curs_getch - Online Linux Manual PageSection : 3X
Updated :
NAMEgetch, wgetch, mvgetch, mvwgetch, ungetch, has_key − get (or push back) characters from curses terminal keyboard
SYNOPSIS#include <curses.h> int getch(void);
int wgetch(WINDOW *win); int mvgetch(int y, int x);
int mvwgetch(WINDOW *win, int y, int x); int ungetch(int ch); /* extension */
int has_key(int ch);
DESCRIPTION
Reading charactersThe getch, wgetch, mvgetch and mvwgetch, routines read a character from the window. In no-delay mode, if no input is waiting, the value ERR is returned. In delay mode, the program waits until the system passes text through to the program. Depending on the setting of cbreak, this is after one character (cbreak mode), or after the first newline (nocbreak mode). In half-delay mode, the program waits until a character is typed or the specified timeout has been reached. If echo is enabled, and the window is not a pad, then the character will also be echoed into the designated window according to the following rules: • If the character is the current erase character, left arrow, or backspace, the cursor is moved one space to the left and that screen position is erased as if delch had been called. • If the character value is any other KEY_ define, the user is alerted with a beep call. • If the character is a carriage-return, and if nl is enabled, it is translated to a line-feed after echoing. • Otherwise the character is simply output to the screen. If the window is not a pad, and it has been moved or modified since the last call to wrefresh, wrefresh will be called before another character is read.
Keypad modeIf keypad is TRUE, and a function key is pressed, the token for that function key is returned instead of the raw characters: • The predefined function keys are listed in <curses.h> as macros with values outside the range of 8-bit characters. Their names begin with KEY_. • Other (user-defined) function keys which may be defined using define_key(3X) have no names, but also are expected to have values outside the range of 8-bit characters. Thus, a variable intended to hold the return value of a function key must be of short size or larger. When a character that could be the beginning of a function key is received (which, on modern terminals, means an escape character), curses sets a timer. If the remainder of the sequence does not come in within the designated time, the character is passed through; otherwise, the function key value is returned. For this reason, many terminals experience a delay between the time a user presses the escape key and the escape is returned to the program. In ncurses, the timer normally expires after the value in ESCDELAY (see curs_variables(3X)). If notimeout is TRUE, the timer does not expire; it is an infinite (or very large) value. Because function keys usually begin with an escape character, the terminal may appear to hang in notimeout mode after pressing the escape key until another key is pressed.
Ungetting charactersThe ungetch routine places ch back onto the input queue to be returned by the next call to wgetch. There is just one input queue for all windows.
Predefined key-codesThe following special keys are defined in <curses.h>. • Except for the special case KEY_RESIZE, it is necessary to enable keypad for getch to return these codes. • Not all of these are necessarily supported on any particular terminal. • The naming convention may seem obscure, with some apparent misspellings (such as ‟RSUME” for ‟resume”). The names correspond to the long terminfo capability names for the keys, and were defined long ago, in the 1980s. NameKey name KEY_BREAKBreak key KEY_DOWNThe four arrow keys ... KEY_UP KEY_LEFT KEY_RIGHT