solterm - Online Linux Manual PageSection : 1
Updated : 05/13/03
Source : OpenIPMI
Note : IPMI Serial over LAN program

NAMEsolterm − An IPMI Serial over LAN program

SYNOPSISsolterm <connection parms> [−e escape_char] [−notencrypted] [−notauthenticated] [−bitrate (9600|19200|38400|57600|115200)] [-alerts (succeed|defer|fail)] [−holdoff] [−ack-retries n] [−ack-timeout microseconds] [−v] [−q]

DESCRIPTIONThe solterm program allows a user to make a remote serial connection over IPMI. The requires that the remote system support IPMI 2.0 Serial Over LAN.

OPTIONS<connection parms>  The parameters for the connection depend on the connection type. These are all described in openipmi_conparms (7) −e escape_char  The character to use to escape, or exit, the program. Entering this chatacter right after a newline is entered causes the program to go into command mode. A single character after this performs a command. The default escape character is "~" as shown below. Suppported commands are: ~. Terminate the program ~B Send a serial BREAK over the connection ~F Flush all buffers ~R Assert the Ring Indicator (RI) line ~r Deassert the Ring Indicator (RI) line ~D Assert DCD and DSR lines ~d Deassert DCD and DSR lines ~C Pause the output using CTS ~c Put CTS under BMC control ~? Help on escape commands ~~ Enter the escape character twice to send it. −notencrypted  Do not encrypt the SOL data going over the connection. −notauthenticated  Do not do integrity checks on the SOL data going over the connection. −bitrate  Set the bitrate to the given value. The default is whatever the BMC has set it to. −alerts  This specifies what to do if a alert that requires a callout occurs on the line. succeed specifies that serial/modem alerts are to succeed while SoL is active. deferred specifies that serial/modem alerts are to be deferred for the duration of the SoL session. fail specifies that serial/modem alerts automatically fail during the SoL session. This is the default. −holdoff  Specifies that CTS, DTR, and DSR are to be deasserted at the start of the SoL session so that the configuration may be modifeid before the handshake is released. −v  Be more verbose. Maybe specified multiple time for more output. −q  Be less verbose. Maybe specified multiple time for less output.

SEE ALSOopenipmi_conparms(7)

KNOWN PROBLEMSNone

AUTHORDarius Davis <dariusd@users.sourceforge.net>
0
Johanes Gumabo
Data Size   :   11,729 byte
man-solterm.1Build   :   2024-12-05, 20:55   :  
Visitor Screen   :   x
Visitor Counter ( page / site )   :   2 / 199,337
Visitor ID   :     :  
Visitor IP   :   18.117.119.34   :  
Visitor Provider   :   AMAZON-02   :  
Provider Position ( lat x lon )   :   39.962500 x -83.006100   :   x
Provider Accuracy Radius ( km )   :   1000   :  
Provider City   :   Columbus   :  
Provider Province   :   Ohio ,   :   ,
Provider Country   :   United States   :  
Provider Continent   :   North America   :  
Visitor Recorder   :   Version   :  
Visitor Recorder   :   Library   :  
Online Linux Manual Page   :   Version   :   Online Linux Manual Page - Fedora.40 - march=x86-64 - mtune=generic - 24.12.05
Online Linux Manual Page   :   Library   :   lib_c - 24.10.03 - march=x86-64 - mtune=generic - Fedora.40
Online Linux Manual Page   :   Library   :   lib_m - 24.10.03 - march=x86-64 - mtune=generic - Fedora.40
Data Base   :   Version   :   Online Linux Manual Page Database - 24.04.13 - march=x86-64 - mtune=generic - fedora-38
Data Base   :   Library   :   lib_c - 23.02.07 - march=x86-64 - mtune=generic - fedora.36

Very long time ago, I have the best tutor, Wenzel Svojanovsky . If someone knows the email address of Wenzel Svojanovsky , please send an email to johanes_gumabo@yahoo.co.id .
If error, please print screen and send to johanes_gumabo@yahoo.co.id
Under development. Support me via PayPal.