pow.3p - Online Linux Manual Page

POW - Online Linux Manual PageSection : 3P
Updated : 2017
Source : IEEE/The Open Group
Note : POSIX Programmer's Manual

PROLOGThis manual page is part of the POSIX Programmer's Manual. The Linux implementation of this interface may differ (consult the corresponding Linux manual page for details of Linux behavior), or the interface may not be implemented on Linux.

NAMEpow, powf, powl — power function

SYNOPSIS#include <math.h> double pow(double x, double y); float powf(float x, float y); long double powl(long double x, long double y);

DESCRIPTIONThe functionality described on this reference page is aligned with the ISO C standard. Any conflict between the requirements described here and the ISO C standard is unintentional. This volume of POSIX.1‐2017 defers to the ISO C standard. These functions shall compute the value of x raised to the power y, xy. If x is negative, the application shall ensure that y is an integer value. An application wishing to check for error situations should set errno to zero and call feclearexcept(FE_ALL_EXCEPT) before calling these functions. On return, if errno is non-zero or fetestexcept(FE_INVALID | FE_DIVBYZERO | FE_OVERFLOW | FE_UNDERFLOW) is non-zero, an error has occurred.

RETURN VALUEUpon successful completion, these functions shall return the value of x raised to the power y. For finite values of x < 0, and finite non-integer values of y, a domain error shall occur and either a NaN (if representable), or an implementation-defined value shall be returned. If the correct value would cause overflow, a range error shall occur and pow(), powf(), and powl() shall return ±HUGE_VAL, ±HUGE_VALF, and ±HUGE_VALL, respectively, with the same sign as the correct value of the function. If the correct value would cause underflow, and is not representable, a range error may occur, and pow(), powf(), and powl() shall return 0.0, or (if IEC 60559 Floating-Point is not supported) an implementation-defined value no greater in magnitude than DBL_MIN, FLT_MIN, and LDBL_MIN, respectively. For y < 0, if x is zero, a pole error may occur and pow(), powf(), and powl() shall return ±HUGE_VAL, ±HUGE_VALF, and ±HUGE_VALL, respectively. On systems that support the IEC 60559 Floating-Point option, if x is ±0, a pole error shall occur and pow(), powf(), and powl() shall return ±HUGE_VAL, ±HUGE_VALF, and ±HUGE_VALL, respectively if y is an odd integer, or HUGE_VAL, HUGE_VALF, and HUGE_VALL, respectively if y is not an odd integer. If x or y is a NaN, a NaN shall be returned (unless specified elsewhere in this description). For any value of y (including NaN), if x is +1, 1.0 shall be returned. For any value of x (including NaN), if y is ±0, 1.0 shall be returned. For any odd integer value of y > 0, if x is ±0, ±0 shall be returned. For y > 0 and not an odd integer, if x is ±0, +0 shall be returned. If x is −1, and y is ±Inf, 1.0 shall be returned. For |x| < 1, if y is −Inf, +Inf shall be returned. For |x| > 1, if y is −Inf, +0 shall be returned. For |x| < 1, if y is +Inf, +0 shall be returned. For |x| > 1, if y is +Inf, +Inf shall be returned. For y an odd integer < 0, if x is −Inf, −0 shall be returned. For y < 0 and not an odd integer, if x is −Inf, +0 shall be returned. For y an odd integer > 0, if x is −Inf, −Inf shall be returned. For y > 0 and not an odd integer, if x is −Inf, +Inf shall be returned. For y < 0, if x is +Inf, +0 shall be returned. For y > 0, if x is +Inf, +Inf shall be returned. If the correct value would cause underflow, and is representable, a range error may occur and the correct value shall be returned.