KEY_HOMEHome key (upward+left arrow) KEY_BACKSPACEBackspace KEY_F0 Function keys; space for 64 keys is reserved. KEY_F(n) For 0 ≤ n ≤ 63 KEY_DLDelete line KEY_ILInsert line KEY_DCDelete character KEY_ICInsert char or enter insert mode KEY_EICExit insert char mode KEY_CLEARClear screen KEY_EOSClear to end of screen KEY_EOLClear to end of line KEY_SFScroll 1 line forward KEY_SRScroll 1 line backward (reverse) KEY_NPAGENext page KEY_PPAGEPrevious page KEY_STABSet tab KEY_CTABClear tab KEY_CATABClear all tabs KEY_ENTEREnter or send KEY_SRESETSoft (partial) reset KEY_RESETReset or hard reset KEY_PRINTPrint or copy KEY_LLHome down or bottom (lower left) KEY_A1Upper left of keypad KEY_A3Upper right of keypad KEY_B2Center of keypad KEY_C1Lower left of keypad KEY_C3Lower right of keypad KEY_BTABBack tab key KEY_BEGBeg(inning) key KEY_CANCELCancel key KEY_CLOSEClose key KEY_COMMANDCmd (command) key KEY_COPYCopy key KEY_CREATECreate key KEY_ENDEnd key KEY_EXITExit key KEY_FINDFind key KEY_HELPHelp key KEY_MARKMark key KEY_MESSAGEMessage key KEY_MOUSEMouse event read KEY_MOVEMove key KEY_NEXTNext object key KEY_OPENOpen key KEY_OPTIONSOptions key KEY_PREVIOUSPrevious object key KEY_REDORedo key KEY_REFERENCERef(erence) key KEY_REFRESHRefresh key KEY_REPLACEReplace key KEY_RESIZEScreen resized KEY_RESTARTRestart key KEY_RESUMEResume key KEY_SAVESave key KEY_SBEGShifted beginning key KEY_SCANCELShifted cancel key KEY_SCOMMANDShifted command key KEY_SCOPYShifted copy key KEY_SCREATEShifted create key KEY_SDCShifted delete char key KEY_SDLShifted delete line key KEY_SELECTSelect key KEY_SENDShifted end key KEY_SEOLShifted clear line key KEY_SEXITShifted exit key KEY_SFINDShifted find key KEY_SHELPShifted help key KEY_SHOMEShifted home key KEY_SICShifted input key KEY_SLEFTShifted left arrow key KEY_SMESSAGEShifted message key KEY_SMOVEShifted move key KEY_SNEXTShifted next key KEY_SOPTIONSShifted options key KEY_SPREVIOUSShifted prev key KEY_SPRINTShifted print key KEY_SREDOShifted redo key KEY_SREPLACEShifted replace key KEY_SRIGHTShifted right arrow KEY_SRSUMEShifted resume key KEY_SSAVEShifted save key KEY_SSUSPENDShifted suspend key KEY_SUNDOShifted undo key KEY_SUSPENDSuspend key KEY_UNDOUndo key Keypad is arranged like this:
A1upA3 leftB2right C1downC3 A few of these predefined values do not correspond to a real key: • KEY_RESIZE is returned when the SIGWINCH signal has been detected (see initscr(3X) and resizeterm(3X)). This code is returned whether or not keypad has been enabled. • KEY_MOUSE is returned for mouse-events (see curs_mouse(3X)). This code relies upon whether or not keypad(3X) has been enabled, because (e.g., with xterm mouse prototocol) ncurses must read escape sequences, just like a function key.
Testing key-codesThe has_key routine takes a key-code value from the above list, and returns TRUE or FALSE according to whether the current terminal type recognizes a key with that value. The library also supports these extensions: define_key defines a key-code for a given string (see define_key(3X)). key_defined checks if there is a key-code defined for a given string (see key_defined(3X)).
RETURN VALUEAll routines return the integer ERR upon failure and an integer value other than ERR (OK in the case of ungetch) upon successful completion. ungetch returns ERR if there is no more room in the FIFO. wgetch returns ERR if the window pointer is null, or if its timeout expires without having any data, or if the execution was interrupted by a signal (errno will be set to EINTR). Functions with a ‟mv” prefix first perform a cursor movement using wmove, and return an error if the position is outside the window, or if the window pointer is null.
