PMDASHPING - Online Linux Manual PageSection : 1
Updated : PCP
Source : Performance Co-Pilot
NAMEpmdashping − "shell-ping" performance metrics domain agent
SYNOPSIS$PCP_PMDAS_DIR/shping/pmdashping [−C] [−d domain] [−l logfile] [−I interval] [−t timeout] [−U username] configfile
DESCRIPTIONpmdashping is a Performance Metrics Domain Agent (PMDA) which exports quality of service and response time measurements for arbitrary commands as might be run from a shell such as sh(1). These measurements are intended to be used to quantify service quality and service availability for those services that are either mission critical or act as early indicators of adverse system performance. The sample configuration monitors simple shell commands ( exit and date(1)), a short computationally intensive task using sum(1), a short C compilation, DNS lookup via nslookup(1), YP lookup via ypcat(1), bind/portmapper service using rpcbind(1), SMTP by connecting to telnet port 25 and sending an ``expn root'' request, and NNTP by connecting to telnet port 119 and running a ``listgroup'' command. It is expected that other commands would follow the examples in the sample configuration file, and most deployments of the pmdashping PMDA are expected to use a customized configuration file. A brief description of the pmdashping command line options follows: −C  Parse configfile, reporting any errors and exiting with non-zero status if the file contains syntactical errors. −d  It is absolutely crucial that the performance metrics domain number specified here is unique and consistent. That is, domain should be different for every PMDA on the one host, and the same domain number should be used for the same PMDA on all hosts. −l  Location of the log file. By default, a log file named shping.log is written in the current directory of pmcd(1) when pmdashping is started, i.e. $PCP_LOG_DIR/pmcd. If the log file cannot be created or is not writable, output is written to the standard error instead. −I  Amount of time (in seconds) between subsequent executions of the list of commands provided via the configuration file configfile. The default is 2 minutes. −t  Amount of time (in seconds) to wait before timing out awaiting a response for a command from configfile. The default is 20 seconds. −U  User account under which to run the agent and all commands. The default is the unprivileged "pcp" account in current versions of PCP, but in older versions the superuser account ("root") was used by default. The required configfile specifies ``tag'' and ``command'' pairs, each on a separate line. All of the commands are run one after another, with the whole group rescheduled to be run once per interval. For each command that is run, pmdashping records information related to the success (or timeout), exit status, elapsed time and CPU time (system and user), and this information is exported by the PMDA. The tags are used to identify the individual commands amongst the values exported by the PMDA, and form the external instance domain identifiers for the pmdashping metrics which relate to each command.
INSTALLATIONIn order for a host to export the names, help text and values for the shping performance metrics, do the following as root: # cd $PCP_PMDAS_DIR/shping # ./Install The set of ``tag'' and ``command'' pairs may be specified from a default (sample) configuration file, a customized file or entered interactively as part of the Install script. If you want to undo the installation, do the following as root: # cd $PCP_PMDAS_DIR/shping # ./Remove pmdashping is launched by pmcd(1) and should never be executed directly. The Install and Remove scripts notify pmcd(1) when the agent is installed or removed.
FILES$PCP_PMCDCONF_PATH  command line options used to launch pmdashping $PCP_PMDAS_DIR/shping/help  default help text file for the shping metrics $PCP_PMDAS_DIR/shping/sample.conf  example configuration file with a number of common commands $PCP_PMDAS_DIR/shping/Install  installation script for the pmdashping agent $PCP_PMDAS_DIR/shping/Remove  undo installation script for pmdashping $PCP_LOG_DIR/pmcd/shping.log  default log file for error messages and other information from pmdashping
PCP ENVIRONMENTEnvironment variables with the prefix PCP_ are used to parameterize the file and directory names used by PCP. On each installation, the file /etc/pcp.conf contains the local values for these variables. The $PCP_CONF variable may be used to specify an alternative configuration file, as described in pcp.conf(5).
SEE ALSOPCPIntro(1), pmcd(1) and pcp-shping(1). 0
Johanes Gumabo
Data Size   :   15,339 byte
man-pmdashping.1Build   :   2024-12-05, 20:55   :  
Visitor Screen   :   x
Visitor Counter ( page / site )   :   2 / 183,897
Visitor ID   :     :  
Visitor IP   :   3.12.163.23   :  
Visitor Provider   :   AMAZON-02   :  
Provider Position ( lat x lon )   :   39.962500 x -83.006100   :   x
Provider Accuracy Radius ( km )   :   1000   :  
Provider City   :   Columbus   :  
Provider Province   :   Ohio ,   :   ,
Provider Country   :   United States   :  
Provider Continent   :   North America   :  
Visitor Recorder   :   Version   :  
Visitor Recorder   :   Library   :  
Online Linux Manual Page   :   Version   :   Online Linux Manual Page - Fedora.40 - march=x86-64 - mtune=generic - 24.12.05
Online Linux Manual Page   :   Library   :   lib_c - 24.10.03 - march=x86-64 - mtune=generic - Fedora.40
Online Linux Manual Page   :   Library   :   lib_m - 24.10.03 - march=x86-64 - mtune=generic - Fedora.40
Data Base   :   Version   :   Online Linux Manual Page Database - 24.04.13 - march=x86-64 - mtune=generic - fedora-38
Data Base   :   Library   :   lib_c - 23.02.07 - march=x86-64 - mtune=generic - fedora.36
Very long time ago, I have the best tutor, Wenzel Svojanovsky . If someone knows the email address of Wenzel Svojanovsky , please send an email to johanes_gumabo@yahoo.co.id .
If error, please print screen and send to johanes_gumabo@yahoo.co.id
Under development. Support me via PayPal.