webalizer_selinux - Online Linux Manual PageSection : 8
Updated : 21-04-01
Source : webalizer
Note : SELinux Policy webalizer

NAMEwebalizer_selinux − Security Enhanced Linux Policy for the webalizer processes

DESCRIPTIONSecurity-Enhanced Linux secures the webalizer processes via flexible mandatory access control. The webalizer processes execute with the webalizer_t SELinux type. You can check if you have these processes running by executing the ps command with the −Z qualifier. For example: ps -eZ | grep webalizer_t

ENTRYPOINTSThe webalizer_t SELinux type can be entered via the webalizer_exec_t file type. The default entrypoint paths for the webalizer_t domain are the following: /usr/bin/awffull, /usr/bin/webalizer, /usr/bin/webazolver

PROCESS TYPESSELinux defines process types (domains) for each process running on the system You can see the context of a process using the −Z option to ps Policy governs the access confined processes have to files. SELinux webalizer policy is very flexible allowing users to setup their webalizer processes in as secure a method as possible. The following process types are defined for webalizer: webalizer_t, webalizer_script_tNote: semanage permissive -a webalizer_t can be used to make the process type webalizer_t permissive. SELinux does not deny access to permissive process types, but the AVC (SELinux denials) messages are still generated.

BOOLEANSSELinux policy is customizable based on least access required. webalizer policy is extremely flexible and has several booleans that allow you to manipulate the policy and run webalizer with the tightest access possible. If you want to allow all domains to execute in fips_mode, you must turn on the fips_mode boolean. Enabled by default. setsebool -P fips_mode 1

MANAGED FILESThe SELinux process type webalizer_t can manage files labeled with the following file types. The paths listed are the default paths for these file types. Note the processes UID still need to have DAC permissions.
anon_inodefs_t
httpd_sys_content_t /srv/([^/]*/)?www(/.*)?
/var/www(/.*)?
/etc/htdig(/.*)?
/srv/gallery2(/.*)?
/var/lib/trac(/.*)?
/var/lib/htdig(/.*)?
/var/www/icons(/.*)?
/usr/share/glpi(/.*)?
/usr/share/htdig(/.*)?
/usr/share/drupal.*
/usr/share/z-push(/.*)?
/var/www/svn/conf(/.*)?
/usr/share/icecast(/.*)?
/var/lib/cacti/rra(/.*)?
/usr/share/ntop/html(/.*)?
/usr/share/nginx/html(/.*)?
/usr/share/doc/ghc/html(/.*)?
/usr/share/openca/htdocs(/.*)?
/usr/share/selinux-policy[^/]*/html(/.*)?

webalizer_rw_content_t /var/www/usage(/.*)?

webalizer_var_lib_t /var/lib/webalizer(/.*)?

FILE CONTEXTSSELinux requires files to have an extended attribute to define the file type. You can see the context of a file using the −Z option to ls Policy governs the access confined processes have to these files. SELinux webalizer policy is very flexible allowing users to setup their webalizer processes in as secure a method as possible. STANDARD FILE CONTEXT SELinux defines the file context types for the webalizer, if you wanted to store files with these types in a diffent paths, you need to execute the semanage command to sepecify alternate labeling and then use restorecon to put the labels on disk. semanage fcontext -a -t webalizer_ra_content_t '/srv/mywebalizer_content(/.*)?'
restorecon -R -v /srv/mywebalizer_content Note: SELinux often uses regular expressions to specify labels that match multiple files. The following file types are defined for webalizer:
webalizer_content_t- Set files with the webalizer_content_t type, if you want to treat the files as webalizer content. webalizer_etc_t- Set files with the webalizer_etc_t type, if you want to store webalizer files in the /etc directories. webalizer_exec_t- Set files with the webalizer_exec_t type, if you want to transition an executable to the webalizer_t domain.
Paths:  /usr/bin/awffull, /usr/bin/webalizer, /usr/bin/webazolver webalizer_htaccess_t- Set files with the webalizer_htaccess_t type, if you want to treat the file as a webalizer access file. webalizer_ra_content_t- Set files with the webalizer_ra_content_t type, if you want to treat the files as webalizer read/append content. webalizer_rw_content_t- Set files with the webalizer_rw_content_t type, if you want to treat the files as webalizer read/write content. webalizer_script_exec_t- Set files with the webalizer_script_exec_t type, if you want to transition an executable to the webalizer_script_t domain. webalizer_tmp_t- Set files with the webalizer_tmp_t type, if you want to store webalizer temporary files in the /tmp directories. webalizer_usage_t- Set files with the webalizer_usage_t type, if you want to treat the files as webalizer usage data. webalizer_var_lib_t- Set files with the webalizer_var_lib_t type, if you want to store the webalizer files under the /var/lib directory. webalizer_write_t- Set files with the webalizer_write_t type, if you want to treat the files as webalizer read/write content. Note: File context can be temporarily modified with the chcon command. If you want to permanently change the file context you need to use the semanage fcontext command. This will modify the SELinux labeling database. You will need to use restorecon to apply the labels.

COMMANDSsemanage fcontext can also be used to manipulate default file context mappings. semanage permissive can also be used to manipulate whether or not a process type is permissive. semanage module can also be used to enable/disable/install/remove policy modules. semanage boolean can also be used to manipulate the booleans system-config-selinux is a GUI tool available to customize SELinux policy settings.

AUTHORThis manual page was auto-generated using sepolicy manpage".

SEE ALSOselinux(8), webalizer(8), semanage(8), restorecon(8), chcon(1), sepolicy(8), setsebool(8), webalizer_script_selinux(8), webalizer_script_selinux(8)
0
Johanes Gumabo
Data Size   :   19,443 byte
man-webalizer_selinux.8Build   :   2024-12-05, 20:55   :  
Visitor Screen   :   x
Visitor Counter ( page / site )   :   3 / 165,764
Visitor ID   :     :  
Visitor IP   :   18.188.218.134   :  
Visitor Provider   :   AMAZON-02   :  
Provider Position ( lat x lon )   :   39.962500 x -83.006100   :   x
Provider Accuracy Radius ( km )   :   1000   :  
Provider City   :   Columbus   :  
Provider Province   :   Ohio ,   :   ,
Provider Country   :   United States   :  
Provider Continent   :   North America   :  
Visitor Recorder   :   Version   :  
Visitor Recorder   :   Library   :  
Online Linux Manual Page   :   Version   :   Online Linux Manual Page - Fedora.40 - march=x86-64 - mtune=generic - 24.12.05
Online Linux Manual Page   :   Library   :   lib_c - 24.10.03 - march=x86-64 - mtune=generic - Fedora.40
Online Linux Manual Page   :   Library   :   lib_m - 24.10.03 - march=x86-64 - mtune=generic - Fedora.40
Data Base   :   Version   :   Online Linux Manual Page Database - 24.04.13 - march=x86-64 - mtune=generic - fedora-38
Data Base   :   Library   :   lib_c - 23.02.07 - march=x86-64 - mtune=generic - fedora.36

Very long time ago, I have the best tutor, Wenzel Svojanovsky . If someone knows the email address of Wenzel Svojanovsky , please send an email to johanes_gumabo@yahoo.co.id .
If error, please print screen and send to johanes_gumabo@yahoo.co.id
Under development. Support me via PayPal.