NOTESUse of the escape key by a programmer for a single character function is discouraged, as it will cause a delay of up to one second while the keypad code looks for a following function-key sequence. Some keys may be the same as commonly used control keys, e.g., KEY_ENTER versus control/M, KEY_BACKSPACE versus control/H. Some curses implementations may differ according to whether they treat these control keys specially (and ignore the terminfo), or use the terminfo definitions. Ncurses uses the terminfo definition. If it says that KEY_ENTER is control/M, getch will return KEY_ENTER when you press control/M. Generally, KEY_ENTER denotes the character(s) sent by the Enter key on the numeric keypad: • the terminal description lists the most useful keys, • the Enter key on the regular keyboard is already handled by the standard ASCII characters for carriage-return and line-feed, • depending on whether nl or nonl was called, pressing ‟Enter” on the regular keyboard may return either a carriage-return or line-feed, and finally • ‟Enter or send” is the standard description for this key. When using getch, wgetch, mvgetch, or mvwgetch, nocbreak mode (nocbreak) and echo mode (echo) should not be used at the same time. Depending on the state of the tty driver when each character is typed, the program may produce undesirable results. Note that getch, mvgetch, and mvwgetch may be macros. Historically, the set of keypad macros was largely defined by the extremely function-key-rich keyboard of the AT&T 7300, aka 3B1, aka Safari 4. Modern personal computers usually have only a small subset of these. IBM PC-style consoles typically support little more than KEY_UP, KEY_DOWN, KEY_LEFT, KEY_RIGHT, KEY_HOME, KEY_END, KEY_NPAGE, KEY_PPAGE, and function keys 1 through 12. The Ins key is usually mapped to KEY_IC.
PORTABILITYThe *get* functions are described in the XSI Curses standard, Issue 4. They read single-byte characters only. The standard specifies that they return ERR on failure, but specifies no error conditions. The echo behavior of these functions on input of KEY_ or backspace characters was not specified in the SVr4 documentation. This description is adopted from the XSI Curses standard. The behavior of getch and friends in the presence of handled signals is unspecified in the SVr4 and XSI Curses documentation. Under historical curses implementations, it varied depending on whether the operating system's implementation of handled signal receipt interrupts a read(2) call in progress or not, and also (in some implementations) depending on whether an input timeout or non-blocking mode has been set. KEY_MOUSE is mentioned in XSI Curses, along with a few related terminfo capabilities, but no higher-level functions use the feature. The implementation in ncurses is an extension. KEY_RESIZE is an extension first implemented for ncurses. NetBSD curses later added this extension. Programmers concerned about portability should be prepared for either of two cases: (a) signal receipt does not interrupt getch; (b) signal receipt interrupts getch and causes it to return ERR with errno set to EINTR. The has_key function is unique to ncurses. We recommend that any code using it be conditionalized on the NCURSES_VERSION feature macro.
SEE ALSOcurses(3X), curs_inopts(3X), curs_mouse(3X), curs_move(3X), curs_outopts(3X), curs_refresh(3X), curs_variables(3X), resizeterm(3X). Comparable functions in the wide-character (ncursesw) library are described in curs_get_wch(3X). 0
Johanes Gumabo
Data Size : 56,745 byte
man-mvwgetch.3xBuild : 2024-12-05, 20:55 :
Visitor Screen : x
Visitor Counter ( page / site ) : 2 / 184,221
Visitor ID : :
Visitor IP : 18.226.34.148 :
Visitor Provider : AMAZON-02 :
Provider Position ( lat x lon ) : 39.962500 x -83.006100 : x
Provider Accuracy Radius ( km ) : 1000 :
Provider City : Columbus :
Provider Province : Ohio , : ,
Provider Country : United States :
Provider Continent : North America :
Visitor Recorder : Version :
Visitor Recorder : Library :
Online Linux Manual Page : Version : Online Linux Manual Page - Fedora.40 - march=x86-64 - mtune=generic - 24.12.05
Online Linux Manual Page : Library : lib_c - 24.10.03 - march=x86-64 - mtune=generic - Fedora.40
Online Linux Manual Page : Library : lib_m - 24.10.03 - march=x86-64 - mtune=generic - Fedora.40
Data Base : Version : Online Linux Manual Page Database - 24.04.13 - march=x86-64 - mtune=generic - fedora-38
Data Base : Library : lib_c - 23.02.07 - march=x86-64 - mtune=generic - fedora.36
Very long time ago, I have the best tutor, Wenzel Svojanovsky . If someone knows the email address of Wenzel Svojanovsky , please send an email to johanes_gumabo@yahoo.co.id .
If error, please print screen and send to johanes_gumabo@yahoo.co.id
Under development. Support me via PayPal.