tor_selinux - Online Linux Manual PageSection : 8
Updated : 21-04-01
Source : tor
Note : SELinux Policy tor
NAMEtor_selinux − Security Enhanced Linux Policy for the tor processes
DESCRIPTIONSecurity-Enhanced Linux secures the tor processes via flexible mandatory access control. The tor processes execute with the tor_t SELinux type. You can check if you have these processes running by executing the ps command with the −Z qualifier. For example: ps -eZ | grep tor_t
ENTRYPOINTSThe tor_t SELinux type can be entered via the tor_exec_t file type. The default entrypoint paths for the tor_t domain are the following: /usr/bin/tor, /usr/sbin/tor
PROCESS TYPESSELinux defines process types (domains) for each process running on the system You can see the context of a process using the −Z option to ps Policy governs the access confined processes have to files. SELinux tor policy is very flexible allowing users to setup their tor processes in as secure a method as possible. The following process types are defined for tor: tor_tNote: semanage permissive -a tor_t can be used to make the process type tor_t permissive. SELinux does not deny access to permissive process types, but the AVC (SELinux denials) messages are still generated.
BOOLEANSSELinux policy is customizable based on least access required. tor policy is extremely flexible and has several booleans that allow you to manipulate the policy and run tor with the tightest access possible. If you want to determine whether tor can bind tcp sockets to all unreserved ports, you must turn on the tor_bind_all_unreserved_ports boolean. Disabled by default. setsebool -P tor_bind_all_unreserved_ports 1
If you want to allow tor to act as a relay, you must turn on the tor_can_network_relay boolean. Disabled by default. setsebool -P tor_can_network_relay 1
If you want to allow all domains to execute in fips_mode, you must turn on the fips_mode boolean. Enabled by default. setsebool -P fips_mode 1
PORT TYPESSELinux defines port types to represent TCP and UDP ports. You can see the types associated with a port by using the following command: semanage port -l Policy governs the access confined processes have to these ports. SELinux tor policy is very flexible allowing users to setup their tor processes in as secure a method as possible. The following port types are defined for tor: tor_port_t
Default Defined Ports: tcp 6969,9001,9030,9050,9051,9150
MANAGED FILESThe SELinux process type tor_t can manage files labeled with the following file types. The paths listed are the default paths for these file types. Note the processes UID still need to have DAC permissions.
cluster_conf_t /etc/cluster(/.*)?
cluster_var_lib_t /var/lib/pcsd(/.*)?
/var/lib/cluster(/.*)?
/var/lib/openais(/.*)?
/var/lib/pengine(/.*)?
/var/lib/corosync(/.*)?
/usr/lib/heartbeat(/.*)?
/var/lib/heartbeat(/.*)?
/var/lib/pacemaker(/.*)?
cluster_var_run_t /var/run/crm(/.*)?
/var/run/cman_.*
/var/run/rsctmp(/.*)?
/var/run/aisexec.*
/var/run/heartbeat(/.*)?
/var/run/pcsd-ruby.socket
/var/run/corosync-qnetd(/.*)?
/var/run/corosync-qdevice(/.*)?
/var/run/corosync.pid
/var/run/cpglockd.pid
/var/run/rgmanager.pid
/var/run/cluster/rgmanager.sk
root_t /sysroot/ostree/deploy/.*-atomic/deploy(/.*)?
/
/initrd
tor_var_lib_t /var/lib/tor(/.*)?
/var/lib/tor-data(/.*)?
tor_var_run_t /var/run/tor(/.*)?
