sane−ibm - Online Linux Manual PageSection : 5
Updated : 13 Jul 2008
Source :
Note : SANE Scanner Access Now Easy
.IX sane−ibm
NAMEsane−ibm − SANE backend for IBM and Ricoh SCSI flatbed scanners
DESCRIPTIONThe sane−ibm library implements a SANE (Scanner Access Now Easy) backend that provides access to the IBM 2456 and the Ricoh IS-410, IS-420, and IS-430 flatbed scanners. Support for the IS-410 and IS-430 is untested. Please contact the maintainer or the sane−devel mailing list if you own such a scanner. This backend is alpha-quality. It may have bugs and some scanners haven't been tested at all. Be careful and pull the plug if the scanner causes unusual noise.
DEVICE NAMESThis backend expects device names of the form: special Where special is the path-name for the special device that corresponds to a SCSI scanner. The program sane−find−scanner(1) helps to find out the correct device. Under Linux, such a device name could be /dev/sg0 or /dev/sga, for example. See sane−scsi(5) for details.
CONFIGURATIONThe contents of the ibm.conf file is a list of device names that correspond to SCSI scanners. Empty lines and lines starting with a hash mark (#) are ignored. See sane−scsi(5) on details of what constitutes a valid device name.
FILES/etc/sane.d/ibm.conf The backend configuration file (see also description of SANE_CONFIG_DIR below). /usr/lib64/sane/libsane−ibm.a The static library implementing this backend. /usr/lib64/sane/libsane−ibm.so The shared library implementing this backend (present on systems that support dynamic loading).
ENVIRONMENTSANE_CONFIG_DIR This environment variable specifies the list of directories that may contain the configuration file. On *NIX systems, the directories are separated by a colon (`:'), under OS/2, they are separated by a semi-colon (`;'). If this variable is not set, the configuration file is searched in two default directories: first, the current working directory (".") and then in /etc/sane.d. If the value of the environment variable ends with the directory separator character, then the default directories are searched after the explicitly specified directories. For example, setting SANE_CONFIG_DIR to "/tmp/config:" would result in directories tmp/config, ., and "/etc/sane.d being searched (in this order). SANE_DEBUG_IBM If the library was compiled with debug support enabled, this environment variable controls the debug level for this backend. Higher debug levels increase the verbosity of the output.
SEE ALSOsane(7), sane−find−scanner(1), sane−scsi(5),
AUTHORmf <massifr@tiscalinet.it>
Maintained by Henning Meier-Geinitz <henning@meier−geinitz.de> 0
Johanes Gumabo
Data Size : 8,122 byte
man-sane-ibm.5Build : 2024-12-05, 20:55 :
Visitor Screen : x
Visitor Counter ( page / site ) : 2 / 202,260
Visitor ID : :
Visitor IP : 18.226.165.234 :
Visitor Provider : AMAZON-02 :
Provider Position ( lat x lon ) : 39.962500 x -83.006100 : x
Provider Accuracy Radius ( km ) : 1000 :
Provider City : Columbus :
Provider Province : Ohio , : ,
Provider Country : United States :
Provider Continent : North America :
Visitor Recorder : Version :
Visitor Recorder : Library :
Online Linux Manual Page : Version : Online Linux Manual Page - Fedora.40 - march=x86-64 - mtune=generic - 24.12.05
Online Linux Manual Page : Library : lib_c - 24.10.03 - march=x86-64 - mtune=generic - Fedora.40
Online Linux Manual Page : Library : lib_m - 24.10.03 - march=x86-64 - mtune=generic - Fedora.40
Data Base : Version : Online Linux Manual Page Database - 24.04.13 - march=x86-64 - mtune=generic - fedora-38
Data Base : Library : lib_c - 23.02.07 - march=x86-64 - mtune=generic - fedora.36
Very long time ago, I have the best tutor, Wenzel Svojanovsky . If someone knows the email address of Wenzel Svojanovsky , please send an email to johanes_gumabo@yahoo.co.id .
If error, please print screen and send to johanes_gumabo@yahoo.co.id
Under development. Support me via PayPal.
ERROR : Need New Coding : (parse_manual_page_|249|sane-ibm.5|2|IX|.IX sane\-ibm
)