X86_ENERGY_PERF_POLICY - Online Linux Manual PageSection : 8
NAMEx86_energy_perf_policy − read or write MSR_IA32_ENERGY_PERF_BIAS
SYNOPSISx86_energy_perf_policy [−c cpu] [−v] −r
x86_energy_perf_policy [−c cpu] [−v] 'performance'
x86_energy_perf_policy [−c cpu] [−v] 'normal'
x86_energy_perf_policy [−c cpu] [−v] 'powersave'
x86_energy_perf_policy [−c cpu] [−v] n
DESCRIPTIONx86_energy_perf_policy allows software to convey its policy for the relative importance of performance versus energy savings to the processor. The processor uses this information in model-specific ways when it must select trade-offs between performance and energy efficiency. This policy hint does not supersede Processor Performance states (P-states) or CPU Idle power states (C-states), but allows software to have influence where it would otherwise be unable to express a preference. For example, this setting may tell the hardware how aggressively or conservatively to control frequency in the "turbo range" above the explicitly OS-controlled P-state frequency range. It may also tell the hardware how aggressively is should enter the OS requested C-states. Support for this feature is indicated by CPUID.06H.ECX.bit3 per the Intel Architectures Software Developer's Manual.
Options-c limits operation to a single CPU. The default is to operate on all CPUs. Note that MSR_IA32_ENERGY_PERF_BIAS is defined per logical processor, but that the initial implementations of the MSR were shared among all processors in each package. -v increases verbosity. By default x86_energy_perf_policy is silent. -r is for "read-only" mode - the unchanged state is read and displayed. performance Set a policy where performance is paramount. The processor will be unwilling to sacrifice any performance for the sake of energy saving. This is the hardware default. normal Set a policy with a normal balance between performance and energy efficiency. The processor will tolerate minor performance compromise for potentially significant energy savings. This reasonable default for most desktops and servers. powersave Set a policy where the processor can accept a measurable performance hit to maximize energy efficiency. n Set MSR_IA32_ENERGY_PERF_BIAS to the specified number. The range of valid numbers is 0-15, where 0 is maximum performance and 15 is maximum energy efficiency.
NOTESx86_energy_perf_policy " runs only as root.
FILES.ta /dev/cpu/*/msr
SEE ALSOmsr(4)
AUTHORSWritten by Len Brown <len.brown@intel.com>
0
Johanes Gumabo
Data Size : 7,772 byte
man-x86_energy_perf_policy.8Build : 2024-12-05, 20:55 :
Visitor Screen : x
Visitor Counter ( page / site ) : 2 / 201,927
Visitor ID : :
Visitor IP : 3.138.134.77 :
Visitor Provider : AMAZON-02 :
Provider Position ( lat x lon ) : 39.962500 x -83.006100 : x
Provider Accuracy Radius ( km ) : 1000 :
Provider City : Columbus :
Provider Province : Ohio , : ,
Provider Country : United States :
Provider Continent : North America :
Visitor Recorder : Version :
Visitor Recorder : Library :
Online Linux Manual Page : Version : Online Linux Manual Page - Fedora.40 - march=x86-64 - mtune=generic - 24.12.05
Online Linux Manual Page : Library : lib_c - 24.10.03 - march=x86-64 - mtune=generic - Fedora.40
Online Linux Manual Page : Library : lib_m - 24.10.03 - march=x86-64 - mtune=generic - Fedora.40
Data Base : Version : Online Linux Manual Page Database - 24.04.13 - march=x86-64 - mtune=generic - fedora-38
Data Base : Library : lib_c - 23.02.07 - march=x86-64 - mtune=generic - fedora.36
Very long time ago, I have the best tutor, Wenzel Svojanovsky . If someone knows the email address of Wenzel Svojanovsky , please send an email to johanes_gumabo@yahoo.co.id .
If error, please print screen and send to johanes_gumabo@yahoo.co.id
Under development. Support me via PayPal.
ERROR : Need New Coding : (rof_ta|11|x86_energy_perf_policy.8|94|1|.ta
)