FILE CONTEXTSSELinux requires files to have an extended attribute to define the file type. You can see the context of a file using the −Z option to ls Policy governs the access confined processes have to these files. SELinux tor policy is very flexible allowing users to setup their tor processes in as secure a method as possible. EQUIVALENCE DIRECTORIES tor policy stores data with multiple different file context types under the /var/lib/tor directory. If you would like to store the data in a different directory you can use the semanage command to create an equivalence mapping. If you wanted to store this data under the /srv directory you would execute the following command: semanage fcontext -a -e /var/lib/tor /srv/tor
restorecon -R -v /srv/tor STANDARD FILE CONTEXT SELinux defines the file context types for the tor, if you wanted to store files with these types in a diffent paths, you need to execute the semanage command to sepecify alternate labeling and then use restorecon to put the labels on disk. semanage fcontext -a -t tor_unit_file_t '/srv/mytor_content(/.*)?'
restorecon -R -v /srv/mytor_content Note: SELinux often uses regular expressions to specify labels that match multiple files. The following file types are defined for tor: tor_etc_t- Set files with the tor_etc_t type, if you want to store tor files in the /etc directories. tor_exec_t- Set files with the tor_exec_t type, if you want to transition an executable to the tor_t domain.
Paths: /usr/bin/tor, /usr/sbin/tor tor_initrc_exec_t- Set files with the tor_initrc_exec_t type, if you want to transition an executable to the tor_initrc_t domain. tor_unit_file_t- Set files with the tor_unit_file_t type, if you want to treat the files as tor unit content. tor_var_lib_t- Set files with the tor_var_lib_t type, if you want to store the tor files under the /var/lib directory.
Paths: /var/lib/tor(/.*)?, /var/lib/tor-data(/.*)? tor_var_log_t- Set files with the tor_var_log_t type, if you want to treat the data as tor var log data, usually stored under the /var/log directory. tor_var_run_t- Set files with the tor_var_run_t type, if you want to store the tor files under the /run or /var/run directory. Note: File context can be temporarily modified with the chcon command. If you want to permanently change the file context you need to use the semanage fcontext command. This will modify the SELinux labeling database. You will need to use restorecon to apply the labels.
COMMANDSsemanage fcontext can also be used to manipulate default file context mappings. semanage permissive can also be used to manipulate whether or not a process type is permissive. semanage module can also be used to enable/disable/install/remove policy modules. semanage port can also be used to manipulate the port definitions semanage boolean can also be used to manipulate the booleans system-config-selinux is a GUI tool available to customize SELinux policy settings.
AUTHORThis manual page was auto-generated using sepolicy manpage".
SEE ALSOselinux(8), tor(8), semanage(8), restorecon(8), chcon(1), sepolicy(8), setsebool(8) 0
Johanes Gumabo
Data Size : 21,384 byte
man-tor_selinux.8Build : 2024-12-05, 20:55 :
Visitor Screen : x
Visitor Counter ( page / site ) : 3 / 185,958
Visitor ID : :
Visitor IP : 18.227.52.111 :
Visitor Provider : AMAZON-02 :
Provider Position ( lat x lon ) : 39.962500 x -83.006100 : x
Provider Accuracy Radius ( km ) : 1000 :
Provider City : Columbus :
Provider Province : Ohio , : ,
Provider Country : United States :
Provider Continent : North America :
Visitor Recorder : Version :
Visitor Recorder : Library :
Online Linux Manual Page : Version : Online Linux Manual Page - Fedora.40 - march=x86-64 - mtune=generic - 24.12.05
Online Linux Manual Page : Library : lib_c - 24.10.03 - march=x86-64 - mtune=generic - Fedora.40
Online Linux Manual Page : Library : lib_m - 24.10.03 - march=x86-64 - mtune=generic - Fedora.40
Data Base : Version : Online Linux Manual Page Database - 24.04.13 - march=x86-64 - mtune=generic - fedora-38
Data Base : Library : lib_c - 23.02.07 - march=x86-64 - mtune=generic - fedora.36
Very long time ago, I have the best tutor, Wenzel Svojanovsky . If someone knows the email address of Wenzel Svojanovsky , please send an email to johanes_gumabo@yahoo.co.id .
If error, please print screen and send to johanes_gumabo@yahoo.co.id
Under development. Support me via PayPal.