BIO_CTRL - Online Linux Manual PageSection : 3
Updated : 2021-03-26
Source : 1.1.1k
Note : OpenSSL

NAMEBIO_ctrl, BIO_callback_ctrl, BIO_ptr_ctrl, BIO_int_ctrl, BIO_reset, BIO_seek, BIO_tell, BIO_flush, BIO_eof, BIO_set_close, BIO_get_close, BIO_pending, BIO_wpending, BIO_ctrl_pending, BIO_ctrl_wpending, BIO_get_info_callback, BIO_set_info_callback, BIO_info_cb ​− BIO control operations

SYNOPSIS​ #include <openssl/bio.h> ​ ​ typedef int BIO_info_cb(BIO *b, int state, int res); ​ ​ long BIO_ctrl(BIO *bp, int cmd, long larg, void *parg); ​ long BIO_callback_ctrl(BIO *b, int cmd, BIO_info_cb *cb); ​ char *BIO_ptr_ctrl(BIO *bp, int cmd, long larg); ​ long BIO_int_ctrl(BIO *bp, int cmd, long larg, int iarg); ​ ​ int BIO_reset(BIO *b); ​ int BIO_seek(BIO *b, int ofs); ​ int BIO_tell(BIO *b); ​ int BIO_flush(BIO *b); ​ int BIO_eof(BIO *b); ​ int BIO_set_close(BIO *b, long flag); ​ int BIO_get_close(BIO *b); ​ int BIO_pending(BIO *b); ​ int BIO_wpending(BIO *b); ​ size_t BIO_ctrl_pending(BIO *b); ​ size_t BIO_ctrl_wpending(BIO *b); ​ ​ int BIO_get_info_callback(BIO *b, BIO_info_cb **cbp); ​ int BIO_set_info_callback(BIO *b, BIO_info_cb *cb);

DESCRIPTIONBIO_ctrl(), BIO_callback_ctrl(), BIO_ptr_ctrl() and BIO_int_ctrl() are BIO control operations taking arguments of various types. These functions are not normally called directly, various macros are used instead. The standard macros are described below, macros specific to a particular type of BIO are described in the specific BIOs manual page as well as any special features of the standard calls. BIO_reset() typically resets a BIO to some initial state, in the case of file related BIOs for example it rewinds the file pointer to the start of the file. BIO_seek() resets a file related BIO's (that is file descriptor and ​FILE BIOs) file position pointer to ofs bytes from start of file. BIO_tell() returns the current file position of a file related BIO. BIO_flush() normally writes out any internally buffered data, in some cases it is used to signal EOF and that no more data will be written. BIO_eof() returns 1 if the BIO has read EOF, the precise meaning of ​EOF varies according to the BIO type. BIO_set_close() sets the BIO b close flag to flag. flag can take the value BIO_CLOSE or BIO_NOCLOSE. Typically BIO_CLOSE is used in a source/sink BIO to indicate that the underlying I/O stream should be closed when the BIO is freed. BIO_get_close() returns the BIOs close flag. BIO_pending(), BIO_ctrl_pending(), BIO_wpending() and BIO_ctrl_wpending() return the number of pending characters in the BIOs read and write buffers. Not all BIOs support these calls. BIO_ctrl_pending() and BIO_ctrl_wpending() return a size_t type and are functions, BIO_pending() and BIO_wpending() are macros which call BIO_ctrl().

RETURN VALUESBIO_reset() normally returns 1 for success and 0 or −1 for failure. File BIOs are an exception, they return 0 for success and −1 for failure. BIO_seek() and BIO_tell() both return the current file position on success and −1 for failure, except file BIOs which for BIO_seek() always return 0 for success and −1 for failure. BIO_flush() returns 1 for success and 0 or −1 for failure. BIO_eof() returns 1 if EOF has been reached 0 otherwise. BIO_set_close() always returns 1. BIO_get_close() returns the close flag value: BIO_CLOSE or BIO_NOCLOSE. BIO_pending(), BIO_ctrl_pending(), BIO_wpending() and BIO_ctrl_wpending() return the amount of pending data.

