sane−sm3840 - Online Linux Manual PageSection : 5
Updated : 11 Jul 2008
Source :
Note : SANE Scanner Access Now Easy
.IX sane−sm3840
NAMEsane−sm3840 − SANE backend for Microtek scanners with SCAN08 USB chip
DESCRIPTIONThe sane−sm3840 library implements a SANE (Scanner Access Now Easy) backend that provides access to some Microtek scanners with the SCAN08 USB chip. There exist backends for Microtek scanners with SCSI command set. Refer to sane−microtek(5) and sane−microtek2(5) for details. There also exists a Microtek 3600 series driver, see sane−sm3600(5) for details. At present, the following scanners are known positively to work with this backend: Vendor Product ID: Remark:
-------- -------------- -----------
Microtek ScanMaker 3840 All modes OK
Microtek ScanMaker 4800 All modes OKIf you own a Microtek scanner with the SCAN08 chip other than the ones listed above, it may or may not work with SANE. Feel free to contact the backend author (earle@ziplabel.com) to report results with scanners not on the list.
FRONTEND OPTIONSThe following options are supported by the sane−sm3840 driver: −−mode color|gray|lineart|halftone Color or grayscale mode. −−resolution 150|300|600|1200 Pixels per inch for scans. −−depth 8|16 Note that the least significant bits of 16bpp mode may be noise. −−brightness 1..4096 Higher numbers increase brightness of returned image. −−contrast 0.1..9.9 Larger numbers decrease contrast of returned image. −−lamp−timeout 1..15 Time in minutes until the lamp is turned off after a scan.
CONFIGURATIONThis backend does not support a configuration file right now.
FILES/usr/lib64/sane/libsane−sm3840.a The static library implementing this backend. /usr/lib64/sane/libsane−sm3840.so The shared library implementing this backend (present on systems that support dynamic loading).
ENVIRONMENTSANE_DEBUG_SM3840 If the library was compiled with debug support enabled, this environment variable controls the debug level for this backend. E.g., a value of 128 requests all debug output to be printed. Smaller levels reduce verbosity. To see error messages on stderr set SANE_DEBUG_SM3840 to 1.
SEE ALSOsane(7), sane−microtek(5), sane−microtek2(5), sane−sm3600(5)
http://www.ziplabel.com/sm3840
AUTHOREarle F. Philhower III <earle@ziplabel.com> 0
Johanes Gumabo
Data Size : 8,888 byte
man-sane-sm3840.5Build : 2024-12-05, 20:55 :
Visitor Screen : x
Visitor Counter ( page / site ) : 2 / 199,713
Visitor ID : :
Visitor IP : 52.15.35.129 :
Visitor Provider : AMAZON-02 :
Provider Position ( lat x lon ) : 39.962500 x -83.006100 : x
Provider Accuracy Radius ( km ) : 1000 :
Provider City : Columbus :
Provider Province : Ohio , : ,
Provider Country : United States :
Provider Continent : North America :
Visitor Recorder : Version :
Visitor Recorder : Library :
Online Linux Manual Page : Version : Online Linux Manual Page - Fedora.40 - march=x86-64 - mtune=generic - 24.12.05
Online Linux Manual Page : Library : lib_c - 24.10.03 - march=x86-64 - mtune=generic - Fedora.40
Online Linux Manual Page : Library : lib_m - 24.10.03 - march=x86-64 - mtune=generic - Fedora.40
Data Base : Version : Online Linux Manual Page Database - 24.04.13 - march=x86-64 - mtune=generic - fedora-38
Data Base : Library : lib_c - 23.02.07 - march=x86-64 - mtune=generic - fedora.36
Very long time ago, I have the best tutor, Wenzel Svojanovsky . If someone knows the email address of Wenzel Svojanovsky , please send an email to johanes_gumabo@yahoo.co.id .
If error, please print screen and send to johanes_gumabo@yahoo.co.id
Under development. Support me via PayPal.
ERROR : Need New Coding : (parse_manual_page_|249|sane-sm3840.5|2|IX|.IX sane\-sm3840
)