USERDEL - Online Linux Manual PageSection : 8
Updated : 03/06/2023
Source : shadow−utils 4.13
Note : System Management Commands
NAMEuserdel − delete a user account and related files
SYNOPSISuserdel [options] LOGIN
DESCRIPTIONThe userdel command modifies the system account files, deleting all entries that refer to the user name LOGIN. The named user must exist.
OPTIONSThe options which apply to the userdel command are: −f, −−force This option forces the removal of the user account, even if the user is still logged in. It also forces userdel to remove the user's home directory and mail spool, even if another user uses the same home directory or if the mail spool is not owned by the specified user. If USERGROUPS_ENAB is defined to yes in /etc/login.defs and if a group exists with the same name as the deleted user, then this group will be removed, even if it is still the primary group of another user. Note: This option is dangerous and may leave your system in an inconsistent state. −h, −−help Display help message and exit. −r, −−remove Files in the user's home directory will be removed along with the home directory itself and the user's mail spool. Files located in other file systems will have to be searched for and deleted manually. The mail spool is defined by the MAIL_DIR variable in the login.defs file. −R, −−root CHROOT_DIR Apply changes in the CHROOT_DIR directory and use the configuration files from the CHROOT_DIR directory. Only absolute paths are supported. −P, −−prefix PREFIX_DIR Apply changes in the PREFIX_DIR directory and use the configuration files from the PREFIX_DIR directory. This option does not chroot and is intended for preparing a cross−compilation target. Some limitations: NIS and LDAP users/groups are not verified. PAM authentication is using the host files. No SELINUX support. −Z, −−selinux−user Remove any SELinux user mapping for the user's login.
CONFIGURATIONThe following configuration variables in /etc/login.defs change the behavior of this tool: MAIL_DIR (string) The mail spool directory. This is needed to manipulate the mailbox when its corresponding user account is modified or deleted. If not specified, a compile−time default is used. The parameter CREATE_MAIL_SPOOL in /etc/default/useradd determines whether the mail spool should be created. MAIL_FILE (string) Defines the location of the users mail spool files relatively to their home directory. The MAIL_DIR and MAIL_FILE variables are used by useradd, usermod, and userdel to create, move, or delete the user's mail spool. If MAIL_CHECK_ENAB is set to yes, they are also used to define the MAIL environment variable. MAX_MEMBERS_PER_GROUP (number) Maximum members per group entry. When the maximum is reached, a new group entry (line) is started in /etc/group (with the same name, same password, and same GID). The default value is 0, meaning that there are no limits in the number of members in a group. This feature (split group) permits to limit the length of lines in the group file. This is useful to make sure that lines for NIS groups are not larger than 1024 characters. If you need to enforce such limit, you can use 25. Note: split groups may not be supported by all tools (even in the Shadow toolsuite). You should not use this variable unless you really need it. USERDEL_CMD (string) If defined, this command is run when removing a user. It should remove any at/cron/print jobs etc. owned by the user to be removed (passed as the first argument). The return code of the script is not taken into account. Here is an example script, which removes the user's cron, at and print jobs: #! /bin/sh
# Check for the required argument.
if [ $# != 1 ]; then
echo "Usage: $0 username"
exit 1
fi
# Remove cron jobs.
crontab −r −u $1
# Remove at jobs.
# Note that it will remove any jobs owned by the same UID,
# even if it was shared by a different username.
AT_SPOOL_DIR=/var/spool/cron/atjobs
find $AT_SPOOL_DIR −name "[^.]*" −type f −user $1 −delete \;
# Remove print jobs.
lprm $1
# All done.
exit 0
USERGROUPS_ENAB (boolean) Enable setting of the umask group bits to be the same as owner bits (examples: 022 −> 002, 077 −> 007) for non−root users, if the uid is the same as gid, and username is the same as the primary group name. If set to yes, userdel will remove the user's group if it contains no more members, and useradd will create by default a group with the name of the user.
FILES/etc/group Group account information. /etc/login.defs Shadow password suite configuration. /etc/passwd User account information. /etc/shadow Secure user account information. /etc/shadow−maint/userdel−pre.d/*, /etc/shadow−maint/userdel−post.d/* Run−part files to execute during user deletion. The environment variable ACTION will be populated with userdel and SUBJECT with the username. userdel−pre.d will be executed prior to any user deletion. userdel−post.d will execute after user deletion. If a script exits non−zero then execution will terminate. /etc/subgid Per user subordinate group IDs. /etc/subuid Per user subordinate user IDs.
EXIT VALUESThe userdel command exits with the following values: 0 success 1 can't update password file 2 invalid command syntax 6 specified user doesn't exist 8 user currently logged in 10 can't update group file 12 can't remove home directory
CAVEATSuserdel will not allow you to remove an account if there are running processes which belong to this account. In that case, you may have to kill those processes or lock the user's password or account and remove the account later. The −f option can force the deletion of this account. You should manually check all file systems to ensure that no files remain owned by this user. You may not remove any NIS attributes on a NIS client. This must be performed on the NIS server. If USERGROUPS_ENAB is defined to yes in /etc/login.defs, userdel will delete the group with the same name as the user. To avoid inconsistencies in the passwd and group databases, userdel will check that this group is not used as a primary group for another user, and will just warn without deleting the group otherwise. The −f option can force the deletion of this group.
SEE ALSOchfn(1), chsh(1), passwd(1), login.defs(5), gpasswd(8), groupadd(8), groupdel(8), groupmod(8), subgid(5), subuid(5), useradd(8), usermod(8). 0
Johanes Gumabo
Data Size : 26,479 byte
man-userdel.8Build : 2024-12-29, 07:25 :
Visitor Screen : x
Visitor Counter ( page / site ) : 3 / 257,507
Visitor ID : :
Visitor IP : 3.133.131.180 :
Visitor Provider : AMAZON-02 :
Provider Position ( lat x lon ) : 39.962500 x -83.006100 : x
Provider Accuracy Radius ( km ) : 1000 :
Provider City : Columbus :
Provider Province : Ohio , : ,
Provider Country : United States :
Provider Continent : North America :
Visitor Recorder : Version :
Visitor Recorder : Library :
Online Linux Manual Page : Version : Online Linux Manual Page - Fedora.40 - march=x86-64 - mtune=generic - 24.12.29
Online Linux Manual Page : Library : lib_c - 24.10.03 - march=x86-64 - mtune=generic - Fedora.40
Online Linux Manual Page : Library : lib_m - 24.10.03 - march=x86-64 - mtune=generic - Fedora.40
Data Base : Version : Online Linux Manual Page Database - 24.04.13 - march=x86-64 - mtune=generic - fedora-38
Data Base : Library : lib_c - 23.02.07 - march=x86-64 - mtune=generic - fedora.36
Very long time ago, I have the best tutor, Wenzel Svojanovsky . If someone knows the email address of Wenzel Svojanovsky , please send an email to johanes_gumabo@yahoo.co.id .
If error, please print screen and send to johanes_gumabo@yahoo.co.id
Under development. Support me via PayPal.