sane-magicolor - Online Linux Manual PageSection : 5
Updated : 10 Jan 2011
Source :
Note : SANE Scanner Access Now Easy
NAMEsane−magicolor − SANE backend for KONICA MINOLTA magicolor scanners
DESCRIPTIONThe sane−magicolor backend supports KONICA MINOLTA magicolor scanners connected via USB or LAN. Currently, only the magicolor 1690MF device is supported, no other devices with the same scanning protocol are known.
SUPPORTED DEVICESThe following scanner should work with this backend: Device Details
−−−−−−−−−−−−−−−−−−−−−−−−−−−−−
Vendor: KONICA MINOLTA
Model: magicolor 1690MF
CONFIGURATIONThis section describes the backend's configuration file entries. The file is located at: /etc/sane.d/magicolor.conf For a proper setup, at least one of the following entries are needed: net autodiscovery
net [IP ADDRESS] [DEVICE-ID]
usb
usb [VENDOR-ID] [DEVICE-ID]
FILES/etc/sane.d/magicolor.conf The backend configuration file /usr/lib64/sane/libsane−magicolor.a The static library implementing this backend. /usr/lib64/sane/libsane−magicolor.so The shared library implementing this backend (present on systems that support dynamic loading).
ENVIRONMENTSANE_CONFIG_DIR This environment variable specifies the list of directories that may contain the configuration file. On *NIX systems, the directories are separated by a colon (`:'), under OS/2, they are separated by a semi−colon (`;'). If this variable is not set, the configuration file is searched in two default directories: first, the current working directory (".") and then in /etc/sane.d. If the value of the environment variable ends with the directory separator character, then the default directories are searched after the explicitly specified directories. For example, setting SANE_CONFIG_DIR to "/tmp/config:" would result in directories /tmp/config, ., and /etc/sane.d" being searched (in this order). SANE_DEBUG_MAGICOLOR If the library was compiled with debug support enabled, this environment variable controls the debug level for this backend. Higher debug levels increase the verbosity of the output. Example: export SANE_DEBUG_MAGICOLOR=127 To obtain debug messages from the backend, set this environment variable before calling your favorite frontend (e.g. xscanimage(1)). Example: SANE_DEBUG_MAGICOLOR=65 xscanimage
KNOWN BUGS AND RESTRICTIONSLarge color scans may sometimes timeout due to unknown reasons (the scanner simply stops returning data). Cancelling large scans may lock up the scanner.
SEE ALSOsane(7),
http://wiki.kainhofer.com/hardware/magicolor_scan
AUTHORReinhold Kainhofer <reinhold@kainhofer.com> 0
Johanes Gumabo
Data Size : 8,615 byte
man-sane-magicolor.5Build : 2024-12-05, 20:55 :
Visitor Screen : x
Visitor Counter ( page / site ) : 2 / 200,808
Visitor ID : :
Visitor IP : 3.16.130.96 :
Visitor Provider : AMAZON-02 :
Provider Position ( lat x lon ) : 39.962500 x -83.006100 : x
Provider Accuracy Radius ( km ) : 1000 :
Provider City : Columbus :
Provider Province : Ohio , : ,
Provider Country : United States :
Provider Continent : North America :
Visitor Recorder : Version :
Visitor Recorder : Library :
Online Linux Manual Page : Version : Online Linux Manual Page - Fedora.40 - march=x86-64 - mtune=generic - 24.12.05
Online Linux Manual Page : Library : lib_c - 24.10.03 - march=x86-64 - mtune=generic - Fedora.40
Online Linux Manual Page : Library : lib_m - 24.10.03 - march=x86-64 - mtune=generic - Fedora.40
Data Base : Version : Online Linux Manual Page Database - 24.04.13 - march=x86-64 - mtune=generic - fedora-38
Data Base : Library : lib_c - 23.02.07 - march=x86-64 - mtune=generic - fedora.36
Very long time ago, I have the best tutor, Wenzel Svojanovsky . If someone knows the email address of Wenzel Svojanovsky , please send an email to johanes_gumabo@yahoo.co.id .
If error, please print screen and send to johanes_gumabo@yahoo.co.id
Under development. Support me via PayPal.