NOTESBIO_flush(), because it can write data may return 0 or −1 indicating that the call should be retried later in a similar manner to BIO_write_ex(). The BIO_should_retry() call should be used and appropriate action taken is the call fails. The return values of BIO_pending() and BIO_wpending() may not reliably determine the amount of pending data in all cases. For example in the case of a file BIO some data may be available in the FILE structures internal buffers but it is not possible to determine this in a portably way. For other types of BIO they may not be supported. Filter BIOs if they do not internally handle a particular BIO_ctrl() operation usually pass the operation to the next BIO in the chain. This often means there is no need to locate the required BIO for a particular operation, it can be called on a chain and it will be automatically passed to the relevant BIO. However, this can cause unexpected results: for example no current filter BIOs implement ​BIO_seek(), but this may still succeed if the chain ends in a FILE or file descriptor BIO. Source/sink BIOs return an 0 if they do not recognize the BIO_ctrl() operation.

BUGSSome of the return values are ambiguous and care should be taken. In particular a return value of 0 can be returned if an operation is not supported, if an error occurred, if EOF has not been reached and in the case of BIO_seek() on a file BIO for a successful operation.

COPYRIGHTCopyright 2000−2020 The OpenSSL Project Authors. All Rights Reserved. Licensed under the OpenSSL license (the License). You may not use this file except in compliance with the License. You can obtain a copy in the file LICENSE in the source distribution or at <https://www.openssl.org/source/license.html>.
0
Johanes Gumabo
Data Size   :   18,021 byte
man-BIO_set_info_callback.3sslBuild   :   2024-12-05, 20:55   :  
Visitor Screen   :   x
Visitor Counter ( page / site )   :   2 / 172,972
Visitor ID   :     :  
Visitor IP   :   18.226.186.109   :  
Visitor Provider   :   AMAZON-02   :  
Provider Position ( lat x lon )   :   39.962500 x -83.006100   :   x
Provider Accuracy Radius ( km )   :   1000   :  
Provider City   :   Columbus   :  
Provider Province   :   Ohio ,   :   ,
Provider Country   :   United States   :  
Provider Continent   :   North America   :  
Visitor Recorder   :   Version   :  
Visitor Recorder   :   Library   :  
Online Linux Manual Page   :   Version   :   Online Linux Manual Page - Fedora.40 - march=x86-64 - mtune=generic - 24.12.05
Online Linux Manual Page   :   Library   :   lib_c - 24.10.03 - march=x86-64 - mtune=generic - Fedora.40
Online Linux Manual Page   :   Library   :   lib_m - 24.10.03 - march=x86-64 - mtune=generic - Fedora.40
Data Base   :   Version   :   Online Linux Manual Page Database - 24.04.13 - march=x86-64 - mtune=generic - fedora-38
Data Base   :   Library   :   lib_c - 23.02.07 - march=x86-64 - mtune=generic - fedora.36

Very long time ago, I have the best tutor, Wenzel Svojanovsky . If someone knows the email address of Wenzel Svojanovsky , please send an email to johanes_gumabo@yahoo.co.id .
If error, please print screen and send to johanes_gumabo@yahoo.co.id
Under development. Support me via PayPal.

ERROR : Need New Coding :         (parse_manual_page_|249|B___IO_callback_ctrl.3ssl|36/37|el══─{─══.|.el══─{─══. ds -- \|\(em\| )         (htmlprn|149|B___IO_callback_ctrl.3ssl|36/37|.el══─{─══. ds --  —  |.el══─{─══. ds -- \|\(em\| )         (parse_manual_page_|249|B___IO_callback_ctrl.3ssl|43|br══─}─══|'br══─}─══ )         (htmlprn|149|B___IO_callback_ctrl.3ssl|43|'br══─}─══ |'br══─}─══ )