STAPRUN - Online Linux Manual PageSection : 8

NAMEstaprun − systemtap runtime

SYNOPSIS
staprun [ OPTIONS ] MODULE [ MODULE-OPTIONS ]

DESCRIPTIONThe staprun program is the back-end of the Systemtap tool. It expects a kernel module produced by the front-end stap tool. Splitting the systemtap tool into a front-end and a back-end allows a user to compile a systemtap script on a development machine that has the kernel development tools (needed to compile the script) and then transfer the resulting kernel module to a production machine that doesn't have any development tools installed. Please refer to stappaths (7) for the version number, or run rpm −q systemtap (fedora/red hat) apt−get −v systemtap (ubuntu)

OPTIONSThe staprun program supports the following options. Any other option prints a list of supported options. −v  Verbose mode. The level of verbosity is also set in the SYSTEMTAP_VERBOSE environment variable. −V  Print version number and exit. −w  Suppress warnings from the script. −u  Load the uprobes.ko module. −c CMD  Command CMD will be run and the staprun program will exit when CMD does. The '_stp_target' variable will contain the pid for CMD. −x PID  The '_stp_target' variable will be set to PID. −o FILE  Send output to FILE. If the module uses bulk mode, the output will be in percpu files FILE_x(FILE_cpux in background and bulk mode) where 'x' is the cpu number. This supports strftime(3) formats for FILE. −b BUFFER_SIZE  The systemtap module will specify a buffer size. Setting one here will override that value. The value should be an integer between 1 and 4095 which be assumed to be the buffer size in MB. That value will be per-cpu if bulk mode is used. −L  Load module and start probes, then detach from the module leaving the probes running. The module can be attached to later by using the −A option. −A  Attach to loaded systemtap module. −C WHEN  Control coloring of error messages. WHEN must be either "never", "always", or "auto" (i.e. enable only if at a terminal). If the option is missing, then "auto" is assumed. Colors can be modified using the SYSTEMTAP_COLORS environment variable. See the stap(1) manual page for more information on syntax and behaviour. −d  Delete a module. Only detached or unused modules the user has permission to access will be deleted. Use "*" (quoted) to delete all unused modules. −D  Run staprun in background as a daemon and show it's pid. −R  Rename the module to a unique name before inserting it. −r N:URI  Pass the given number and URI data to the tapset functions remote_id() and remote_uri(). −S size[,N]  Sets the maximum size of output file and the maximum number of output files. If the size of output file will exceed size , systemtap switches output file to the next file. And if the number of output files exceed N , systemtap removes the oldest output file. You can omit the second argument. −T timeout  Sets maximum time reader thread will wait before dumping trace buffer. Value is in ms, default is 200ms. Setting this to a high value decreases number of stapio wake-ups, allowing deeper sleep for embedded platforms. But it impacts interactivity on terminal as traces are dumped less often in case of low throughput. There is no interactivity or performance impact for high throughput as trace is dumped when buffer is full, before this timeout expires. var1=val  Sets the value of global variable var1 to val. Global variables contained within a module are treated as module options and can be set from the staprun command line.

ARGUMENTSMODULE is either a module path or a module name. If it is a module name, the module will be looked for in the following directory (where 'VERSION' is the output of "uname −r"): /lib/modules/VERSION/systemtap Any additional arguments on the command line are passed to the module. One use of these additional module arguments is to set the value of global variables declared within the module. ​ $ stap −p4 −m mod1 −e 'global var1="foo"; probe begin{printf("%s\n", var1); exit()}\[aq]
Running this with an additional module argument: ​ $ staprun mod1.ko var1="HelloWorld"
​ HelloWorld
Spaces and exclamation marks currently cannot be passed into global variables this way.

EXAMPLESSee the stapex(3stap) manual page for a collection of sample scripts. Here is a very basic example of how to use staprun. First, use stap to compile a script. The stap program will report the pathname to the resulting module. ​ $ stap −p4 −e 'probe begin { printf("Hello World!\n"); exit() }\[aq]
​ /home/user/.systemtap/cache/85/stap_8553d83f78c_265.ko
Run staprun with the pathname to the module as an argument. ​ $ staprun /home/user/.systemtap/cache/85/stap_8553d83f78c_265.ko
​ Hello World!

MODULE DETACHING AND ATTACHINGAfter the staprun program installs a Systemtap kernel module, users can detach from the kernel module and reattach to it later. The −L option loads the module and automatically detaches. Users can also detach from the kernel module interactively by sending the SIGQUIT signal from the keyboard (typically by typing Ctrl−​. To reattach to a kernel module, the staprun −A option would be used.

