW\*(C`git reset\*(C'\fR. )         (rof_escape_sequence|91|perlrepository.1|739|\*(C`git\*(C'\fR provides a built-in way to determine, with a binary search in |\&\f(CW\*(C`git\*(C'\fR provides a built-in way to determine, with a binary search in )         (rof_escape_sequence|91|perlrepository.1|744|\*(C`perl\*(C'\fR and running the |an helper script that automates building \f(CW\*(C`perl\*(C'\fR and running the )         (rof_escape_sequence|91|perlrepository.1|775|\*(C`HEAD\*(C'\fR but wasn't in 5.10.0, |For example, if the bug is present on \f(CW\*(C`HEAD\*(C'\fR but wasn't in 5.10.0, )         (rof_escape_sequence|91|perlrepository.1|776|\*(C`git\*(C'\fR will learn about this when you enter: |\&\f(CW\*(C`git\*(C'\fR will learn about this when you enter: )         (rof_escape_sequence|91|perlrepository.1|784|\*(C`HEAD\*(C'\fR and |This results in checking out the median commit between \f(CW\*(C`HEAD\*(C'\fR and )         (rof_escape_sequence|91|perlrepository.1|785|\*(C`perl\-5.10.0\*(C'\fR. We can then run the bisecting process with: |\&\f(CW\*(C`perl\-5.10.0\*(C'\fR. We can then run the bisecting process with: )         (rof_escape_sequence|91|perlrepository.1|791|\*(C`git bisect\*(C'\fR will tell you so: |When the first bad commit is isolated, \f(CW\*(C`git bisect\*(C'\fR will tell you so: )         (rof_escape_sequence|91|perlrepository.1|805|\*(C`git bisect log\*(C'\fR and |You can peek into the bisecting process with \f(CW\*(C`git bisect log\*(C'\fR and )         (rof_escape_sequence|91|perlrepository.1|806|\*(C`git bisect visualize\*(C'\fR. \f(CW\*(C`git bisect reset\*(C'\fR will get you out of bisect |\&\f(CW\*(C`git bisect visualize\*(C'\fR. \f(CW\*(C`git bisect reset\*(C'\fR will get you out of bisect )         (rof_escape_sequence|91|perlrepository.1|809|\*(C`good\*(C'\fR state must be an ancestor of the |Please note that the first \f(CW\*(C`good\*(C'\fR state must be an ancestor of the )         (rof_escape_sequence|91|perlrepository.1|810|\*(C`bad\*(C'\fR state. If you want to search for the commit that \fIsolved\fR |first \f(CW\*(C`bad\*(C'\fR state. If you want to search for the commit that \fIsolved\fR )         (rof_escape_sequence|91|perlrepository.1|812|\*(C`good\*(C'\fR and the |and \f(CW0\fR if not) and still mark the lower bound as \f(CW\*(C`good\*(C'\fR and the )         (rof_escape_sequence|91|perlrepository.1|813|\*(C`bad\*(C'\fR. The \*(L"first bad commit\*(R" has then to be understood as |upper as \f(CW\*(C`bad\*(C'\fR. The \*(L"first bad commit\*(R" has then to be understood as )         (rof_escape_sequence|91|perlrepository.1|816|\*(C`git help bisect\*(C'\fR has much more information on how you can tweak your |\&\f(CW\*(C`git help bisect\*(C'\fR has much more information on how you can tweak your )         (rof_escape_sequence|91|perlrepository.1|907|\*(C`maint\-5.005\*(C'\fR, which tracks the |This creates a local branch named \f(CW\*(C`maint\-5.005\*(C'\fR, which tracks the )         (rof_escape_sequence|91|perlrepository.1|908|\*(C`origin/maint\-5.005\*(C'\fR. Then you can pull, commit, merge |remote branch \f(CW\*(C`origin/maint\-5.005\*(C'\fR. Then you can pull, commit, merge )         (rof_escape_sequence|91|perlrepository.1|912|\*(C`git cherry\-pick\*(C'\fR command. It is recommended to use the |using the \f(CW\*(C`git cherry\-pick\*(C'\fR command. It is recommended to use the )         (rof_escape_sequence|91|perlrepository.1|913|\*(C`git cherry\-pick\*(C'\fR in order to record the \s-1SHA1\s0 of the |\&\fB\-x\fR option to \f(CW\*(C`git cherry\-pick\*(C'\fR in order to record the \s-1SHA1\s0 of the )         (rof_escape_sequence|91|perlrepository.1|917|\*(C`git help command\*(C'\fR. |The git documentation, accessible via \f(CW\*(C`git help command\*(C'\fR. )