ERRORSThese functions shall fail if: Domain Error The value of x is negative and y is a finite non-integer. If the integer expression (math_errhandling & MATH_ERRNO) is non-zero, then errno shall be set to [EDOM]. If the integer expression (math_errhandling & MATH_ERREXCEPT) is non-zero, then the invalid floating-point exception shall be raised. Pole Error The value of x is zero and y is negative. If the integer expression (math_errhandling & MATH_ERRNO) is non-zero, then errno shall be set to [ERANGE]. If the integer expression (math_errhandling & MATH_ERREXCEPT) is non-zero, then the divide-by-zero floating-point exception shall be raised. Range Error The result overflows. If the integer expression (math_errhandling & MATH_ERRNO) is non-zero, then errno shall be set to [ERANGE]. If the integer expression (math_errhandling & MATH_ERREXCEPT) is non-zero, then the overflow floating-point exception shall be raised. These functions may fail if: Pole Error The value of x is zero and y is negative. If the integer expression (math_errhandling & MATH_ERRNO) is non-zero, then errno shall be set to [ERANGE]. If the integer expression (math_errhandling & MATH_ERREXCEPT) is non-zero, then the divide-by-zero floating-point exception shall be raised. Range Error The result underflows. If the integer expression (math_errhandling & MATH_ERRNO) is non-zero, then errno shall be set to [ERANGE]. If the integer expression (math_errhandling & MATH_ERREXCEPT) is non-zero, then the underflow floating-point exception shall be raised. The following sections are informative.

EXAMPLESNone.

APPLICATION USAGEOn error, the expressions (math_errhandling & MATH_ERRNO) and (math_errhandling & MATH_ERREXCEPT) are independent of each other, but at least one of them must be non-zero.

RATIONALENone.

FUTURE DIRECTIONSNone.

SEE ALSOexp(), feclearexcept(), fetestexcept(), isnan() The Base Definitions volume of POSIX.1‐2017, Section 4.20, Treatment of Error Conditions for Mathematical Functions, <math.h>

COPYRIGHTPortions of this text are reprinted and reproduced in electronic form from IEEE Std 1003.1-2017, Standard for Information Technology -- Portable Operating System Interface (POSIX), The Open Group Base Specifications Issue 7, 2018 Edition, Copyright (C) 2018 by the Institute of Electrical and Electronics Engineers, Inc and The Open Group. In the event of any discrepancy between this version and the original IEEE and The Open Group Standard, the original IEEE and The Open Group Standard is the referee document. The original Standard can be obtained online at http://www.opengroup.org/unix/online.html . Any typographical or formatting errors that appear in this page are most likely to have been introduced during the conversion of the source files to man page format. To report such errors, see https://www.kernel.org/doc/man-pages/reporting_bugs.html . 0

Johanes Gumabo

Data Size : 22,443 byte
man-pow.3pBuild : 2024-12-05, 20:55 :
Visitor Screen : x
Visitor Counter ( page / site ) : 2 / 204,009
Visitor ID : :
Visitor IP : 3.143.17.175 :
Visitor Provider : AMAZON-02 :
Provider Position ( lat x lon ) : 39.962500 x -83.006100 : x
Provider Accuracy Radius ( km ) : 1000 :
Provider City : Columbus :
Provider Province : Ohio , : ,
Provider Country : United States :
Provider Continent : North America :
Visitor Recorder : Version :
Visitor Recorder : Library :
Online Linux Manual Page : Version : Online Linux Manual Page - Fedora.40 - march=x86-64 - mtune=generic - 24.12.05
Online Linux Manual Page : Library : lib_c - 24.10.03 - march=x86-64 - mtune=generic - Fedora.40
Online Linux Manual Page : Library : lib_m - 24.10.03 - march=x86-64 - mtune=generic - Fedora.40
Data Base : Version : Online Linux Manual Page Database - 24.04.13 - march=x86-64 - mtune=generic - fedora-38
Data Base : Library : lib_c - 23.02.07 - march=x86-64 - mtune=generic - fedora.36

Very long time ago, I have the best tutor, Wenzel Svojanovsky . If someone knows the email address of Wenzel Svojanovsky , please send an email to johanes_gumabo@yahoo.co.id .

If error, please print screen and send to johanes_gumabo@yahoo.co.id
Under development. Support me via PayPal.