sane−teco1 - Online Linux Manual PageSection : 5
Updated : 14 Jul 2008
Source :
Note : SANE Scanner Access Now Easy
.IX sane−teco1
NAMEsane−teco1 − SANE backend for TECO / RELISYS scanners
DESCRIPTIONThe sane−teco1 library implements a SANE (Scanner Access Now Easy) backend that provides access to some TECO SCSI flatbed scanners. This backend should be considered beta-quality software! TECO scanners are sold under various brands like RELISYS, PIOTECH, TRUST. This backend may or may not support yours. The scanners that should work with this backend are: Vendor Model TECO model status
---------------------- -------------- -----------
Relisys AVEC 2400 VM3520 tested
Relisys AVEC 2412 VM3520+ tested
Relisys AVEC 4800 VM4530 untested
Relisys AVEC 4816 VM4530+ untested
Relisys RELI 2400 VM3530 untested
Relisys RELI 2412 VM3530+ tested
Relisys RELI 2412 VM3530+ untested
Relisys RELI 4816 VM4540 tested
Relisys RELI 4830 VM4542 tested
Relisys RELI 9600 VM6530 untested
Relisys RELI 9612 VM6530* untested
Relisys RELI 9624 VM6530+ untested
Relisys RELI 9630 VM6540 untested
Relisys RELI DS15 VM3440 untested
Relisys RELI DS6 VM3420 untested
Dextra DF-600P VM3510 tested
Dextra DF-4830T VM4542 untested
Dextra DF-1200T+ VM3530+ untested
Dextra DF-9624 VM6530+ untestedNote that the untested scanner will not be directly supported. You should contact the author for that. The TECO VM number can usually be found at the back of the scanner. It is also part of the FCC ID. sane−find−scanner −v will also show the SCSI inquiry, and if it is a TECO scanner, the name will be there too. The options the backend supports can either be selected through command line options to programs like scanimage(1) or through GUI elements in xscanimage(1) or xsane(1).
If you have any success with a scanner not listed here, or if you notice any strange behavior, please report to the backend maintainer or to the SANE mailing list. Valid command line options and their syntax can be listed by using: scanimage −−help −d teco1 Scan Mode −−mode Black & White|Grayscale|Color Selects the basic mode of operation of the scanner. Valid choices are Black & White, Grayscale" and Color. The Black & White mode is for black and white only (1 bit). Grayscale will produce 256 levels of gray (8 bits). Color will produce a 24 bit color image. −−resolution 1..600 Selects the resolution for a scan. The scanner can do all resolutions between 1 and 600, in increments of 1. Geometry options −l −t −x −y Controls the scan area: −l sets the top left x coordinate, −t the top left y coordinate, −x selects the width and −y the height of the scan area. All parameters are specified in millimeters by default. Enhancement options −−custom−gamma (color mode only) allows the user to specify a gamma table (see the next 3 parameters). −−red−gamma−table Can be used to download a user defined gamma table for the red channel. The table must be 256 bytes long. Color mode only. −−green−gamma−table Can be used to download a user defined gamma table for the green channel. The table must be 256 bytes long. Color mode only. −−blue−gamma−table Can be used to download a user defined gamma table for the blue channel. The table must be 256 bytes long. Color mode only. −−dither Line art|2x2|3x3|4x4 bayer|4x4 smooth|8x8 bayer|8x8 smooth|8x8 horizontal|8x8 vertical Select the dither mask to use. Black & White only. −−preview Requests a preview scan. The resolution used is 22 dpi and the scan area is the maximum allowed. The scan mode is user selected. The default is "no".
CONFIGURATION FILEThe configuration file /etc/sane.d/teco1.conf supports only one item: the device name to use (eg /dev/scanner).
FILES/usr/lib64/sane/libsane−teco1.a The static library implementing this backend. /usr/lib64/sane/libsane−teco1.so The shared library implementing this backend (present on systems that support dynamic loading).
ENVIRONMENTSANE_DEBUG_TECO1 If the library was compiled with debug support enabled, this environment variable controls the debug level for this backend. E.g., a value of 128 requests all debug output to be printed. Smaller levels reduce verbosity.
LIMITATIONSThe windows TWAIN driver has many more options than this SANE backend. However they are only software adjustments. This backend only implements what the scanner can support.
BUGSNone known.
SEE ALSOsane−scsi(5), scanimage(1), xscanimage(1), xsane(1), sane(7)
AUTHORThe package is actively maintained by Frank Zago. http://www.zago.net/sane/#teco
CREDITSThanks to Gerard Delafond for the VM4542 support. Thanks to Jean-Yves Simon for the VM3510 support. 0
Johanes Gumabo
Data Size : 14,893 byte
man-sane-teco1.5Build : 2024-12-05, 20:55 :
Visitor Screen : x
Visitor Counter ( page / site ) : 3 / 202,196
Visitor ID : :
Visitor IP : 18.119.116.125 :
Visitor Provider : AMAZON-02 :
Provider Position ( lat x lon ) : 39.962500 x -83.006100 : x
Provider Accuracy Radius ( km ) : 1000 :
Provider City : Columbus :
Provider Province : Ohio , : ,
Provider Country : United States :
Provider Continent : North America :
Visitor Recorder : Version :
Visitor Recorder : Library :
Online Linux Manual Page : Version : Online Linux Manual Page - Fedora.40 - march=x86-64 - mtune=generic - 24.12.05
Online Linux Manual Page : Library : lib_c - 24.10.03 - march=x86-64 - mtune=generic - Fedora.40
Online Linux Manual Page : Library : lib_m - 24.10.03 - march=x86-64 - mtune=generic - Fedora.40
Data Base : Version : Online Linux Manual Page Database - 24.04.13 - march=x86-64 - mtune=generic - fedora-38
Data Base : Library : lib_c - 23.02.07 - march=x86-64 - mtune=generic - fedora.36
Very long time ago, I have the best tutor, Wenzel Svojanovsky . If someone knows the email address of Wenzel Svojanovsky , please send an email to johanes_gumabo@yahoo.co.id .
If error, please print screen and send to johanes_gumabo@yahoo.co.id
Under development. Support me via PayPal.
ERROR : Need New Coding : (parse_manual_page_|249|sane-teco1.5|2|IX|.IX sane\-teco1
)