FILE SWITCHING BY SIGNALAfter staprun launched the stapio program, users can command it to switch output file to next file when it outputs to file(s) (running staprun with −o option) by sending a SIGUSR2 signal to the stapio process. When it receives SIGUSR2, it will switch output file to new file with suffix .N where N is the sequential number. For example, ​ $ staprun −o foo ... outputs trace logs to foo and if it receives SIGUSR2 signal, it switches output to foo.1 file. And receiving SIGUSR2 again, it switches to foo.2 file.

SAFETY AND SECURITYSystemtap, in the default kernel-module runtime mode, is an administrative tool. It exposes kernel internal data structures and potentially private user information. See the stap(1) manual page for additional information on safety and security. To increase system security, users of systemtap must be root, or in the stapusr group in order to execute this setuid staprun program. A user may select a particular privilege level with the stap −−privilege= option, which staprun will later enforce. stapdev  Members of the stapdev group can write and load script modules with root-equivalent privileges, without particular security constraints. (Many safety constraints remain.) stapsys  Members of the stapsys group have almost all the privileges of stapdev, except for guru mode constructs. stapusr  Members only of the stapusr group may any-privileged modules placed into the /lib/modules/VERSION/systemtap by the system administrator. stapusr  Members only of the stapusr group may also write and load low-privilege script modules, which are normally limited to manipulating their own processes (and not the kernel nor other users' processes). Part of the privilege enforcement mechanism may require using a stap-server and administrative trust in its cryptographic signer; see the stap−server(8) manual page for a for more information. On a kernel with FIPS mode enabled, staprun normally refuses to attempt to load systemtap-generated kernel modules. This is because on some kernels, this results in a panic. If your kernel includes corrections such as linux commit #002c77a48b47, then you can force staprun to attempt module loads anyway, by setting the STAP\_FIPS\_OVERRIDE environment variable to any value.

FILES/lib/modules/VERSION/systemtap  If MODULE is a module name, the module will be looked for in this directory. Users who are only in the 'stapusr' group can install modules located in this directory. This directory must be owned by the root user and not be world writable.

SEE ALSOstap(1), stapprobes(3stap), stap−server(8), stapdyn(8), stapex(3stap)

BUGSUse the Bugzilla link of the project web page or our mailing list. http://sourceware.org/systemtap/, <systemtap@sourceware.org>.
0
Johanes Gumabo
Data Size   :   22,507 byte
man-staprun.8Build   :   2024-12-05, 20:55   :  
Visitor Screen   :   x
Visitor Counter ( page / site )   :   4 / 182,280
Visitor ID   :     :  
Visitor IP   :   3.133.136.95   :  
Visitor Provider   :   AMAZON-02   :  
Provider Position ( lat x lon )   :   39.962500 x -83.006100   :   x
Provider Accuracy Radius ( km )   :   1000   :  
Provider City   :   Columbus   :  
Provider Province   :   Ohio ,   :   ,
Provider Country   :   United States   :  
Provider Continent   :   North America   :  
Visitor Recorder   :   Version   :  
Visitor Recorder   :   Library   :  
Online Linux Manual Page   :   Version   :   Online Linux Manual Page - Fedora.40 - march=x86-64 - mtune=generic - 24.12.05
Online Linux Manual Page   :   Library   :   lib_c - 24.10.03 - march=x86-64 - mtune=generic - Fedora.40
Online Linux Manual Page   :   Library   :   lib_m - 24.10.03 - march=x86-64 - mtune=generic - Fedora.40
Data Base   :   Version   :   Online Linux Manual Page Database - 24.04.13 - march=x86-64 - mtune=generic - fedora-38
Data Base   :   Library   :   lib_c - 23.02.07 - march=x86-64 - mtune=generic - fedora.36

Very long time ago, I have the best tutor, Wenzel Svojanovsky . If someone knows the email address of Wenzel Svojanovsky , please send an email to johanes_gumabo@yahoo.co.id .
If error, please print screen and send to johanes_gumabo@yahoo.co.id
Under development. Support me via PayPal.

ERROR : Need New Coding :         (rof_nr_x|149|staprun.8|149|\n", var1); ══a─══exit══─⧽─══exit()══─a══}\[aq] |\& $ stap \-p4 \-m mod1 \-e\ \[aq]global var1="foo"; probe begin{printf("%s\\n", var1); exit()}\[aq] )         (rof_nr_x|149|staprun.8|175|\n"); ══a─══exit══─⧽─══exit()══─a══ }\[aq] |\& $ stap \-p4 \-e \[aq]probe begin { printf("Hello World!\\n"); exit() }\[aq] )         (rof_escape_sequence|91|staprun.8|289|\_FIPS\_OVERRIDE |.BR STAP\_FIPS\_OVERRIDE )